Sami Wearable DUO TALK User manual

Thank you for purchasing the
the instructions carefully to obtain optimum results and
preserve it for future reference.
devices since 2015 and we use the best components possible
for the product.
DESCRIPTION OF THE WEARABLE
This device is a smart watch that supports Bluetooth talking
phone calls
CONTENTS
Wearable
USB charging cable
WEARABLE
User Manual
WS-2355
Thank you for purchasing the
Sami Wearable
the instructions carefully to obtain optimum results and
preserve it for future reference.
Samihas developed wearable
devices since 2015 and we use the best components possible
DESCRIPTION OF THE WEARABLE
This device is a smart watch that supports Bluetooth talking
USB charging cable
instruction manual.
WS-2355. Read
the instructions carefully to obtain optimum results and
Samihas developed wearable
devices since 2015 and we use the best components possible
This device is a smart watch that supports Bluetooth talking
instruction manual.

CHARGING
Connect the device to a computer or laptop with the
charging
cable for charging
of the charger with
the charging
of your device.
Kindly use only the USB cable included with
the wearable. If you use a power adapter for charging the
output of the power adapter should be 5V 1A. Charging time:
2-3
hours. Please charge the device fully before using it.
sure you put the case of th
direction.
HOW TO POWER ON POWER OFF?
1)
To turn ON the smart band long press the Power On/Off
button for a
few seconds.
situated on the right side of the device.
2)
To turn OFF the smart band long press the Power On/Off
button for a
few seconds
interface select “Yes” to power off your device.
HOW TO CONTROL?
1)
On the display screen(touchscreen) short tap the
touchscre
en to select
change between the different menu pages.
Connect the device to a computer or laptop with the
cable for charging
.Put in contact
the charging
the charging
points
positioned in the back
Kindly use only the USB cable included with
the wearable. If you use a power adapter for charging the
output of the power adapter should be 5V 1A. Charging time:
hours. Please charge the device fully before using it.
sure you put the case of th
e charger cable in the right
HOW TO POWER ON POWER OFF?
To turn ON the smart band long press the Power On/Off
few seconds.
The power ON/OFF button is
situated on the right side of the device.
To turn OFF the smart band long press the Power On/Off
few seconds
to enter in the power off
interface select “Yes” to power off your device.
On the display screen(touchscreen) short tap the
en to select
; tap and
slide left/right/up/down to
change between the different menu pages.
Connect the device to a computer or laptop with the
USB
the charging
case
positioned in the back
Kindly use only the USB cable included with
the wearable. If you use a power adapter for charging the
output of the power adapter should be 5V 1A. Charging time:
hours. Please charge the device fully before using it.
Make
e charger cable in the right
To turn ON the smart band long press the Power On/Off
The power ON/OFF button is
To turn OFF the smart band long press the Power On/Off
to enter in the power off
interface select “Yes” to power off your device.
On the display screen(touchscreen) short tap the
slide left/right/up/down to
change between the different menu pages.
Long press in

the main screen of your device to select between
thedifferent digital watches. Slide and select in the one that
you desire to set.
2)Slide from the top side to the bottom to enter in the shortcut
menu.
3)Slide from the right side to the left side to display the
different functions or submenus.
4)Short press the Power On/Off button to return. Long press
the Power On/Off Button to make it Power On/Off.
5)If you are in a submenu slide from the left side to the right
side to go back.
6)Short tap in the screen to light it on.
GETTING STARTED:
- For Android
1) How to obtain the BT Connection APK (V BAND)
Search for the V BANDin the Google Play Store; download it
and install it in your Android smartphone or go to our website
www.sami.es anddownload the application.
2) Installation of the V BANDAPK.
When installing the V BANDapplication on your Android you
must allow all the Application Permissions allow this V
BANDapp auto run.
The first time you run this V BAND it will ask you to Enable
Notifications please tap OK and tap the V BANDand confirm
OK. You must tap OK/Allow/Pair/Yes/Confirm for any pop-up
request. On your Android permission management allow all
application permissions.
3) How to make the wearable pair with your Android smart
phone?
*First turn on the Bluetooth of your smart watch: in the home
screen of the smart watch slide from top to bottom to enter in
the shortcut menu  tap the Bluetooth music icon to turn
it on.

