Sakamoto Model M175-1 User manual

●Introduction/Table of Contents １
●Purpose/ Content ２
●Precautions concerning handling ３
●Usage /Storage method ４
User’s Manual (151218)
M175-1 Transparent Suction Model
－ＩＮＤＥＸ－
Please open your parcel and check the main unit
and accessories of the product immediately
upon receipt. If the products are delivered
damaged or with parts missing, please contact
our company or the distributor.
！
Note

- 1 -
Introduction
Thank you for purchasing our product, “Transparent Suction Model.”
Read this user’s manual carefully in order to use the product for a long
time appropriately.
This product is closely checked before factory shipment. However, when
this product arrives, open it soon, and check if anything on the main unit
and accessories are missing or broken.
Table of contents
Introduction／Table of Contents………………………. 1
Purpose／Content………………………………………… 2
Precautions concerning handling………………………. 3
Usage／Storage method………….………………………. 4

- 2 -
Purpose
The following suctioning can be confirmed:
1. Oral and nasal suctioning
2. Suctioning through the endotracheal tube
3. Suctioning through the tracheostomy tube
Content
1. Main unit
2. Suction tube with LED light (in a dedicated case)
3. Silicone oil
4. 2 batteries (AAA alkaline batteries)
1
2
3
4

- 3 -
Precaution concerning handling
1. Avoid prolonged contact with resin products or solvents, as it may cause distortion
of the head part of the product.
2. Due to the nature of the material, the head part is likely to get dirty easily. It is
recommended to use rubber gloves (powder-free latex gloves to prevent adhesion
of powders to transparent parts of the product).
Note that stains of a ballpoint pen or marker on the product cannot be removed.
3. Adhesion of powders may reduce the transparent nature of the product.
4. Avoid wetting or soaking the suction catheter with LED light, as it may cause
damage.
5. Avoid unnecessary bending of the catheter part of the suction catheter with LED
light, as it may cause disconnection of the catheter.
6. Dedicated silicone oil must be applied before inserting the suction catheter with
LED light. Use only the dedicated silicone oil as a lubricant. (The use of other
substances may cause damage to the product.)
7. Light dirt can be removed with neutral detergent. (Do not use solvents, such as
thinner, because they melt the resin parts.)
8. If you notice any defect in the product, discontinue use immediately and
contact our company or the distributor.
9. This product was designed to simulate advanced medical training.
However, this does not guarantee similar results in actual treatment.
10. The specifications of this product may be upgraded without prior notice

- 4 -
Usage
1. Take the main unit out of the hard case, and place it on a non-slip desk surface.
2. Remove the blue cover to the suction catheter (with LED), open the battery
compartment in the back of the simulator and insert the batteries.
Use the two AAA size alkaline batteries. Make sure that the positive and negative
sides on the batteries are inserted correctly.
Replace the batteries with new ones when the indicator light fades.
3. Apply silicone oil when using the suction catheter with LED light.
Storage method
1. Avoid storing the product in direct sunlight or in locations with a high temperature
or humidity, as it may cause deformation or property change.
2. Remove the batteries when storing the product.
Leaving the batteries inside the product for a long period of time can result in
corrosion, and cause a break in the electric current.
3. Avoid excessive bending of the suction catheter with LED light when storing in the
dedicated case.