SafeGuardian CareCaller LTE Pendant User manual

Using the Speakerphone
Turn Voice Prompts On/Off
13.
14.

Lanyard hole
SOS button
Microphone
Front
Front Layout
21
Loudspeaker
Charging contacts
Back
Back Layout

What Do the Lights Mean
Cellular signal indicator - - Green
Green Light shows a single flash
rapidly every 3 seconds
Light shows a double flash
rapidly every 3 seconds
Means The device has a stable
Cellular signal
The device is registered to
the Cellular network
Blue Light shows a double flash
rapidly every 3 seconds Light Off
Means The device has latest
location fix
The device is not fixing the
latest location
Positioning indicator - - Blue
Blue Light shows a single flash rapidly every 3 seconds
Means The device has no latest location fix
Red Red Blinking Quickly Red Off or blinking slowly
Red ON (solid)
BLE connected
Device has been fully
charged
Red shows a double flash
rapidly every 3 seconds
Means Battery power is lower
than 20% The device is charging
Power indicator - - Red
Red
Means
43
Cellular signal
indicator - Green
Positioning
indicator - Blue
Power
indicator - Red
ON/OFF button
Volume (+)
increase button
Volume (-)
decrease button
Left Side
Side Layout

5 6
Connecting
Magnetic Cable
Connecting
Charging Base
If you are using the optional charging stand, plug
the USB charging cable into the charging base.

7 8
Plug into AC Outlet
Plug the charging cable or charging stand into
the wall using the enclosed AC/USB adapter
Charging the Device
Place the device into the cradle. Rock it slowly
until it snaps into place and the red LED light
glows.

9 10
Placing a Call
Press the “SOS” button for 2-3 seconds until the
device announces “You have activated...” then
release. There will be a brief silence while the
device places your call
DO NOT PRESS THE SOS BUTTON A SECOND
TIME AS IT WILL DISCONNECT THE CALL
Turning Device "On"
There are three ways to turn the device on:
1.Snap into the charging stand until the red light
on the front lights up.
2.Attach the magnetic charging cord.
3.Press the top grey button.
When the device turns on, the LED lights on
the side will begin to blink.
Wait at least one minute before pressing the
“SOS” button to allow the device time to
acquire the cellular network.
"On" Button /
LED Lights

11 12
Using the Speakerphone
The device will call/text the first pre-set contact. If no
answer, it will call the second contact, third, etc.
When the call is answered, simply speak to the
contact using the built-in hands-free speaker phone.
To adjust the speakerphone volume louder or
quieter, press the +/- grey buttons on the side.
Disconecting a Call
Press the SOS button to disconnect the call

13 14
Turn Voice Prompts On/Off
To turn voice prompts On/Off: Double click on
the lower side grey button.
Turning Device "Off"
To turn off the device: Press and hold the top side
button and SOS button together until the device
vibrates then let go. The device will power down and
the LED lights will turn off within 60 seconds.