Sami Elegant WS-2349 User manual

WEARABLE
User Manual
WS-2349
Thank you for purchasing the Sami Wearable WS-2349. Read the
instructions carefully to obtain optimum results and preserve it
for future reference. Sami has developed wearable devices
since 2015 and we use the best components possible for the
product.
DESCRIPTION OF THE WEARABLE
CONTENTS
Wearable, USB magnetic charging cable, strap tool,
instruction manual.

CHARGING
Connect the device to a computer or laptop with the USB
magnetic charging cable for charging. Insert the charging
thimbles of the charger into the charging points positioned in
the back of your device. Kindly use only the USB cable
included with the wearable. If you use a power adapter for
charging, the output of the power adapter should be 5V, 1A.
Charging time: 2 hours. Please charge the device fully before
using it.
NOTE: Do not have the charger connected to AC and the
magnets touching any metallic surface, this will create a high
heating of the cable and will damage it.
HOW TO POWER ON / POWER OFF?
1)To turn ON the smart band, long press the Power On/Off
button for few seconds to make it Power On.
2)To turn OFF the smart band, long press the Power On/Off
button to make it Power Off; or on the touchscreen, tap
and slide from bottom to top until the system icon displays,
tap it to enter, scroll down and tap in the Power Off icon,
select Yes to make it Power Off.

HOW TO CONTROL?
1)On the display screen(touchscreen), short tap the
touchscreen to select; tap and slide left/right/up/down to
change between the different menu pages.
2)Short press the Power On/Off button to return. Long press the
Power On/Off Button to make it Power On/Off.
3)Short press the return button to go back.
GETTING STARTED:
- For Android
1) How to obtain the BT Connection APK (WEARFIT 2.0)
Search for the WEARFIT 2.0 APP in the Google Play Store;
download it and install it in your Android smartphone, or go to
our website www.sami.es and download the application.
2) Installation of the WEARFIT 2.0 APK.
When installing the WEARFIT 2.0 application on your Android,
you must allow all the Application Permissions, allow this
WEARFIT 2.0 app auto run.
The first time you run this WEARFIT 2.0, it will ask you to Enable
Notifications, please tap OK and tap the WEARFIT 2.0 and
confirm OK. You must tap OK/Allow/Pair/Yes/Confirm for any
pop-up request. On your Android permission management,
allow all application permissions.
3) How to make the wearable pair with your Android smart
phone?
*First, turn on the Bluetooth of your Phone.
*Second, run the WEARFIT 2.0 app on your Phone, on the home
page of WEARFIT 2.0, select “Third party log in” and select
the social network that appears to log in with this one in the
app. Or you can use an email address to register and to log
on.

Once you open the app select the “me” icon which is on the
right bottom of the interfacetap Connection Management
tap again Connect band, and then the APP will search for
Bluetooth device(s), when the available Bluetooth device
displays, please tap B3P or WS-2349 (the BT name of this device)
to make it pair. The pairing will be finished in few seconds.
When you finish select OK/Confirm/Allow for any pop-up
request.
* Now you can start using your desired functions of the smart
band.
Important: To enable all notifications of different software’s
such as WhatsAPP, Facebook, Skype, Twitter, you may need to
turn on the notifications on the APP manually. On the home
page of WEARFIT 2.0, select the “me” icon situated on the right
bottom of the screen, and select ‘’Device management’’,
‘’ Smart reminder’’, ‘’app notification’’ and turn on all the
APP notifications you want to active.
- For iPhone
1) How to obtain the BT Connection APP? (WEARFIT 2.0)
On iPhone, please go to APP Store and search WEARFIT 2.0 and
install the app.
2) How to make the wearable pair with your iPhone?
*First, turn on the Bluetooth of iPhone
* Run the WEARFIT 2.0 app on the iPhone, on the home page
of WEARFIT 2.0, select “Third party log in” and select the
social network that appears to log in with this one in the app.
Or you can use an email address to register and to log on.
Once you open the app tap the “MINE” icon which is on the
right bottom of the interface tap Connection Management
tap again ”Bind Bracelet”, and then the APP will search for
Bluetooth device(s), when the available Bluetooth device
displays, please tap B3P or WS-2349 (the BT name of this device)

