Safescan 2610 User manual

www.safescan.com 1
USER MANUAL
ENGLISH | NEDERLANDS | DEUTSCH | FRANÇAIS | ESPAÑOL | ITALIANO |
PORTUGUÊS | POLSKI | ČESKY | MAGYAR | SLOVENSKÝ
SAFESCAN 2610 / 2650
BANKNOTE COUNTER

www.safescan.com2
INTRODUCTION
Thank you for purchasing a Safescan 2600-series banknote counter. This user manual will help you to get started with your
Safescan banknote counter and describes the setup and operating procedures. We recommend that before using the device
you carefully read these operating instructions.
PRODUCT
1. Hopper with adjustable guides
2. Front panel (display / buttons)
3. Stacker
4. Power connection
5. On/Off switch
6. RJ12 port for external display
connection
7. Hopper adjustment wheel
8. Power cord(s)*
9. Maintenance kit
* depending on model / country specification
PACKAGE CONTENTS
The retail box contains the following items:
• Safescan 2610 / 2650 Banknote Counter
• Power cord(s)*
• Maintenance kit
• User Manual
1
2
3
FRONT BACK
5
6
7
9
8
4
ENGLISH

www.safescan.com 3
AVAILABLE ACCESSORIES
SAFESCAN 2610 / 2650: FEATURES
• Safescan Cleaning Cards for banknote counters (pack of 20 cards), partnumber 136-0546.
See www.safescan.com for details.
BANKNOTE FEATURE DETECTION
UV feature
detection
UV and MG
feature detection
SIZE (height)
in ‘sort’ count mode only
Safescan 2610 •—•
Safescan 2650 • • •
BUTTONS AND OPERATION
01. Start counting / Confirm selection in menu mode
02. Clear the number of counted banknotes / Go back 1 level (in MENU mode)
03. Add function on/off
04. Counterfeit detection settings: UV -> MG (2650 only) -> UV + MG (2650 only) -> No detection
05. Counting method settings: COUNT (free count, no size detection) or SORT (count sorted banknotes
including size detection)
06. Batch function on/off and set batch number
07. Open / close device menu
08. Automatic / Manual counting start
2610/2650 series_Silkscreen alignment
BATCH
50
ALL
SORTAUTO
04 07 0803 05 0601 0102 02
ENGLISH

www.safescan.com4
GETTING STARTED
1. Place the device on a flat and stable surface.
Switch on the banknote counter by pushing the power
switch at the back in the “1” position.
Connect the banknote counter to the mains outlet using
the supplied power cord.
Default banknote feature detection settings: Safescan
2610: UV / Safescan 2650: UV and MG. These can be
changed: by pressing the DETECT button.
The sequence is UV -> UV + MG* -> No detection
(*Safescan 2650 only)
2.
4.3.
ON
ALL
COUNTAUTO
ALL
COUNTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ADD
BATCH
100
READY FOR COUNTING
The machine is now ready for basic counting. More advanced settings are described in the next chapters of this manual.
ENGLISH

www.safescan.com 5
COUNTING BANKNOTES
COUNTING MODE. Press the MODE key to select the desired counting method. Default setting = SORT.
The following counting modes can be selected:
[SORT]: banknote counting including size detection. The counter will stop and sound an alarm if a banknote of a different
height than the first counted banknote has been detected.
[COUNT]: banknote counting without size detection, also referred to as “free sheet counting”.
1.
AUTO START / MANUAL START. By pressing the AUTO button, you can select whether you want the banknote
counter to start counting automatically or manually. When the screen shows ‘AUTO’, the machine will start counting once
banknotes have been placed in the hopper. Default setting = AUTO.
When the device is set to “Manual”, press the [START] button to start counting.
2.
START COUNTING BANKNOTES
Start your count by placing the banknotes in the
center of the hopper. Use the hopper guides to
keep the banknotes centered.
PLEASE NOTE
In SORT mode, the banknotes have to be sorted
per denomination before counting.
In COUNT mode, banknotes do not need to be
sorted. Please be advised that in this mode the
device simply counts the number of notes that are
being fed through the machine, no matter which
denominations are in the stack of notes.
3.
ALL
COUNTAUTO
ALL
COUNTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ADD
BATCH
100
ALL
COUNTAUTO
ALL
COUNTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ADD
BATCH
100
ENGLISH