* Second turn on the Bluetooth of your Phone.
*Third run the V BANDapp on your Phone on the home page
of V BAND select the “Device” icon which is on the bottom
centre of the interface tap +Add Device and then the APP
will search for Bluetooth device(s) when the available
Bluetooth device displays please selectT10orWS-2355 (the BT
name of this device) to make it pair. The pairing will be
finished in few seconds. When you finish select
OK/Confirm/Allow/Pair for any pop-up request.
*Fourth at your Android smartphone’s settings  Bluetooth
select T10 AUDIO or WS-2355 AUDIO(the BT name of this
device) to make it pair.
Note: This device builds in dual Bluetooth connectivity. If this
step is not finished the smart watch will not receive phone
calls and the music player will not work. In your Bluetooth
smart phone settings interface should be displayed both
T10orWS-2355 and T10 AUDIO andWS-2355 AUDIO
CONNECTED.
* Now you can start using your desired functions of the smart
watch.
Important: To enable all notifications of different software’s
such as WhatsApp Facebook Skype Twitter you may need
to turn on the notifications on the APP manually. On the home
page of V BAND select the “DEVICE”icon situated in the
bottom centreof the screen  and select “Message
Reminder”  select “Open all” to turn on all the notifications
available or turn on one by one the APP notifications you
want to active.
NOTE: For Android smart phone in order to achieve all of the
functions which are supported by the V BANDapp you must
allow the V BANDapp runs in background you must tap
OK/Confirm/Allow/Yes for any of the pop-up request at the 1st
time of running of the V BAND APK/APP. And it may ask you to

turn on the V BANDapp in the Android smart phone’s
Accessibility: go to the settings of the
smartphoneAccessibility find the V BANDapp and turn it
on.
- For iPhone
1) How to obtain the BT Connection APP? (V BAND)
On iPhone please go to APP Store and search V BANDand
install the app. When installing the V BANDapplication on your
iPhone you must tap OK/Allow/Pair/Yes/Confirm for any
pop-up requests and allow the Background App Refresh.
2) How to make the wearable pair with your iPhone?
*First turn on the Bluetooth of your smart watch: in the home
screen of the smart watch slide from top to bottom to enter in
the shortcut menu  tap the Bluetooth music icon to turn
it on.
*Second turn on the Bluetooth of your iPhone.
*Third run the V BANDapp on your iPhone on the home page
of V BAND select the“Device” icon which is on the bottom
centre of the interface tap +Add Deviceand then the APP
will search for Bluetooth device(s) when the available
Bluetooth device displays please tap T10orWS-2355 (the BT
name of this device) to make it pair. The pairing will be
finished in few seconds. When you finish select
OK/Confirm/Allow/Pair for any pop-up request.
*Fourth at your iPhone’s settings Bluetooth select T10
AUDIO or WS-2355 AUDIO (the BT name of this device) to
make it pair.
Note: This device builds in dual Bluetooth connectivity. If this
step is not finished the smart watch will not receive phone
calls and the music player will not work. In your Bluetooth
smart phone settings interface should be displayed both
T10orWS-2355 and T10 AUDIO or WS-2355 AUDIO CONNECTED.
* Now you can start using your desired functions of the smart
watch.

Important: To enable all notifications of different software’s
such as WhatsApp Facebook Skype Twitter you may need
to turn on the notifications on the APP manually. On the home
page of V BAND select the “DEVICE”icon situated in the
bottom centre of the screen  and select “Message
Reminder”  select “Open all” to turn on all the notifications
available or turn on one by one the APP notifications you
want to active.
DISCONNECTING (UNPAIRING) YOUR SMARTWATCH
On the homepage of V Band select the “Device” icon which
is situated in the bottom centre of the interface  tap “Unpair”
and confirm to make it unpair at the Settings of your smart
phone enter in the Bluetooth settings tap on the forget
option of both “T10 or WS-2355” and “T10 Talk or WS-2355
Talk”. Now the Bluetooth pairing between the smart watch
and your smart phone is disconnected completely.
PRODUCT FEATURES
BLUETOOTH (V 5.0)
FULL TOUCH SCREEN. Capacitive touch screen 1.65"
BUILT IN SPEAKER
BUILT IN MICROPHONE
BUILT IN VIBRATING MOTOR
BUILD IN HEART RATE SENSOR
BUILD IN GRAVITY SENSOR
GESTURE CONTROL TO LIGHT UP THE DISPLAY SCREEN
BLUETOOTH TALKING PHONE CALL
MESSAGE NOTIFICATIONS
BLUETOOTH MUSIC PLAYER
DUAL BLUETOOTH CONNECTIVITY

