Samsung AWT18YM Series User manual

AWT18YM Series
AWT24YM Series
AWT18WM Series
AWT24WM Series
AWT18WH Series
AWT24WH Series
Window-type Room Air Conditioner (Cooling)
DB98-28078A-6
USER'S MANUAL
EA

E-2
Safety Precautions
The following safety precautions must be taken when using your air conditioner.
WARNING
Risk of electric shock. • Can cause injury or death. • Disconnect all
remote electric power supplies before servicing, installing or cleaning.
• This must be done by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
Register your product at www.samsung.com/register
DURING OPERATION uUsers of this product are cautioned not to attempt repair of this product at their
own discretion. Instead, they are requested to directly contact a designated
service center or the outlet at which the product was purchased.
uNever spill any kind of liquid into the unit. Should this happen, unplug or main
switch off the unit and contact an authorized service center.
uDo not insert anything between the air outlet blades because the inner fan may
be damaged and could cause injury. Keep children away from the unit.
uDo not place any obstacles in front of the unit.
uDo not spray liquid of any kind into the indoor unit. Should this happen, switch off
the breaker used for your air conditioner and contact your installation specialist.
uMake sure that the unit is correctly ventilated at all times:
Do not place clothing or other materials over it.
uIf the wireless remote control will not be used for a long time, remove the
batteries. (If applicable)
uWhen using a wireless remote control, the distance should not be more than 7
meters from the air conditioner. (If applicable)
uThe air conditioner must be plugged into its own specific power source, which
must be installed in compliance with national wiring,earthing and safety
regulations.
uIf the power cord is damaged in any way, it must be replaced by the manufacturer
or its service agent or a similarly qualified person in order to avoid a hazard.
uThis device must be installed according to the national electrical rules.
uThe appliance must be installation that the plug should be easily accessible
after installation.
uIf the fuse on PC board is broken please change it with the type of T 3.15A 250V.
uThe breaker of the air conditioner should be all-pole switch; and the distance
between its two contacts should be no less than 3.5mm. Such means for
disconnection must be incorporation in the fixed wiring.
DISPOSING OF THE UNIT
uBefore throwing out the device, it is necessary to pull back the battery cells and
get rid of them safely for recycling reasons.
uWhen you need to dispose of the unit, consult your dealer. If pipes are removed
incorrectly, refrigerant may blow out and come into contact with your skin,causing
injury. Releasing refrigerant into the atmosphere also damages the environments.
uPlease recycle or dispose of the packaging material for this product in an
environmentally responsible manner.
O THERS
uNever store or ship the air conditioner upside down or sideways to avoid damage
to the compressor.
uThe appliance is not intended for use by young children or infirm persons without
supervision: Young children should be supervised to ensure that they do not play
with the appliance.
uMax current is measured according to IEC standard for safety and current is
measured according to ISO standard for energy efficiency.

E-3
 PREPARING YOUR AIR CONDITIONER
nSafety Precautions ........................................................................................ 2
nAir Conditioning Unit-Main Parts, Buttons and Display................................. 4
nRemote Control-Buttons................................................................................ 5
nGetting Started .............................................................................................. 6
nInserting the Remote Control Batteries ........................................................ 7
 OPERATING YOUR AIR CONDITIONER
nCooling Your Room....................................................................................... 8
nAiring Your Room.......................................................................................... 9
nRemoving Excess Humidity........................................................................... 10
nAdjusting the Air Flow Direction Horizontally ................................................ 11
nAdjusting the Air Flow Direction Vertically .................................................... 11
 PROGRAMMING YOUR AIR CONDITIONER
nSetting the On Timer ..................................................................................... 12
nSetting the Off Timer ..................................................................................... 13
nSelecting Good Sleep mode ......................................................................... 14
nSelecting Energy saving mode...................................................................... 15
 RECOMMENDATIONS FOR USE
nTemperature and Humidity Ranges .............................................................. 15
nCleaning Your Air Conditioner....................................................................... 16
nSolving Common Problems........................................................................... 17
 METHOD OF INSTALLATION....................................................................... 18
Contents
CAUTION
“The high inrush current of the starting compressor motor can have adverse effects to
the operation of other equipment under unfavorable mains conditions. This equipment
does not comply with the relevant technical standards for the limitation of voltage
fluctuations and flicker.”
Before connection this equipment to the power supply system, please report to your
suply authority and obtain the consent.
Do not connect other electric appliances to the same supply lines.

