Sami wearable space kids WS-2371 User manual

WEARABLE
User Manual
WS-2371
Thank you for purchasing the Sami wearable WS-2371. Read the
instructions carefully to obtain optimum results and preserve it for
future reference. Sami has developed wearable devices since 2015 and
we use the best components possible for the product.

1. Quick start guide
Overview
1. Touch screen
2. Heart sensor
3. Charging PINS
Make sure the pins on the charging cable fit correctly
onto the charging terminals on the back of your smart
watch.
Plug the big end of the USB cable into the power
supply, match the magnetic end with the watch, after
charging successfully, a charging icon will appear on
the screen.
NOTE: Do not have the charger connected to AC and
the magnets touching any metallic surface, this will
create a high heating of the cable and will damage it

Thank you for purchasing the Sami wearable WS-2371.
Read the instructions carefully to obtain optimum results
and preserve it for future reference. Sami has developed
wearable devices since 2015 and we use the best
components possible for the product.
STARTING**
Install “Fit4Kid” app on the phone
Search and install the “Fit4Kid” app from Google Play or
App Store. Or scan the following QR code to install the
app directly.
Connect the smart watch with the phone
1. Enable Bluetooth on your smart phone.

2. Open the “Fit4Kid” app on your smart phone, and
then fill in all the requested information in the
“Settings” menu.
3. Tap “Connect device” in the “Settings” menu.
4. Select the smart watch icon to connect.
5. Choose your device name to connect it with your
phone.
6. Please note that you must connect through the app
and not by the bluetooth menu of your phone.
7. You will see pop up windows of permissions while
installing, please accept all of them for the correct
functioning specially referred to location and
background execution.
Unbind smart watch with mobile phone
1. Open “Fit4Kid” app on your smart phone.
2. Tap “Disconnect device” in the “Settings” menu and
confirm “OK”.
3. To disconnect your smart watch with an iPhone, click
“Disconnect device” in the “Settings” menu of
“Fit4Kid” app, and go to the Bluetooth settings on
your iPhone, then access and select “Forget This
Device”.
Operation Introduction
To turn on your watch, press and hold the key until
the display lights up.
To switch off the watch, slide the screen from right to
left on main interface to enter in sub-menu, and then
slide the screen up and down to enter in settings, you
will find power off icon there.

You can press the touch screen, or turn on gesture
control in advanced settings of Fit4Kid and then raise
your hand to light the screen.
2. How to use
Power on: Press and hold the button on the side of
the watch for about 3 seconds.
Go to main menu: Slide from right to left on main
interface; slide up and down to check more functions
Select a function: Slide up and down; tap the icon.
Confirm: Tap the icon.
Exit menu: Slide from left to right on the screen.
Check notifications: Slide from left to right on main
interface.

3. Main menu
After turning on the smart watch, the main interface will
be displayed.
From the main interface:
1. Go to the main menu
a. Slide from right to left to enter the main menu.
b. Slide up and down to check more functions.
c. Tap the icon to enter the sub menu. Slide from left to
right to return to the previous menu.
2. Go to the notification shortcut interface
Slide from left to right from the main interface.

3. Go to other shortcuts screen
Slide up and down from the main interface.
No. 1 Brightness
You can adjust screen brightness by click this icon.
No. 2 Find phone
When your smart watch is connected with Fit4Kid, you
phone will ring by click this icon.
No. 3 Shut down
You can shut down your smart watch by click this icon.
No. 4 About
You will find name, address, and firmware version by
click this icon.

4. Functions
Watch faces
There are 3 watch faces. In current watch face, press and
hold the center of the touch screen to choose the one
you like.
Daily activities
The watch will record your daily activity automatically.
Press the step icon to check pedometer, distance and
calories. After synchronizing with APP, these sports data
can be also checked in APP.
Heart rate monitor
Select the heart rate icon to monitor your current
heart rate. To exit the heart rate monitor, please slide to
right.