DISPLAY SCREEN INTERFACE
1)Clock screens (Home Screen) - 6 different home digital
clocks; in the main screen long press for a few seconds to
change them
2)Shortcut Menu- Tap and slide from top to buttom to
enterin the quick menu this menu includes the
functiones of Gesture control to light up the screen
Brightness Adjustment do not disturb mode battery Status
Bluetooth Broadcasting (Bluetooth Music connetivity)
Weather QR Code to download the V BAND and System
Info.
3)Message notification-in your smartwatch slide from bottom
to top to enter in the Messages menu.
4)Pedometer (steps calories distance) - Tap and slide the
home screen from left to right to display the
Pedometer(Steps Distance Calories) menu
5)Sleep monitor- Tap and slide the home screen from left to
right one more time to display the sleep menu
Tap and slide the home screen from right to left to enter in the
menu of various functions as following:
6)Heart Rate
7)Blood Pressure
8)Blood Oxygen(SPO2)
9)Sports – Walking Running Riding Climbing Yoga Elliptical
trainer
10) Music Player
11) Messages – sync all push messages from your smart
phone.
12) Weather
13) Find Phone
14) Dialer
15) Call Records
16) Contacts – set it manually at theV BAND app. In home

interface of V Band tap Device tap Other Setting tap
Sync Contacts select the contact(s) and sync with the smart
watch.
17) Stopwatch
18) Languages – build in multiple languages and they can be
selected.
19) System – device system information
20) Reset – restore to factory default settings
21) Shutdown
Data can be sync from the wearableto the smart phone on
the V BAND APK/APP.
Your smart phone will synchronize when the Bluetooth is paired
with this device.
FUNCTIONS
BLUETOOTH PHONE CALL- You can make phone calls, which
are supported by the Bluetooth pairing. Youcan answer
incoming phone calls directly on the smart watch you can talk
and can dial BT phone calls.
MESSAGE NOTIFICATION - vibrating & ringing reminder for
incoming messages including SMS WhatsApp Facebook
Twitter Skype messages etc. You may need to turn it on at
APP.
Customized dial (Photo in screen) – use your own photo for
background set it at V BAND APP/APK. In the tap in the
“Device” icon Dial Select  Custom dial  Custom
background choose the photo you desire to set.
GPS MAP TRACE – in the home page of V Band tap the Sports
icon which is situated in the bottom left of the interface 
scroll down the interface to find the GPS Running icon tap it
and enter tap Start Train. The GPS map trace can be viewed
here.
GOAL SETTINGS – set goals for steps
ALARM CLOCK-set it at V BAND APP/APK

REMOTE CAMERA (remote shutter of your smart phone’s
camera)
OTHER SETTINGS – 12/24 hours find device do not disturb
sedentary reminder Drink reminder Heart Rate test settings
Gesture to light up screen(Wake up by lifting hands) sync
contacts recovery factory setting(this recovery setting will
disconnect Bluetooth connection and make the smart watch
restore to factory default settings).
FIRMWARE UPDATE
**** THIS IS NOT A MEDICAL INSTRUMENT, SO THE VALUES ARE
APPROXIMATE
CLEANING:
In order to avoid any damage on the plating or printing of
your wearable please do not use any chemical product for
cleaning such as alcohol 96º. We recommend you to use a
slightly wet cloth.
TECHNICAL SPECIFICATIONS:
Display screen: Capacitive FULL touch screen 1.65".
Screen resolution: 240x295 pixels.
Internal Memory: RAM 208KB ROM 8MB + 64MB
System:Nucleus
CPU: Irvinesemi IS2806+AB376A dual mode
Charge I O port : USB SEAT charging cable
Battery: Built in Li-Polymer 240 mAh
Stand by time: 10~15 days
Working time: 5-7 days
Bluetooth: v5.0
Water-resist Rating: IP67 (this device resists raindrops it’s not
water proof)
Weight: 42.7 g
Dimension of device: 32.5X41.5mmX11.5mm (exclude strap)

Declaration of Conformity
Hereby we,
Name of manufacturer:
SANTOSHI SL
Address:
CALLE FELIPE ASENJO N.56
Zip code & City: 28947 -
FUENLABRADA ( MADRID )
Country: SPAIN
declare that this DoC is issued under our sole responsibility and that this product:
Product description: Smart
Watch
Type designation(s): WS-
2355
Trademark:
SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU
Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU:
(RoHS) Restriction of Hazardous Substance.
with reference to the following standards applied:
EN 60950-
1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)
Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 18/ 12 / 2020
Declaration of Conformity
SANTOSHI SL
CALLE FELIPE ASENJO N.56
FUENLABRADA ( MADRID )
declare that this DoC is issued under our sole responsibility and that this product:
Watch
2355
SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
Standard CE (RED): DIRECTIVE 2014/53/EU
(RoHS) Restriction of Hazardous Substance.
with reference to the following standards applied:
1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
declare that this DoC is issued under our sole responsibility and that this product: