Salto XS4 Mini User manual

1/4 224930 - ED.1 - 02/10/2023
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its
design, construction, and/or materials.
For Australian mortise locks with door holes (41 mm) for handle fastening
Installation guide XS4Mini
SALTO recomienda utilizar cerraduras con un pregiro maximo de 4º.
t
Outside
Inside
Mortise Lock not included
Cerradura de embutir no incluida
Exterior
Außenseite
Extérieur
Esterno
Interior
Innenseite
Intérieur
Interno
Eng
E
Installation guide
Guía de instalación
22.5 58.5
77
127
Eng
E
SALTO recomends the use of a mortise lock, with a maximum 4º pre-turn
O 20 MIN.
50
41
Eng
E
L
R
1
23
4
56
TORX20
3 mm
SELECT HANDING SELECCIONE MANO
Eng
E
4°
Max.
t > 80
FOR "Z" HANDLE SEE PAGE 4
CON MANILLA "Z" VER PAGINA 4
U i 1 50xx.. series
U i 3 50xx.. series
41
M4
61.5
50 78
128
23.5
M4 41
MODELS: ELECTRONIC INFO: E10M - ME0J - E30M

2/4 224930 - ED.1 - 02/10/2023
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its
design, construction, and/or materials.
For Australian mortise locks with door holes (41 mm) for handle fastening
Installation guide XS4Mini
For Door thickness from 50 to 90mm (t=REF.9 ,REF. 1). Prepare spindles as follows (Rebated doors allowed):
OUTSIDE INSIDE
Co Ci
OUTSIDE SPINDLE REF. 9 REF. 1
1.-Measure from the outside door face
to mortise lock case (Co)
2.- Cut Outside Spindle*
-> Lo= Co+5.5mm
INSIDE SPINDLE REF. 1
1.-Measure from the inside door face
to mortise lock case (Ci)
2.- Cut Inside Spindle
-> Li= Ci+35mm
Lo
Cut fromhere
Li
Cut fromhere
50<P<90mm
*NOTE: This cut for the Outside Spindle must be
done with accuraccy of ±1mm
SP01840-xSP01840-x
->Lo= Co+7mm
WITH COVER PLATE ->
SPLIT SPINDLE 7.6 KIT
Split Spindle depending Spindle´s "Fo" Mesure
SPLIT SPINDLE 7.6 KIT
P
Co Fi
Fo
F
Necessary to cut to mesure
F
Spindle
Projection
Fo
Needed Spindle
Length
Co t
REF.
Split Spindle
7.6 Kit
Fi
Inside Spindle
P
Door Thickness
(Orientative)
14.5 mm 15-17.5 mm 9-11.5 2 SP01840-2
17 mm 17.5-20 mm 11.5 - 14 mm A SP01840-A
19.5 mm 20-22.5 mm 14 - 16.5 mm B SP01840-B
22 mm 22.5-25 mm 16.5 - 19 mm 5 SP01840-5
9 SP01841-9 53 mm
47 - 70 mm
1 SP01841-1 70-105 mm
67 - 90 mm
32 - 50 mm
53mm
16 - 58.5 mm 16.5 - 59 mm 10.5 - 54.5 mm
>80mm
MIN. 25 mm
OUTSIDE INSIDE
For door thickness(t)

3/4 224930 - ED.1 - 02/10/2023
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its
design, construction, and/or materials.
For Australian mortise locks with door holes (41 mm) for handle fastening
Installation guide XS4Mini
A
AT THIS POINT DO NOT
CLOSE THE DOOR
PROGRAM THE LOCK FIRST
Follow user manual
NO CIERRE LA PUERTA.
PROGRAME LA CERRADURA
E
Eng
Consulte el manual del usuario
NOT OK
* O 8 mm.
*ø8 *ø9
=
=
+
++
click!
41
Installation Instalación
Eng
E
TORX 20
MIN. O 20 mm.
LR03
AAA
TORX10
FOR " Z" HANDLE SEE PAGE 4
CON MANILLA "Z" VER PAGINA 4
B
C
D
E
F
G
H

4/4 224930 - ED.1 - 02/10/2023
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its
design, construction, and/or materials.
For Australian mortise locks with door holes (41 mm) for handle fastening
Installation guide XS4Mini
+
++
34
Battery change Sustitución de las pilas
E
Eng
DETAILS FOR INSTALLATION WITH "Z" HANDLE DETALLES PARA UNA INSTALACIÓN CON MANILLA "Z"
SELECT HANDING SELECCIONE MANO
Eng
E
LR
12
3
45
TORX20
3 mm
G
F
E
AT THIS POINT DO NOT
CLOSE THE DOOR
PROGRAM THE LOCK FIRST
Follow user manual
NO CIERRE LA PUERTA.
PROGRAME LA CERRADURA
E
Eng
Consulte el manual del usuario
NOT OK
=
=
+
++
click!
LR03
AAA
TORX10
+
++
34
Battery change with "Z" handle Sustitución de las pilas con manilla "Z"
EEng
Installation with "Z" handle Instalación con manilla "Z"
Eng
E
12
TORX10
TORX10
12