www.safescan.com6
ALL
COUNTAUTO
ALL
SORTAUTO
DIFFERENT DENOMINATION
ALL
COUNTAUTO
ALL
SORTAUTO
DIFFERENT DENOMINATION
WHEN COUNTING HAS FINISHED
The number of banknotes is shown clearly after the count has finished (valid for both COUNT and SORT counting modes).
4.
BANKNOTE SIZE DETECTION (SORT COUNT MODE ONLY).
When SORT counting has been selected, the banknote counter will stop and give a ‘height error’ notification once
it has detected a differently sized banknote during counting. The counter will only detect banknotes with a different
height than the first banknote counted (minimum detectable height difference = 3mm).
5.
ENGLISH

www.safescan.com 7
DEVICE MENU
In the device menu of the 2610 / 2650 you can define specific settings of the machine. To enter the menu, press the
MENU button
1.
ALL
COUNTAUTO
ALL
COUNTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ADD
BATCH
100
The display now shows the various selectable menu items.
2.
Navigate through the menu items with the arrow keys.
3.
Press the START button to select the desired item. The setting within the slected item starts blinking.
4.
ENGLISH

www.safescan.com8
Navigate through the various possible settings by using the arrow keys.
5.
Confirm your selection by pressing the START button.
6.
After settings have been done, exit the menu by pressing the MENU or the CLR button. The banknote counter will return
to the main screen.
7.
MENU CONTENT
The structure of the menu is as follows:
MODEL MODE DETECTION SPEED* SENSITIVITY LEVEL
2610 Count > Sort UV 1 > 2 > 3 UV > Height
2650 Count > Sort UV > MG > UV+MG 1 > 2 > 3 UV > MG > Height
* SPEED SETTINGS: “1” = 800 notes/minute | “2“ = 1200 notes/minute | “3” = 1500 notes/minute
ENGLISH

www.safescan.com 9
1. A D D
The ADD function enables you to count cumulatively. Once you remove a stack of counted banknotes and add a new
stack, these quantities will be added to the total count.
The function can be activated by pressing the ADD button. The indicator in the display will light up.
2. BATCH.
The BATCH function enables you to create equal stacks of a pre-set number of banknotes. The counter will stop
counting when the set batch number has been reached. You can set the batch number as follows:
2.1 Press the BATCH button to activate the function. The indicator in the display lights up and the batch quantity is
blinking for 5 seconds.
2.2 While the amount is blinking, you can navigate through the preset batch numbers by pressing the BATCH button
again. The sequence is 100 > 50 > 20 > 10 > 5 > Batch off.
ALL
COUNTAUTO
ALL
COUNTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ADD
BATCH
100
ALL
COUNTAUTO
ALL
COUNTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ALL
SORTAUTO
ADD
BATCH
100
ALL
SORTAUTO
ALL
SORTAUTO
BATCH
51
BATCH
50
ADD AND BATCH FUNCTIONS
ENGLISH

www.safescan.com10
UV SUSPECTED
MG SUSPECTED
HEIGHT ERROR
SLANT NOTES
INCOMPLETE NOTES
DOUBLE NOTES
RECEIVER STACKER FULL
UV SUSPECTED
MG SUSPECTED
HEIGHT ERROR
SLANT NOTES
INCOMPLETE NOTES
DOUBLE NOTES
RECEIVER STACKER FULL
UV SUSPECTED
MG SUSPECTED
HEIGHT ERROR
SLANT NOTES
INCOMPLETE NOTES
DOUBLE NOTES
RECEIVER STACKER FULL
UV SUSPECTED
MG SUSPECTED
HEIGHT ERROR
SLANT NOTES
INCOMPLETE NOTES
DOUBLE NOTES
RECEIVER STACKER FULL
ALL
SORTAUTO
ALL
SORTAUTO
BATCH
51
BATCH
50
2.3 Use the arrow keys to increase or decrease the batch number 1 piece, starting from the number that is blinking.
When the display shows ‘50’, you can go to 51, 52 etc. by pressing and to 49, 48 etc. by pressing .
5 seconds after you have made your choice, the number stops blinking and your batch number is saved.
Counterfeit or suspicious banknote: UV features not
detected. Remove the suspect banknote from the
stacker and press START to continue.
Sometimes banknotes are stuck or folded together.
Check the banknotes and re-count. If this error message
occurs frequently, adjust the hopper adjustment wheel
slightly (+).
Counterfeit or suspicious banknote. MG features not
detected. Remove the banknote from the stacker and
press START to continue (Safescan 2650 only).
A banknote with a different height has been detected.
Remove the different banknote denomination, remove
the counted notes and re-count the bundle.
ERROR MESSAGES
The machine will give you a clear audibe and visual notification when a suspected banknote is detected or when a
banknote is detected which differs in height from the other notes that are being counted (SORT mode). The following
messages can be shown:
ENGLISH