Salda PTOUCH PRGPU081 User manual

Ragainės g. 100, LT-78109 Šiauliai, Lithuania
Tel. [phone]
Fax. [phone]
o[email protected]
www.salda.lt
•Remotecontrolpanel
Ptouch
Usermanual
Art.-no. PRGPU081
PRV
PRV_P0099_AZ_0001

1GENERALINFORMATION...................................................................................................... 3
2USERMANUAL.......................................................................................................................... 3
2.1 Main window ..................................................................................................................... 3
2.2 Temperature setting window ...................................................................................... 4
2.3 Fan speed setting window ........................................................................................... 5
2.4 Lock screen ........................................................................................................................ 6
2.5 Menu window ................................................................................................................... 6
2.6 Device status window .................................................................................................... 8
2.7 Night cooling ..................................................................................................................... 9
2.8 Fans boost ........................................................................................................................ 10
2.9 Date and time ..................................................................................................................11
2.10 Weekly Schedule ......................................................................................................... 12
2.11 Filter timer ......................................................................................................................13
2.12 Alarms ............................................................................................................................. 13
2.13 Settings menu .............................................................................................................. 14
2.13.1 Language selection ..........................................................................................15
2.13.2 Theme selection .................................................................................................15
2.13.3 Child protection lock settings .......................................................................16
2.13.4 Screen brightness and dimming settings ............................................... 17
2.13.5 Sound settings ....................................................................................................18
TABLE OF
CONTENTS

3
GENERAL INFORMATION
1
Ptouchremotecontrolpanelisdesignedfor:
• SALDA ventilation units and other devices based on PRV, MCB or ECO controllers;
• Modbus-controlled devices.
Remote control panels guarantee optimal comfort of operation, monitoring, maintenance and service. All
operations can be performed using remote panel, which displays the status of the system, fault reports
and service settings.
Features:
• Simple use;
• Surface mounted;
• 4.3 touch-screen;
• Display of functions and set points;
• Acoustic response to touch;
• Maximum fan speed setting for limited time period (BOOST);
• Blocking (locking) - protection from children;
• User menu for fan speed, mode, status, CO2 control settings.
Packageincludes:
• 1x Ptouch control panel;
• 1x Cable;
• 1x Manual;
• 2x Fastening elements (screw 3,9 x 25 DIN 7981 – 2 pcs nylon plug 5x25 – 2 pcs, hammered steel plug
12x30 – 2 pcs).
USER MANUAL 2
2.1Mainwindow
EN
B1
I4
I3
B5
I2
B3
B4
B2
I1

4
Number Function
Displays the date and time
Displays the outdoor air temperature
Dislpays the extract (room) temperature
Displays the extract air humidity
Number Function
Click to open the menu window
Click to open the temperature setting window
Click to open the fan speed setting window
Click to open the previous indicators
Click to open the next indicators
I1
B1
I2
B2
I3
B3
I4
B4
B5
2
EN
B1
I3
B3
I2
I1
B2
Number Function
Displays the window name
Displays the date and time
Displays the temperature setting
Number Function
Click to return to the main window
Click to increase/decrease the temperature
I1
B1
I2
B2
I3
B3
2.2Temperaturesettingwindow

5
2
B1
B4
B5
I1
B2
B3
EN
2.3Fanspeedsettingwindow
Number Function
Active fan speed mode
Number Function
Click to activate the“Stand-by”mode (if other settings allow this)
Click to turn on the fan speed 1
Click to turn on the fan speed 2
Click to turn on the fan speed 3
Click to turn on/o the “BOOST” function
I1
B1
B2
B3
B4
B5

6
2.4Lockscreen
Number Function
Active fan speed mode
Dislpays the extract (room) temperature
Displays the extract air humidity
Displays the outdoor air temperature
I1
I2
I3
I4
B4
B8
I2
B3
B7
B5
B6
B9
B2
I3
2.5Menuwindow
I1 I4
B10
2
EN

7
Number Function
Click to open the previous row
Click to open the next row
Click to open the status monitoring window
Click to open the night-time cooling function settings window
Click to open the fans boost function settings window
Click to open the date and time settings window
Click to open the weekly schedule setting window
Click to open the lter timer settings window
Click to open the alarms window
Click to open the service menu
Click to open the settings window
B1
B4
B2
B5
B3
B6
B7
B1
B11
B8
B9
B10
B11
2
EN

