Samsung SND-560 User manual

SND-560
1/3" High Performance WDR Network Dome Camera
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
1/3" High Performance WDR Network Dome Camera SND-560 User’s Manual
ENGLISH

NETWORK CAMERA User’s Manual
2
NETWORK CAMERA User’s Manual
3
A brand that is integrated into Samsung's network products,
stands for a convenient world (Polis) made safe (Police) through Samsung's superior
network performance(Internet protocol). With products ' clear digital
images transmitted over the internet, real-time monitoring is possible anywhere with
an internet connection. Easy remote control functions and the use of existing
networks minimize installation costs. With experience a world of
convenience connected anytime, anywhere.
■ Preface
■ Note to User
Thanks for purchasing of SND-560 camera.
This is a user instruction manual for high resolution WDR network camera and the
product mentioned here designates the high resolution WDR network camera.
The user who installs and operates the product shall be aware of this manual and
other manuals referenced by this manual before the installation and operation and
use properly.
This manual and the software and hardware explained here are protected by
copyright law.
So the copy, reprint and translation to other languages of a part of or all contents of
this user manual without permission of SamsungTechwin Co., LTD are not allowed
except for the copy for general use within the scope of copyright law.
This machine’s electromagnetic waves have been registered as suitable for
business purposes; the retailer and consumer should be aware of this registration.
If in the case of wrongful purchases, please exchange the product for a home use
product.
This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer
could void the user ’ s authority to operate the equipment.
WARNING - To prevent electric shock and risk of fire hazards:
◆Do NOT use power sources other than that specified.
◆Do NOT expose this appliance to rain or moisture.

NETWORK CAMERA User’s Manual
4
NETWORK CAMERA User’s Manual
5
Contents
Contents
• If you refer to the enclosed Quick guide and the Manual in the CD, you can learn how to
use Network Manager.
Notes
Preface
  

Note to User 
Contents …………………………………………………………………………… 4

Product Warranty and Limitations  

Warning Symbols  
Precautions ……………………………………………………………………… 7
Ch1. Overview …………………………………………………………………… 8
1.1. SND-560 Network Camera Introduction  
1.2. Features  
Ch2. Production Description ………………………………………………… 10
2.1. Components and Accessories   
2.2. Section names and functions  
2.3. Recommended PC specifications  
Ch3. Installation and Network Setup …………………………………… 12
3.1. Camera Installation  
 3.1.1. When installing on a adapter plate   
3.2. Adjust the panning and tilting, rotating while watching the monitor    
3.3. Connecting to Monitor      
3.4. Connecting to Power     
3.5. Connection to External Control Connector  
3.6. Network configuration and connection method using Web page   
Ch4. How to Use Web Viewer …………………………………………… 24
4.1. How to Use Web Viewer      
 4.1.1. Login   
 4.1.2. Web Viewer screen  
4.2. Using Administration page   
 4.2.1. Initialization Screen after Connecting (Basic Screen)   
 4.2.2. Live    
 4.2.3. Basic   
 4.2.4. Network  
 4.2.5. Video Analytics  
 4.2.6. Privacy   
 4.2.7. Record (Using the SD Memory)  
 4.2.8. User  
 4.2.9. Motion Detection  
 4.2.10. Alarm/Sensor  
 4.2.11. Time  
 4.2.12. LOG   
 4.2.13. Upgrade   
 4.2.14. System Reboot  
Ch5. How to Operate Camera ……………………………………………… 60
5.1. Setup MENU  
5.2. How to Set Up Functions    
 5.2.1. LENS   
 5.2.2. EXPOSURE  
 5.2.3. WHITE BALALACE (WHITE BAL.)  
 5.2.4. BACKLIGHT   
 5.2.5. SSNR   
 5.2.6. DAY/NIGHT  
 5.2.7. IMAGE ADJ  
 5.2.8. SPECIAL  
 5.2.9. EXIT  
Ch6. Troubleshooting ………………………………………………………… 75
Specifications   
Dimension  

