201155-ED. 23/11/2012 All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
itemin this catalog, its design, construction, and/or materials.
Installation guide Ei45x...
1/4
E i 450 m 00 ff t x h r series
E i 451 m dd ff t x h r
E i 452 m dd ff t x h r
E i 453 m dd ff t x h r
E i 454 m dd ff t x h r
E i 456 m 00 ff t x h r
E i 457 m dd ff t x h r
E i 460 m 00 ff t x h r
E i 4P0 m 00 ff t x h r
E i 461 m dd ff t x h r
E i 4P1 m dd ff t x h r
E i 466 m 00 ff t x h r
E i 4P6 m dd ff t x h r
E i 4K0 m 00 ff t x h r
E i 4K2 m 72 ff t x h r
E i 4K4 m 72 ff t x h r
t*
145 [5-3/4"]
O14
O25
1
2
33a 4
6
2a
8
9
10
11
Outside
Inside
ONLY FOR PROXIMITY MODELS
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection a
ainst harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency ener
y and, if not installed and used in accordance with
the instructions may cause harmful interference to radio communications. However, there is no
uarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turnin
the equipment off and on, the user is encoura
ed to try to correct the interference by one or
more of the followin
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
105 [4-1/8"]
[O9/16"]
[O1"]
Declaración de conformidad
Por medio de la presente SaltoSystemsS.L.(Pol. Lanbarren C/Arkotz,9-
20180 Oiartzun – Spain - CIF B20708517), declara que este equipo cumple
con los requisitos esenciales y cualesquiera otras disposiciones
aplicables o e
igibles de la Directiva 1999/5/CE o la Directiva
89/336/EEC. Podrá encontrar una copia de la declaración de
conformidad ori
inal en la si
uiente dirección de Internet:
http://www.saltosystems.com
Todos los modelos de proximidad son “Receiver class 3”.
Declaration of conformity
By means of the present Salto Systems S.L.
Pol. Lanbarren C/Arkotz, 9 -
20180 Oiartzun - Spain - CIF B20708517), declares that this equipment
fulfills the essential requirements and any other applicable or
indispensable dispositions of the Directive 1999/5/CE or the Directive
89/336/EEC. You will be able to find a copy of the ori
inal declaration
of conformity at the followin
Internet address:
http://www.saltosystems.com
All proximity models are "Receiver class 3".
E
Eng
*
7
* Required only for
doors that exceed
60mm [2-3/8"] thickness
Mortise Lock not
included
follow user manual
AT THIS POINT DO NOT
CLOSE THE DOOR
PROGRAM THE LOCK FIRST
Cerradura de embutir no
incluida
ExteriorInterior
* Sólo para puertas de
espesor mayor de 60mm
[2-3/8"]
EN ESTE PUNTO NO CIERRE LA PUERTA,
PROGRAME PRIMERO LA CERRADURA
Consulte el manual del
usuario
I
Eng
F
D
EInstallation guide
Guía de instalación
Montageanleitung
Guide d'installation
Guida all'installazione
Eng
E
Eng
E
5
4°
max.
SALTO recomends the use of a mortise lock,
with a maximum 4º pre-turn
SALTO no garantiza el correcto funcionamiento del
ensamblaje, si se utilizan cerraduras con pregiro
superior a 4º
