Samsung Yepp Sports YP-60 User manual

Connecting the USB cable
1Connect a USB cable to the USB port on the computer.
2Connect the opposite end of the USB cable to the
USB cable port on the right side of the yepp.
● If you disconnect the USB cable from your PC while
implementing a command or initializing during
USB driver installation, your PC may not function correctly.
3The USB driver is installed with a message saying that it
is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that
installation has been successfully completed.
4
Upon installation of the USB driver
"SAMSUNG YP-60” will appear in the
[Start] →[Settings] →[Control Panel] →
[System Properties] →[Device Manager].
➤Before connecting the yepp to PC, make sure to install yepp Studio.
Location of Controls
Turning Power On and Off
Playing Music Pausing Music
21
YP-60 Quick Guide
ENC/NAVI.
Button
Move to Track/
Speed Search Button Volume Button
MENU/
Loop Repeating Button
Sports Function Button
Play/Stop/Pause
On/Off Button
Display Hold Switch
Reset Hole
USB Cable
Connection Port
ENC Jack
Earphone JackHeart Rate Measurement Sensor
●Power On : Press and hold the button to turn on the power.
●Power Off : Press and hold the button to turn off the power.
Press the button.
●Playback starts. Press the button to pause playback. ●While in Pause mode, briefly press again to resume playback.
●If the device won’t respond even after pressing the buttons,
reboot it by pressing the Reset Hole with a pin.
USB connect cable

Downloading files
1Turn on the yepp and connect it to your PC.
2Select the file you wish to download from the Play List Window or File List Window.
●If the Play List Window is empty, use the [Open Files] button on the main window or
drag-and-drop the desired files from the File List Window to the Play List Window.
3Drag-and-drop the selected files to the Music folder in the yepp window or
click the [Transmit to yepp] button to move the files.
NN
NNoo oott ttee ee
●Refer to Help for more detailed information about using yepp Studio.
●When running the yepp Studio for the first time, input the serial number listed on the back of the yepp when the
Product Number Registration Window appears.
●You cannot use yepp Studio while Fitness Manager is running.
Viewing Help on yepp Studio
3 4
AH68-01563A (Rev 0.0)
: [Open Files] button
: [Transmit to yepp]
button
Run yepp Studio and press F1.
●Help will appear.
Move the arrow to the top of yepp Studio and right click on the
mouse. The following selection window will appear.
●Click on Help and the Help window will appear.
N