NETWORK CAMERA User’s Manual
6
NETWORK CAMERA User’s Manual
7
■ Product Warranty and Limitations
■ Warning Symbols
Danger
The manufacturers of this product do not take any responsibility for this product;
therefore, the manufacturer does not authorize the third-party, but allows that retailer is
responsible.
The product warranty does not extend to cover accidents, negligence, abuse, or wrongful
use for the whole or any part of the product. Additionally, the manufacturer does not
provide warranty for any additional parts or affiliations.
The warranty does not extend to malfunction in these areas.
Malfunction due to user’s negligence
Dismantlement or replacement by the user
Connection to alternate power source
Malfunction due to natural disasters (fire, flood, tsunami, etc.)
Replacement due to wear and tear
Instability of network
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Random replacement of built-in battery by other types of batteries may cause
explosion. The battery shall be replaced by the same battery. The used batteries shall
be disposed carefully because they can cause environment pollutions.
The battery shall be replaced by the same battery.
The used batteries shall be disposed carefully because they can cause environment
pollutions.
The lithium battery incorporated in this product is not user replaceable. Replacement
of the lithium battery will be done by a trained technician.
For information on its replacement, please contact your service provider.
Danger :
Misuse or wrongful operation of the product may result in death, injury or bring about other
fatal results. It indicates absolute caution when operating.
Caution :
Misuse or wrongful operation of the product may result in slight injury or
damage to the product. It indicates caution when operating.
Note :
Indication that the user needs to be aware of certain matters, or will find matters
helpful in operating the product.
Samsung Techwin cares for the environment at all product manufacturing stages
to preserve the environment, and is taking a number of steps to provide
customers with more environment-friendly products.The Eco mark represents
Samsung Techwin’s will to create environment-friendly products, and indicates
that the product satisfies the EU RoHS Directive.
Precautions
Do not install under extreme
temperature conditions.
Do not install in high humidity
environment.
The lens is the most important component of
the camera. Be careful not to smear it with
fingerprints.
Severe lighting changes or flickering may hinder
normal camera operation.
May lower image quality.Use only under temperature conditions between
-10ºC and +50ºC. Provide good ventilation when
using in high temperature conditions.
Avoid touching the camera lens.
Do not drop the camera or subject
it to physical shock.
May damage the CCD.May cause a product malfunction.
Never keep the camera face to
strong light directly.
Do not install under unstable
lighting conditions.

NETWORK CAMERA User’s Manual
8
NETWORK CAMERA User’s Manual
9
• Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
• Ensure that the power source complies with normal specifications before supplying it to
the camera.
Notes
Do not expose the camera to
radioactivity.
If it is exposed to radioactivity, For heated CCD, it
will be out of order.
Precautions
Ch1. Overview
1.1. SND-560 Network Camera Introduction
1.2. Features
The SND-560 is a high-tech network camera that uses MPEG-4 codec technology
to allow high compression rates and clear picture quality by allowing for high
frame rates to be transmitted through the network.
By using the network, remote connection, monitoring, and control is possible
from any location for simple use; additionally, set-up requires only a network.
The SND-560 Network Camera utilizes embedded software solutions (Embedded
Web Server, Embedded Streaming Server, Network Protocol) developed by
SamsungTechwin, and guarantees performance and safety while offering
various solutions through Internet integration.
Wide Dynamic Range (WDR)
High sensitivity against low illumination
The main function of the Wide Dynamic Range (WDR)
is to accumulate the scope of contrast between the
brightest and darkest points in the picture. WDR
employing SV-IV chipset provides prominent back
light compensation effect in high-contrast
environment.
Diagonal 6 mm (1/3”) CCD of enhanced sensitivity
and DSP chipset catch contour and color of objectives
only with starlight illumination in the dark, which
provides reliable outdoor surveillance performance.
- 0.001Lux (Lux for color mode)
- 0.00004Lux (Lux for black and white mode)
DAY & NIGHT fuction
Day & night function and Sens-up function by ICR (IR
Cut-Filter Removal) operation produce high quality
images for 24 hours.
Sens-Up function delays exposing time to improve
CCD sensitivity.
Day & Night function allows users choose color
mode or BW mode depending upon illumination.
PoE (Power Over Ethernet)
PoE function is to supply power through the LAN
cable together with data transmission without power
cable for user convenience.
DIS (Digital Image Stabilizer)
DIS (Digital Image Stabilizer) function compensates
camera shaking to obtain clear-cut images.
SD Memory function
SD Memory function is to memorize an event at the
SD Memory when it activated.
Privacy function
Privacy function is to determine surveillance area not
to display on the monitor for privacy protection.
Multi-channel Real-time image
encoding
Single Chip MPEG4 and JPEG codec enables real time
image encoding and transmission through multi-
channel of classified resolution of D1/CIF/QCIF.
High Resolution
The horizontal resolution of 560TV lines at color mode
and 700TV lines at BW mode can be achieved by
using a high density SONY CCD having double speed
410,000 pixels, which provides clean, noiseless and
reliable pictures.

NETWORK CAMERA User’s Manual
10
NETWORK CAMERA User’s Manual
11
Ch2. Production Description
1SND-560 2User’s Manual / CD / Quick Guide
3DC 12V Adaptor / Power Cord 4Cross Cable
5M4 Tapping Screw 3EA 6Installation Video Output Cable
7Installation Template
2.1. Components and Accessories
❶2
6 7
3 4
5
❿
⓫
1
2
3
6 7 8 9
4
5
❶ Pan Base : control panning angle of camera
2 Rotate Base : control rotating angle of camera
3 x3.6, 2.8 - 10.0mm (F1.2)
4 Rotate Base Holding Screw : fix rotated position
5 Pan Base Holding Screws (Color : black) : fix panned position
6 Audio Input/Output Jack 7 Alarm Jack
8 Ethernet 9Power
❿Shield Case ⓫Dome Cover
• When you connect SND-560 network camera to the PoE apparatus, the voltage
transferred via LAN cable may be abnormally high. Please contact to our distributor for
installation or dismantling PoE system.
Notes
2.2. Section names and functions
Ch1. Overview
High data compression ratio
Additional functions
High compression in MPEG-4 provides fast
transmission and relatively high volume transmission
of frame in the same network band.
SENS-UP, Mirror, SHARPNESS, SYNC choice (INT/LL)
Combination of motion detection and
alarm
Combination of motion detection, video analytics and
alarm enables still image storage in the SD Memory
or transmission of still image via email or FTP.
SSNR (Samsung Super Noise
Reduction)
Samsung’s high performance DSP chipset SV-IV
reduces GAIN variance effectively to deliver clean and
clear-cut images.
Real time interactive audio Transmission

NETWORK CAMERA User’s Manual
12
NETWORK CAMERA User’s Manual
13
1) Separate the dome cover by counterclockwise rotation.
2) Separate the shield case by pulling from the camera body.
Ch3. Installation and Network Setup
3.1. Camera Installation
2.3. Recommended PC specifications
Latch
Locking direction
[Figure-1]
Unlocking direction
(Counterclockwise)
Locking direction
(Clockwise)
Main Body
(Camera)
Shield Case
Dome cover
* To install the dome cover on the camera body, turn the
latches in locking direction as shown in the figure 1.
• The installation should be done by qualified service personnel or sysytem installers.
• If the ceiling material is not strong enough to hold the installation screws, the camera may
fall off. Reinforce the ceiling as needed.
Notes
3.1.1 When installing on a adapter plate
 Place the installation template on the installation
surface.
 Bore three holes signed on the installation
Template through the installation surface and
place the camera body and fix it with the M4
tapping screws.
 When placing the camera body on the plate,
make sure the power and the ETHERNET cables
pass through their respective designated
holes.(When placing the cable through its
side, thread it through the hole at the bottom.)
 After installation and adjustment of the
camera are complete, secure the dome cover
by turning it clockwise.
Unlocking
direction
Dome cover
adapter
plate
An arrow for installing directions
CAMERA
Locking
direction
Items Specifications
CPU Intel core2 duo E4300 or higher processor
Main Memory 2GB or higher RAM
VGA 256M or higher recommended
OS Window 2000, XP, 2003
Web Browser Internet explorer 5.5 or higher
Resolution 1024*768 or higher
Network 10/100 Base-T Ethernet
DirectX 9.0C or higher
Ch2. Production Description

