Samsung AW25ECB7 User manual

DB98-27303A(1)

E-3
Contents
PREPARING YOUR AIR CONDITIONER
Safety Precautions ......................................................................................... 2
Description of Each Component .................................................................... 4
Remote Control - Buttons .............................................................................. 5
Getting Started ............................................................................................... 6
Inserting the Remote Control Batteries .......................................................... 7
OPERATING YOUR AIR CONDITIONER
Cooling Your Room ........................................................................................ 8
Airing Your Room ........................................................................................... 9
Removing Excess Humidity ............................................................................ 10
Adjusting the Air Flow Direction Horizontally .................................................. 11
Adjusting the Air Flow Direction Vertically ...................................................... 11
PROGRAMMING YOUR AIR CONDITIONER
Setting the On Timer ...................................................................................... 12
Setting the Off Timer ...................................................................................... 13
Setting the Sleep Timer .................................................................................. 14
Selecting Energy Saving mode ...................................................................... 15
RECOMMENDATIONS FOR USE
Temperature and Humidity Ranges ................................................................ 16
Cleaning Your Air Conditioner ........................................................................ 17
Troubleshooting .............................................................................................. 18
Technical Specifications ................................................................................. 19
......................................................................................................... 20

Front Grille
.
The Power Plug contains a Reset button that will automatically shut down
the air conditioner in the event of a power surge. To restart the unit, press
the Reset button and the unit will return to normal operation in 2-3 minutes.
Inner Air Flow
Blades Air Outlet
Ventilation Lever
Air Inlet (Outside)
Air Filter (Inside)
Power Plug
Sleep Timer setting button
Temperature Adjustment
Fan Speed Adjustment button

E-5
Remote Control - Buttons
Timer setting button
Temperature
Adjustment buttons
Fan Speed
Adjustment buttons
On/Off button
Sleep Timer setting
button
Mode selection
buttons
Energy Saver button

E-7
Inserting the Remote Control Batteries
Push the battery cover on the rear of the remote control with your thumb
in the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities :
X+ on the battery with + on the remote control.
X- on the battery with - on the remote control.
1
2
Close the cover by sliding it back until it clicks into place.
3
XUse two AAA, LR03 1.5V batteries.
XDo not use old batteries or different kinds of batteries together.
XBatteries may be completely discharged after 12 months, even
if they have not been used.
You must insert or replace the remote control batteries when :
XYou purchase the air conditioner
XThe remote control does not work correctly
±

R
I higher than the selected temperature,
the Air Conditioner starts cooling
A
C
A C
It will begin to cool after three minutes
R
is displayed.
You must select the Cool mode if you wish to lower the temperature
in your room. You can also set the Fan Speed.
F S
R
S
Remote Control Control Panel
The Air Conditioner starts up in Cool mode.

E-9
Airing Your Room
If you want to provide air circulation without cooling, you can use
the Fan mode.
If necessary, press the (On/Off) button.
Result: The Air Conditioner starts up in Cool mode .
The unit beeps twice.
2
To set the Fan Speed:
Press the , or button on the Remote control as desired.
or
Press the button on the unit one or more times until the
desired Fan Speed(F1, F2 or F3) is displayed.
4
To control the direction of the air flow, refer to page 11.
5
If the Fan Speed(F1, F2 or F3) is not displayed on the control panel:
Press the button on the remote control
or
Press the button on the unit one or more times until the Fan Speed
(F1, F2 or F3) is displayed.
Result:The unit beeps each time you press the / button.
The Air Conditioner starts up in Fan mode.
You can change modes at any time.
When the Air Conditioner is in Fan mode, the temperature
cannot be set or displayed.
3
Mode
Cool/Dry/Fan
Fan Speed
Mode
Cool/Dry/Fan
Remote Control Control Panel
1 If you wish to evacuate stale air outside, push the ventilation lever on the
front of the unit to the right and the open position (
).
Result: The air inside the room circulates and stale air is evacuated
outside.
Otherwise, push the ventilation lever to the left and the closed
position ( ).
Result: The air simply circulates inside the room.

E-10
Removing Excess Humidity

Remote Control Control Panel
If the temperature is not displayed on the control panel:
X Press the button on the Remote control
or
X Press the button on the unit one or more times until is displayed.
Result:
X The unit beeps each time you press the / button.
X The Air Conditioner starts up in Cool mode.
±
You can change modes at any time.
2
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1If necessary, press the (On/Off) button.
Result:XThe Air Conditioner starts up in Cool mode.
XThe unit beeps.
The Air Conditioner is fitted with a protection mechanism to pre-
vent the unit from being damaged when it is started immediately
after being:
XPlugged in
XStopped
It will begin to cool after three minutes.
3To adjust the temperature, press the
or buttons one or
more times until the desired temperature is displayed.
The temperature can be set between
64°F and 86°F .
Result:XEach time you press the
or buttons:
- The temperature is adjusted by 1°F
- The unit beeps
XThe Air Conditioner starts removing the excess humidity;
the quality of air is adjusted automatically.
4To control the direction of the air flow, refer to page 11.