E-4
Air Conditioning Unit - Main Parts, Buttons and Display
Air inlet (Inside)
Air filter
(The air filter is
located inside)
Inner air flow blades
(right/left orientation)
Outer air flow blades
(up/down orientation)
Air inlet (Outside)
Ventilation lever
g Power cable connection
should be committed to
an installation engineer.
Power Cable
Temperature adjustment
buttons
Good Sleep button
Fan speed adjustment
button
Energy Saver indicator
Timer setting button
Energy Saver button
Operating mode indicators
(COOL,DRY,FAN)
Good Sleep indicator
Timer indicator
Air flow blade swing indicator
Remote Control sensor
ON/OFF button
g The design and shape are subject to
change according to the model.
Air outlet
Temperature / Timer
indicator
Operating mode selection
button (COOL,DRY,FAN)

E-5
Remote Control - Buttons
Timer setting button
Good Sleep button
Operating mode
selection buttons
Energy Saver button
Air flow blade swing button
Temperature adjustment
buttons
ON/OFF button
Fan speed adjustment
buttons

E-6
You have just purchased a window-type room air conditioner and it has been installed by your
installation specialist.
Your Owenr’s Instructions contain valuable information on using your air conditioner.
Please take the time to read them as they will help you take full advantage of the unit’s functions.
This Owner’s Instructions is just for using your air conditioner correctly.
Thus, the illustrations shown in this manual may not exactly match your air conditioners.
The booklet is organized as follows.
 The following figures are shown on pages 4 and 5:
- Air conditioning unit (main parts, buttons and display)
- Remote control (buttons)
They will help you find the buttons and understand the symbols displayed.
 In the manual, you will find a series of step-by-step procedures for each function available.
The illustrations in the step-by-step procedures use four different symbols:
 
PRESS PUSH IMPORTANT NOTE
Moreover,applicable, wherever the illustrations show the positions of the buttons on both the
remote control and the unit itself.
For the... The illustrations have a...
Remote control Gray background.
Example:
Unit itself White background.
Example:
Getting Started

E-7
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when:
 You purchase the air conditioner
 The remote control does not work correctly

Use two AAA, LR03 1.5V batteries. Do not use old
batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months,
even if they have not actually been used.
1 Push the battery cover on the rear of the remote control with your thumb in
the direction of the arrow and remove it.
2 Insert the two batteries,taking care to respect the polarities:
 + on the battery with + on the remote control
 - on the battery with - on the remote control
3 Close the cover by sliding it back unitl it clicks into place.
Result: You can control all the functions your air conditioning unit
directly from your seat, using the remote control.

E-8
Cooling Your Room
You must select the Cool mode if you wish to lower the temperature
in your room.You can also set the fan speed.
1If necessary, press the (On/Off) button.
Result:  The air conditioner starts up in the Cool mode.
 The unit beeps twice.
 The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
 Plugged in
 Stopped
It will begin to cool after three minutes.
2 If the COOL indicator is not lit up on the unit:
 Press the button on the remote control
or
 Press the button on the unit one or more times until the COOL
indicator lights up
Result:  The unit beeps each time you press the / button.
 The air conditioner starts up in Cool mode.
 You can change modes at any time.
3 To adjust the temperature, press the or button on the remote
control one or more times until the required temperature is displayed.
To adjust the temperature, press the or button on the unit one
or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:  Each time you press the temperaure buttons.
- The temperature is adjusted by 1°C and
displayed on the control panel
- The unit beeps
 The air conditioner starts cooling if the room temperature
is higher than the selected temperature.
Remote Control Control Panel
4To set the fan speed to... Then...
 Press the , or button on the remote control as desired
or
 Press the button on the unit one or more times until the the
desired fan speed(F1,F2, or F3) is displayed.
: Low Speed
: Med Speed
: High Speed
5To control the direction of the air flow, refer to page 11.

E-9
Airing Your Room
If the atmosphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
1 If you wish to evacuate stale air outside, push the ventilation lever on the
front of the unit to the right and the open position ( ).
Result: The air inside the room circulates and stale air is evacuated
outside.
Otherwise, push the ventilation lever to the left and the closed position ( ).
Result: The air simply circulates inside the room.
2If necessary, press the (On/Off) button.
Result:  The air conditioner starts up in the Cool mode.
 The unit beeps twice.
3 If the FAN indicator is not lit up on the unit:
 Press the button on the remote control
or
 Press the button on the unit one or more times until the FAN
indicator lights up
Result:  The unit beeps each time you press the / button.
 The air conditioner starts up in Fan mode.
  You can change modes at any time.
 When the air conditioner is in the Fan mode, the temperature is not
displayed; in this case, you do not need to set the temperature.
Remote Control Control Panel
4To set the fan speed to... Then...
 Press the , or button on the remote control as desired
or
 Press the button on the unit one or more times until the the
desired fan speed(F1,F2, or F3) is displayed.
: Low Speed
: Med Speed
: High Speed
5To control the direction of the air flow, refer to page 11.

E-10
Removing Excess Humidity
If the atmosphere in your room is very humid or damp,you can remove
excess humidity without lowering the room temperature too much.
1If necessary, press the (On/Off) button.
Result:  The air conditioner starts up in the Cool mode.
 The unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being.
 Plugged in
 Stopped
It will begin to cool after three minutes
2If the dry indicator is not displayed at the top of the control panel, press the
button on the control panel one or more times until it appears.
Result:  The unit beeps each time you press the button.
 The air conditioner runs in Dry mode.
 You can change modes at any time.
3To adjust the temperature, press the or buttons one or more
times until the required temperaturs is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:  Each time you press the or buttons:
- The temperature is adjusted by 1°C
- The unit beeps
 The air conditioner starts removing the excess humidity;
the quality of air is adjusted automatically.
4To control the direction of the air flow,refer to page 11.
Remote Control Control Panel