NETWORK CAMERA User’s Manual
14
NETWORK CAMERA User’s Manual
15
Ch3. Installation and Network Setup
3.2. Adjust the panning and tilting, rotating while watching the monitor
73˚
-170˚
145˚ 195˚
170˚
Pan Base
Tilt Base
Rotate Base
1) You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism.
 •PanBasemovesby170˚toeachsidedirectionand340˚onthewhole.
 •TiltBasecoverstotal146˚angle(73˚toeachside).
 •AnglerangeofRotateBaseisthesameasthatofPanBase.ButOnesiderangeis195˚
andanotheris145˚
2) Methods of adjustment
•Thecaseofwallinstallation
1 Aftermountingthecameraonawall,adjustingthepanninganglesothatthecameracan
face the direction to monitor when tilting.
2 Andthenadjustthetiltinganglebyrotatingthetiltbase.
3 Loosentherotatebaseholdscrewandadjustrotatebaseforthebestmonitoring.
4 Tighten the rotate base hold screw.
•Thecaseofceilinginstallation
1 Aftermountingthecameraonaceiling,adjustingthepanningangleforbettermonitoring
area by rotating the pan base.
2 Andthenadjustthetiltinganglebyrotatingthetiltbase.
3 Loosentherotatebaseholdscrewandadjustrotatebaseforthebestmonitoring.
4 Tighten the rotate base hold screw.
3.3. Connecting to Monitor
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
• As the connecting method varies with the instruments, refer to the manual supplied with the
instrument.
• If necessary, you can connect the monitor to the REMOTE jack on the body of your camera.
• Only connect the cable when the power is turned off.
SND-560 Network Camera Monitor
• This product is the network camera which transmits video through network, video output
terminal is for installation and used to determine imaging range when installing the product.
• Please make sure that the video output terminal of this product is not connected to any
recording equipment as this can cause problems.
Notes

NETWORK CAMERA User’s Manual
16
NETWORK CAMERA User’s Manual
17
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the
camera may affect the performance of the camera.
 Standard voltage for camera operation : DC 12V±10%, AC 24V±10%
 There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size (AWG) #24(0.22mm2)#22(0.33mm2)#20(0.52mm2)#18(0.83mm2)
Resistance (Ω/m) 0.078 0.050 0.030 0.018
Voltage Drop (V/m) 0.028 0.018 0.011 0.006
Ch3. Installation and Network Setup
3.4. Connecting to Power
■ AC/DC Power
Both of AC24V and DC12V can be used for the input power of this product.
When using other adaptor not the adaptor (DC12V/4A) provided by the company, make sure
that the specification is over AC 24V/1A or DC12V/2A.
■ PoE(Power Over Ethernet)
POE(Power Over Ethernet)is the function of LAN related devices, which supports data and
power simultaneously with only connection of LAN cable without separate power input cable
installation for power excitation to the product.
When connecting camera to PoE device, please connect to the device complying with PoE
(IEEE802.3af) specifications. In case non-standard product is used, it may cause performance
degradation or trouble.
The input order of terminal from left is Alarm input/Alarm output/Ground.
When connecting cable, push stripped part of electric wire in while pushing quadrangle button
and take hands off from the button then the wire will be fixed.
■ AC/DC Combined use
• In case PoE and power adaptor are connected to camera simultaneously, the power
authorized first by the product is used.
Notes
3.5. Connection to External Control Connector
❶
Alarm Input
2
Alarm Output
3
Ground

NETWORK CAMERA User’s Manual
18
NETWORK CAMERA User’s Manual
19
CMOS Output
GND
Open Collector
2.2KΩ
10KΩRelay
Power
Output
Alarm Out
Relay Relay
Ch3. Installation and Network Setup
■ Connecting Alarm Input
This is the input terminal for external alarm signal, use it by connecting as following.
■ Connecting Alarm output
This is the output terminal for external alarm signal, use it by connecting as following.
• In case of selecting Normal Open at setup menu :
In case of contact type, it is short and in case of active type, sensor input acts at “LOW” level.
• In case of selecting Normal Close at setup menu :
In case of contact type, it is open and in case of active type, sensor input acts at high
impedance status(open collector).
• Alarm output part is Open Collector structure and can be composed by using relay. Rated
maximum value is DC +24V, 100 mA.
Sensor
Camera
Internal
GND
Alarm In
10KΩ
120Ω
3.3V
Sensor Input
5.1KΩ