to make it pair. The pairing will be finished in few seconds.
When you finish select OK/Confirm/Allow for any pop-up
request.
* Now you can start using your desired functions of the smart
band.
Important: To enable all notifications of different software’s
such as WhatsAPP, Facebook, Skype, Twitter, you may need to
turn on the notifications on the APP manually. On the home
page of WEARFIT 2.0, select the “MINE” icon situated on the
right bottom of the screen, and select ‘’Device
management’’, ‘’ Intelligent reminder’’, ‘’app
notification’’ and turn on all the APP notifications you want to
active.
ATENTION: In IOS and in Android your wearable should be
connected through the app and not with the Bluetooth menu
of your phone. If you have paired it on the Bluetooth menu,
unpair it and forget the device to start the correct binding
through the app.
PRODUCT FEATURES
BLUETOOTH (V 4.2)
FULL TOUCH SCREEN. Capacitive touch screen 1.28"
BUILT IN VIBRATING MOTOR
BUILD IN HEART RATE SENSOR
BUILD IN GRAVITY SENSOR
GESTURE CONTROL TO LIGHT UP THE DISPLAY SCREEN

DISPLAY SCREEN INTERFACE
1) Time/Date/ Battery /Steps/Heart rate
2) Clock Screens –six different home digital clocks; in the
main screen, long press the display screen to change it.
3) Messages
4) Sports mode - including Running/ Cycling/ Climbing/
Basketball/ Football/ Badminton
5) Sleep monitor
6) Blood Oxygen (SPO2) test
7) Blood pressure test
8) Heart rate monitor
9) Settings
10) Find your phone
11) Music Control
12) Stopwatch
13) Remote camera- support at APK/APP WEARFIT 2.0
14) Weather - It will be displayed only after your smart band is
successfully paired with your mobile phone.
NOTE: The weather icon may not appear if your smart
phone’s network (WIFI/Data Connection) is not in good
connection.
15) Flashlight
16) Brightness adjustment
17) Do not disturb mode
18) Vibration adjustment
Data can be sync from the wearable to the smart phone on
the WEARFIT 2.0 APK/APP.
Your smart phone will synchronize when the Bluetooth is paired
with this device.

FUNCTIONS
PHONE CALL NOTIFICATION - vibrating reminder for incoming
phone calls
MESSAGE NOTIFICATION - vibrating reminder for incoming
messages, including SMS, WhatsApp, Facebook, Twitter, Skype
messages, etc. You may need to turn it on at APP.
CLOCK SCREENS -six different home digital clocks; in the main
screen, long press the button to change it.
SLEEP MONITOR - supported on the WEARFIT 2.0 APK/APP. This
function automatically runs at night, and the data generates in
the mornings.
ALARM CLOCK - supported on the WEARFIT 2.0 APK/APP
SEDENTARY REMIDER(REMIND TO MOVE) - supported on the
WEARFIT 2.0 APK/APP
FIND THE DEVICE (Looking for the SMART BAND) - supported on
the WEARFIT 2.0 APK/APP
GESTURE CONTROL (Raise your hand to light up the screen.
Before using this function, you may need to turn it on at the
smart phone APP)
GPS MAP TRACE (view it on the BT APP/APK WEARFIT 2.0). On the
home page of the WEARFIT 2.0, tap the icon “Find/Discovery”
which is on the middle bottom of the interface tap the
“Exercise” icon tap Start tap the map icon to view the GPS
MAP Trace. GPS TRACE HISTORY can be shared to Facebook
and other APPs. This function GPS MAP TRACE won’t be
available until the APP WEARFIT 2.0 is log on via Facebook or via
email address.
Note: The text and icons in the smart band will be always in the
English language

**** THIS IS NOT A MEDICAL INSTRUMENT, SO THE VALUES ARE
APPROXIMATE
CLEANING:
In order to avoid any damage on the plating or printing of your
wearable please do not use any chemical product for
cleaning such as alcohol 96º. We recommend you to use a
slightly wet cloth.
TECHNICAL SPECIFICATIONS:
Display screen: Capacitive FULL touch screen 1.28".
Screen resolution: 240x240 pixels.
Internal Memory: RAM 128KB, ROM 512KB
System: Nucleus
CPU: HS6620
Charge I/O port : USB magnetic charging cable
Battery: Built in Li-Polymer 200 mAh
Stand by time: 10~15 DAYS
Working time: 5 DAYS
Bluetooth: 4.2
Water-resist Rating: IP67 (this device resists raindrops, it’s not
water proof)
Weight: 190 g

Declaration of Conformity
Hereby we,
Name of manufacturer:
SANTOSHI SL
Address:
CALLE FELIPE ASENJO N.56
Zip code & City:
28947 - FUENLABRADA ( MADRID )
Country:
SPAIN
declare that this DoC is issued under our sole responsibility and that this product:
Product description:
Smart Band
Type designation(s):
WS-2349
Trademark:
SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU
Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.
with reference to the following standards applied:
EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)
Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 15 / 07 / 2020