8
I1
I9
I2
I10
I6
I14
I5
I13
Number Function
Supply air temperature
Exhaust air temperature
Extract (room) air temperature
Outdoor air temperature
Fan speed setting
The state of the BOOST function
Supply fan speed
I1
I2
I4
I12
I3
I11
I7
I15
I8
I16
2.6Devicestatuswindow
I5
I6
I3
I7
I4
2
EN

9
I8
I9
I10
B2
I1
B1
Number Function
Click to turn on/o the night-time cooling function (now it is turned on)
I1
F1
F2
B3
Extract fan speed
The state of the fan power circuit (turned on/o)
Extract air humidity
Set Point system temperature
The state of the stand-by function
Active system mode
Air damper state
The state of the heater power circuit (turned on/o)
Pre-heater state
I11
I12
I13
I14
I15
I16
2.7Nightcooling
Number Function
Displays the maximum allowable outdoor air temperature setting
Displays the maximum allowable outdoor air temperature setting
Displays the room air temperature setting
Displays the air change interval setting in hours
F1
F2
F3
F4
F4
F3
2
EN

10
Number Function
Function on/o switch
Buttons to increase value
Buttons to decrease value
B1
B2
B3
B1
B2
Number Function
Click to increase/decrease the „BOOST” function time
B1 B2
Number Function
Displays the setting of the BOOST function time in minutes
F1
F1
2.8Fansboost
2
EN

11
B1
Number Function
Buttons to increase value
Buttons to decrease value
B1
B2
Number Function
Displays the year
Displays the month
Displays the day
Displays hours (24h format)
Displays minutes
F1
F4
F2
F5
F3
F1 F5
F2
B2
F4
F3
2.9Dateandtime 2
EN

12
2.10Weeklyscheduler
Number Function
On/o indicator for selected event (green strip – event is on)
Active weekdays (green strips); inactive weekdays (gray strips)
Event time (24h format)
New fan speed which will be set as current on occurrence of selected
event
New set point which will be set as current on occurrence of selected
event
Marker showing the event (or weekday) which is being modied
I1
I5
I2
I6
I3
I4
Number Function
Event selection and on/o switch
Buttons to select active weekdays for selected event
Dials to set event hour and minute
Button to switch the event state between active and inactive
B1
B2
B3
B4
2
EN
B4
B3
B3
I6
I1
B1
B2
I2
I4
I3
I5

13
EN
B1
I1
Number Function
Click to reset the lter timer. Use only after lter replacement and
at Your own risk
B1
Number Function
Working hours remaining till lter service
I1
I1
B1
2.11Filtertimer
2.12Alarms
2

14
Number Function
Reset alarms
B1
Number Function
List of current active alarms
I1
NOTE: All active alarms are also shown on a main window.
B2
B1
B5
B3
B4
2.13Settingsmenu
2
EN
Number Function
User interface language selection
User interface theme selection
Child protection lock settings
Screen brightness and dimming settings
Sound settings
B1
B2
B3
B4
B5

15
EN
2
B1
B1
2.13.1Languageselection
2.13.2Themeselection
Number Function
Buttons to select the language for user interface
Number Function
Buttons to select the theme for user interface
B1
B1

16
2
EN
Number Function
Current setting indication
I1
Number Function
Lock delay. Inactivity time to trigger the lock screen
Range: [OFF or 10-1200 s]
Unlock PIN code. Digit 1
Range: [0-9]
Unlock PIN code. Digit 2
Range: [0-9]
Unlock PIN code. Digit 3
Range: [0-9]
Unlock PIN code. Digit 4
Range: [0-9]
F1
F4
F2
F5
F3
F1 F5
I1
F2 F4
F3
2.13.3Childprotectionlocksettings

17
EN
2
Number Function
Current setting indication
I1
Number Function
Screen brightness for normal active mode
Range: [70-100 %]
Dimming level for dimmed mode
Range: [30-70 %]
Inactivity time to trigger dimmed mode
Range: [30-300 s]
Turn o the screen function
ON: screen is turned o after specied inactivity time
OFF: screen is never turned o
Inactivity time to turn o the screen
Range: [30-2000 s]
F1
F4
F2
F5
F3
2.13.4Screenbrightnessanddimmingsettings
F1 F5
F2 F4
F3
I1

18
2
EN
Number Function
Current setting indication
I1
Number Function
Click tone switch:
ON: Each button press is indicated by a short beep;
OFF: No beeps.
F1
F1
2.13.5Soundsettings
I1