If you’ve connected your smart watch with APP via
Bluetooth, you can also check your heart rate data in the
app.
Multi-Sport
Tap the sport icon to enter the multi-sport mode.
The smart watch has 4 sports modes: walking, running,
hiking and cycling. Choose a sport mode you want, and
then do sports. The smart watch will record your
exercise data.
If you want to end the sports, slide the screen to right
and tap the stop icon to finish your sports and save the
data. The smart watch displays your exercise data after
that. If you’ve connected your smart watch with Fit4Kid
via Bluetooth, you can also check your exercise data in

the app.
Note: if the exercise time is less than 5 minutes, the data
cannot be saved.
Sleep monitor
The smart watch automatically monitors your sleep from
10p.m. to 9a.m.
When you get up the next day, the smart watch displays
your sleep report about the time of total sleep, light
sleep and deep sleep. If you’ve connected your smart
watch with APP via Bluetooth, you can also check more
detailed sleep report in the app.
Weather

If you’ve connected your smart watch with Fit4Kid via
Bluetooth, the smart watch will display the weather
forecast.
You can manually set the city or automatically set a city
in APP.
Alarm
By tapping the alarm icon, you can see the alarm
timer you’ve set in APP. When alarm time is up, the
alarm icon will be animated and the smart watch will
vibrate.
Notification
Slide the watch face from left to right, and then you can

check your phone calls, SMS, QQ, WeChat, Whatsapp,
Facebook and Twitter notifications, etc.
Remote capture
To use this feature, make sure the camera of your smart
phone is on. With the remote capture function, you can
take pictures remotely from your smart watch.
Music playback control
Tap the music icon to enter the music playback
control interface.
You can select the previous/next song, and play/pause
music. To exit music playback control, slide the screen
from left to right.
Stopwatch
Press Start to time ,To exit Stopwatch，slide the screen
from left to right.

Sedentary
Tap the icon to enter the sedentary settings. You
can turn the function on or off. Slide the screen to right
to exit. You can also go to the “Activity&Wellness” under
the “Health Reminder” of APP to set the time intervals
(minutes), start time and end time.
Children games
Tap this icon to enter the watch game function
Pedometer

Tap this icon to enter the Pedometer game. Completing
the corresponding steps will show different characters
Math
Tap this icon to enter the Math game. Each correct
answer is 10 points. If you collect 100 points, you will
pass the game.
Puzzle
Tap this icon to enter the Puzzle game, enter the game
and the final rendering will appear. Tap 9 pictures on the

screen to start the game randomly. Tap the picture next
to the space to swap positions with the space. After the
puzzle is completed, it will enter the next puzzle.
Settings
Tap the icon to enter the settings menu
About
Tap this icon to check the Bluetooth Mac address, device
name and firmware version of your smart watch.
Reset
Tap this icon to reset your smart watch.

Restart
Tap this icon to restart your smart watch.
Shut down
Tap this icon to shut down your smart watch.
**** THIS IS NOT AMEDICAL INSTRUMENT, SO THE VALUES
ARE APPROXIMATE
CLEANING:
In order to avoid any damage on the plating or printing of your
wearable please do not use any chemical product for cleaning such
as alcohol 96º. We recommend you to use a slightly wet cloth.

TECHNICAL SPECIFICATIONS:
Display screen: Full screen capacitive touch screen 1.30".
Screen resolution: 240 x 240 pixels.
Internal Memory: 32k RAM ROM 512k
CPU: Pixart PAR2860QN
Charge I/O port : USB magnetic charging cable
Battery: Built in Li-Polymer 150 mAh
Stand by time: 10-12 DAYS
Working time: 3-5 DAYS
G-Sensor: SC7A20
Health Sensor: HRS3301
Bluetooth: v5.1
Water-resist Rating: IP67 (raindrop resistance. This device is not
waterproof; do not drown it into water)
Weight: 45 g

Declaration of Conformity
Hereby we,
Name of
manufacturer:
SANTOSHI SL
Address:
CALLE FELIPE ASENJO N.56
Zip code & City:
28947 - FUENLABRADA ( MADRID )
Country:
SPAIN
declare that this DoC is issued under our sole responsibility and that
this product:
Product description:
Smart Band
Type designation(s):
WS-2371
Trademark:
SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU
Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.
with reference to the following standards applied:
EN 60950-1:
2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)
Signature
Full name: VISHAL MIRPURI
Position:ADMINISTRATOR
Date: 21 / 11 / 2022