Sagem freesat+ recorder User manual

In case you need
to contact us
At Sagem we believe that a high quality product should come with
the highest quality customer service.
In the design of this product we have taken great care to ensure
the maximum quality possible and are sure that you will be
delighted with your purchase.
However, in the rare event that you have any problems with the
product and need advice or support you can be confident that we
will do our best to help you.
Our dedicated technical helpdesk can be contacted from
09:00 – 17:00, Monday to Friday and will offer expert guidance
on your product.
In the event of any trouble, please do not hesitate to call Sagem on:
08450 900 316
easy InstallatIon
of your sagem
freesat+ recorder
Bringing you easy HD
253257179

3. Setting up freesat+
Step 1 – Switch on your TV
Step 2 – Switch on the Sagem box by pressing
the on/button
Step 3 – An initial installation screen will
appear Press to start the installation
Step 4 – The recorder will search for the
satellite signal
Step 5 – Enter the full postcode (without any
spaces) using the alphanumeric keys on the
remote control for example to enter the letter
S, press the keypad number 7 four times
Use the key to delete and correct
characters
Press to continue
Step 6 – Follow the onscreen instructions
to personalise the box to your needs
Preferred Audio: Select your audio language
TV screen size: 16:9 or 4:3
HDMI Resolution: 1080i, 576p or 720p
Parental code: Set a parental control code
of your choice (default code is 0000)
Step 7 – The box will automatically start
searching for channels
1. Connecting the box
to the TV and the
Satellite Dish
Step 1 – Plug the satellite dish cables into the
SAT input connectors on the back of the box
Please note: To be able to watch a channel
and record another one at the same time,
you have to plug 2 SAT dish cables into the 2
SAT input connectors . Please speak to your
installer for further information
Step 2 – Plug the scart or HDMI cable into
the back of your box
Step 3 – Connect the scart or HDMI cable
into the back of your television
Step 4 – Connect the power cable into the
12V connector on the receiver and then plug
into the wall socket
2. Connecting to your Home
Cinema Equipment
Step 1 – Your Sagem freesat recorder can be
connected to your home cinema system. Use
the audio connections at the rear to connect
1Step 1
2Step 1
1Step 2-3
1Step 4
3Step 2
On
3Step 5
3Step 6
Your box is now set up to start enjoying freesat+

In case you need
to contact us
At Sagem we believe that a high quality product should come with
the highest quality customer service.
In the design of this product we have taken great care to ensure
the maximum quality possible and are sure that you will be
delighted with your purchase.
However, in the rare event that you have any problems with the
product and need advice or support you can be confident that we
will do our best to help you.
Our dedicated technical helpdesk can be contacted from
09:00 – 17:00, Monday to Friday and will offer expert guidance
on your product.
In the event of any trouble, please do not hesitate to call Sagem on:
08450 900 316
easy InstallatIon
of your sagem
freesat+ recorder
Bringing you easy HD
253257179