Safco 8916 User manual

MODEL
NUMBER 8916
8916-37: 1 of 2; 04/02
TOOLS REQUIRED: Phillips Screwdriver
Tabletop Lectern
ASSEMBLED UNIT
MODEL 8916
For questions or concerns, please call
Safco Consumer Hot Line 1-800-664-0042
available Monday-Friday 8:00 AM to 4:30 PM (Central Time)
(English-speaking operators)
ASSEMBLY INSTRUCTIONS
Safco Products Company, New Hope, MN 55428
QQ
QQ
Q
A
QQ
QQ
Q
B
QQ
QQ
Q
E
QQ
QQ
Q
D
QQ
QQ
Q
C
QQ
QQ
Q
F
QQ
QQ
Q
G
Work on a smooth, clean surface. Locate the
A Back Panel and position it with the large
holes upward (the beveled edge is the upper
end of this panel). Arrange the B Left Side
Panel and the C Right Side Panel on the left
and right sides of the Back Panel with the
holes upward and the slanted ends toward the
upper end of the Back Panel. Place the D
Shelf at the bottom. Put the E Top Panel
at the upper end of the Back Panel with the
holes up.
Insert F Cams into the large holes on the
Shelf, Left Side Panel, Right Side Panel and
Back Panel with the arrows pointing toward
the nearest SIDE edge.
Screw the G Screw Posts into the smaller
holes on the Left Side Panel, Right Side Panel
and Top Panel.
1QQ
QQ
Q
QQ
QQ
Q
QQ
QQ
QQQ
QQ
Q
QQ
QQ
Q
QQ
QQ
Q
C
QQ
QQ
Q
BQQ
QQ
Q
D
QQ
QQ
Q
E
QQ
QQ
Q
QQ
QQ
Q
F
QQ
QQ
Q
G
QQ
QQ
Q
A
QQ
QQ
Q
BEVELED
EDGE
Back Panel 1 8916-01
Left Side Panel 1 8916-02
Right Side Panel 1 8916-03
Shelf 1 8916-04
Top 1 8916-05
Locking Cam 12 HFFMFC
Screw Post 12 HFFMFB
Q
Q
Q
Q
Q
Q
Q
LETTER
CODE DESCRIPTION QTY. PART NO.
PARTS LIST
Sort and count your parts!
A
B
C
D
E
F
G
When ordering replacement parts,
please specify color.

8916-37: 2 of 2; 04/02 Safco Products Company, New Hope, MN 55428
Lift the A Rear Panel over the B Left Side Panel.
Align the holes in the edge of the Rear Panel (next
to the Cams F ) with the G Screw Posts on the
rear edge of the Left Side Panel. Slide the Rear
Panel down onto the Screw Posts, and fasten by
turning each of the cams clockwise until they stop.
IMPORTANT: to prevent possible damage during
assembly, support the Back Panel in the upright
position.
2Now slide the D Shelf over the center Screw Posts
of the Left Side Panel (making sure the Locking
Cams are still facing the edge), with the Cam side
toward the bottom of the Side Panel and the long
unfinished edge toward the Back Panel. Secure the
Cams as in step 2.
3
Carefully position the C Right Side Panel over the
Rear Panel and Lower Shelf. With the arrows on the
Cams pointing toward the Screw Posts, slide the
Screw Posts on the Right Side Panel down into the
edge holes, and tighten all Cams as before.
4Position the unit with the slanted end upward. With
the pencil groove toward the rear of the unit, slide
the Screw Posts on the E Top down into the edge
holes, and fasten the remaining Cams.
5
QQ
QQ
QQQ
QQ
Q
QQ
QQ
QQQ
QQ
Q
QQ
QQ
Q
B
A
QQ
QQ
Q
QQ
QQ
Q
QQ
QQ
Q
D
QQ
QQ
Q
QQ
QQ
Q
UNFINISHED
EDGE
QQ
QQ
Q
C
QQ
QQ
Q
QQ
QQ
Q
E
QQ
QQ
Q
PENCIL
GROOVE
BOTTOM
BACK
EDGE
F
G