Salus HTRS230 User guide

INSTALLER MANUAL
Wired Digital Thermostat
Model: HTRP230

Contents of the box Product Compliance and Safety Info
Manual Contents:
Box Contents
Introduction
Product Compliance and
Safety Information
Installation
User Interface
Status/LED indication
Installers notes
Warranty
Icons used in this manual:
Safety
Important info
Your benefit
Fixing Screws 1 x Installer Manual
INSTALLER MANUAL
Wired Digital Thermostat
Model: HTRP230
HRTP230 Thermostat
Product Compliance
SALUS Controls hereby declares that the product complies with the essential
requirements of the following EC Directives: 2014/30/EU, 2014/35/EU and 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following internet
address: www.saluslegal.com.
Safety Information
Use in compliance with safety regulations. The unit is to be used for the control of
room temperature inside the house.
Installation
This accessory must be fitted by a competent person, and installation must comply
with the guidance, standards and regulations applicable to the city, country or state
where the product is installed. Failure to comply with the relevant standards could
lead to prosecution.
2 HTRP230 Instruction Manual

Product Compliance and Safety Info
Product Compliance
SALUS Controls hereby declares that the product complies with the essential
requirements of the following EC Directives: 2014/30/EU, 2014/35/EU and 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following internet
address: www.saluslegal.com.
Safety Information
Use in compliance with safety regulations. The unit is to be used for the control of
room temperature inside the house.
Installation
This accessory must be fitted by a competent person, and installation must comply
with the guidance, standards and regulations applicable to the city, country or state
where the product is installed. Failure to comply with the relevant standards could
lead to prosecution.
HTRP230 Instruction Manual 3

Product Description 1. Mounting the Thermostat
Installing the unit
Thank you for purchasing the Salus HTRP230 Thermostat. This thermostat is a device
that lets you customize the heating and cooling of your home as needed.
The HTRP230 device from Salus Controls is a stylish and accurate digital room
thermostat that is fitted with a large easy to read LCD screen and one touch buttons.
You can now simply adjust your home temperature as desired in order to create a
comfortable home environment.
We hope you enjoy our product.
Install the HTRP230 digital room thermostat roughly about 1.5m above floor level. It
should be mounted in a location where the thermostat is easily accessible and away
from direct sunlight. You can mount the thermostat directly on the wall or you can
install it on top of a wall-box.
Gently remove front housing.
4 HTRP230 Instruction Manual

1. Mounting the Thermostat
Thank you for purchasing the Salus HTRP230 Thermostat. This thermostat is a device
that lets you customize the heating and cooling of your home as needed.
The HTRP230 device from Salus Controls is a stylish and accurate digital room
thermostat that is fitted with a large easy to read LCD screen and one touch buttons.
You can now simply adjust your home temperature as desired in order to create a
comfortable home environment.
We hope you enjoy our product.
Install the HTRP230 digital room thermostat roughly about 1.5m above floor level. It
should be mounted in a location where the thermostat is easily accessible and away
from direct sunlight. You can mount the thermostat directly on the wall or you can
install it on top of a wall-box.
Gently remove front housing.
Without floor sensor With floor sensor
HTRP230 Instruction Manual 5

2. Terminal Connection
N
N
L
CO
L
N
S1 ACTUATOR
OPTIONAL
EXTERNAL
PROBE
E.G.
HEAT
PUMP
OUTPUT
TO MULTIPLE
DEVICES
NSB
OUTPUT
230VAC
50Hz
N
CO
L
N
S1
Note: You can wire the thermostat directly to
the KL08NSB wiring centre or to an actuator
(purchased separatly).
6 HTRP230 Instruction Manual

3. Thermostat Icons
N
CO
L
N
S1
BOX means to select mode.
e.g. means Hi temp is selected
means the Hi temp is not selected.
Sunny: Hi comfortable temperature
Moon: Low comfortable temperature
Indicates AUTO ON or AUTO OFF
Frost Protection Indicator:
Frost protection is active, not available in cooling mode.
Indicates that the Party Mode is active
Indicates that the Holiday Mode is ON.
Heat Mode indicator: Indicates heating is running
HTRP230 Instruction Manual 7

4. Thermostat Icons Continued 5. Button Functions
Programs number indicator.
Indicates the time.
Indicates the the day of the week
Temporary override indicator:
The hand will appear until the next programs starting
Cool Mode indicator:
The icon is flashing when cooling mode is active
Temperature indicator
• Display the room temperature
• Display the set temp
8 HTRP230 Instruction Manual

5. Button Functions
Mode selection.
Long press to return home without saving.
OK key. Short press to confirm selection.
Long press to save and return home.
Long press to enter Temperature offset Heat/Cool.
Decrease or increase Setpoint Temperature.
OR
Note: LCD backlight is activated by pressing any key.
HTRP230 Instruction Manual 9

6. Setting Date and Time 6. Setting Date and Time
When you first power up your device you
will have to set up the date and time.
Press to
confirm.
Press or to
choose 12/24 hr
then press
to confirm.
3
1 2
4
10 HTRP230 Instruction Manual