Safescan 85 User manual

NEDERLANDSDEUTSCHFRANçAISESPAÑOLITALIANOPORTUGUÊS
85
Counterfeit Detector
With 3-point counterfeit detection
Manual

Safescan 85
Counterfeit Detector
02
Thank you for purchasing the Safescan 85 Counterfeit Detector. You have purchased a product of
outstanding simplicity and quality. It distinguishes counterfeit banknotes from genuine ones. It detects
banknote features such as magnetic ink, metal thread and UV characteristics. This machine is the latest
anti-counterfeit machine and uses the most advanced technologies available.
1. Parts of the machine
1. POWER SWITCH
2. SOFTWARE UPGRADE PORT
3. ADAPTOR INPUT (DC 5V)
4. “ON” INDICATOR
5. “EUR” INDICATOR
6. “GBP” INDICATOR
7. BATTERY LID
2. Operating the machine
Open the battery lid on the back and place 3 AAA Batteries.
1. Turn on the power switch
2. Insert the banknote as pictured below (with the watermark on the right hand side), when inserted correctly a
beep will sound.
3. Pull the note through the machine horizontally to the right at a medium speed.
4. When the note is genuine, the currency indicator will flash, when the note is false the “On” indicator will flash
and you will hear a warning sound.
WARNING LIGHT & SOUND
1 X
2 X
3 X
REASON
MG FAILURE
SECURITY THREAD FAILURE
IR FAILURE
PULL TO THE RIGHT
INSERT

ENGLISHNEDERLANDSDEUTSCHFRANçAISESPAÑOLITALIANOPORTUGUÊS
03
ENGLISH |
NOTES:
• Auto switch off: The machine automatically switches to standby mode after 5 minutes (you do need to switch
off with the power switch as the machine is still using power in standby mode)
• If the blue light is blinking, the batteries need to be changed
• To avoid detection errors, please tidy up the notes and do not test the following notes:
A. Seriously dirty notes
B. Torn, fragmentary notes
C. Notes stuck together with sticky tape or other adhesive.
3. Maintenance
Clean all the sensors in the machine regularly, as described below: (See figure 3)
A.Remove the upper cover carefully.
B.Clean the dust on the surface of the sensors with the clean brush, or a cotton tip with alcohol.
C Reinstall the upper cover
Do not take out the sensors or try to disassemble product.
4. Technical Specifications
Operating temperature
Ambient humidity
Power source
Power consumption after power-off
Dimensions
Net weight
5. Warranty
Warranty procedure
Contact Safescan for assistance: www.safescan.com
0º ~ 40º Celsius
< 90%
3 x AAA batteries or 4.5V adaptor 220V
≤100 -150µA
95x61x25mm
73g
FIGURE. 3 UPPER COVER
SUBASSEMBLY
LOCK
MID COVER
SENSOR
This product is in compliance with the essential requirements and other relevant
provisions of the applicable European directives. The Declaration of Conformity (DoC) is
available at www.safescan.com
If possible, bring the machine to a recycling centre after usage. Do not throw away the
product with the household waste.

www.safescan.com
12-001