NETWORK CAMERA User’s Manual
20
NETWORK CAMERA User’s Manual
21
Ch3. Installation and Network Setup
3.6. Network configuration and connection method using Web page
Use when there is one SND-560 network camera to be installed.
1. Please connect user’s PC to SND-560 network camera using cross cable.
2. Please launch a Web browser on user’s PC and enter [192.168.1.100] in the URL address
field and push <Enter> button. Connect to Webviewer login window of SND-560 network
camera.
3. Please login with administrator’s authorization and move to ‘Network’ page.(Default value
for administrator login is ID: admin, PW:11111111)
Note
Note
• Default value is ID: admin, PW: 11111111
• After pressing internet protocol (TCP/IP)
properties, press the ‘advanced’ button
to go into advanced configurations.
• Add with 192.168.1.XXX.
• 192.168.1.100 is the IP address for the camera and will be unavailable as an internal IP
address.
Notes

NETWORK CAMERA User’s Manual
22
NETWORK CAMERA User’s Manual
23
Ch3. Installation and Network Setup
4. Please configure according to the network environment where SND-560 network camera
will be installed and push <Save> button to save the configuration.
①
LAN / xDSL/ DHCP Configuration
②
Port Configuration
Item Description
LAN Use
When network product is connected to normal local LAN or when
connected to static IP, the network data to be allotted to the IP is
configured.
xDSL When using xDSL dynamic IP, enter the ID and PW.
DHCP
When automatically receiving IP through DHCP server, the DHCP
functions are activated. ‘DHCP’ is used in the LAN environment where
the DHCP is activated. Generally, for mid/large scale, DHCP servers are
operated through LAN and for small-scales, IP sharers use DHCP
functions.
Item Description
Port Setting The connection port and http, ftp port configurations can be set here
and the DDNS use can be checked.
Note
• Use DDNS changes its IP address every time the user attempts to connect to the
ISP and when the product is connected to a cable modem or xDSL modem. In this
case, the user cannot know the changed IP address. When a product that uses
dynamic IP is registered on the DDNS server, when wishing to connect to the
product, the changed IP address can be easily recognized. Register the product in
the DDNS server in order to register the IP address in the DDNS server. Enable the
“Use DDNS” option and enter the submitted ID and password into the server.

NETWORK CAMERA User’s Manual
24
NETWORK CAMERA User’s Manual
25
Ch4. How to Use Web Viewer
4.1. How to Use Web Viewer
4.1.1. Login
4.1.2. Web Viewer screen
To connect the login page, enter IP address of the camera on a internet Web browser and push
enter key.
Web Viewer screen is composed of menu area for camera/video configuration and screen area
for displaying input video from camera.
Video Analytics (Convert to Video Analytics mode)
This button is activated when the Video Analytics Enable option is selected on the
Video Analytics page.A menu arrangement of the Analytics mode is different with
one of the Control mode.
Enter user ID and password and push <Login> button, then it move to related Web page.
(Default value is ID: admin, PW: 11111111 ) If you click <Guest> button, it move to WebViewer
page under the Guest authenticated status. In this case, administrator should permit the Guest
connection.
■ Controls
SND560
Note
• If you logged in first as a administrator mode, please change the password
of administrator. It can prevent from other users connection to
administration page.

NETWORK CAMERA User’s Manual
26
NETWORK CAMERA User’s Manual
27
SND560
SND560 SND560
SND560
Ch4. How to Use Web Viewer
RESET (Displayed when the Video Analytics mode is on)
This sets the current screen image to the background.
Flip Image
Turns the screen upside down.
Stretch Image
Expands the screen to the size of D1 when selecting CIF and QCIF for resolution.
Save Image
Saves the channel screen as a JPEG file.
Compression
Video compression mode (the mode of compressing
video)
- MPEG, JPEG
Resolution
Video resolution (the size of video screen transmitted)
- NTSC : D1(704x480), CIF(352x240), QCIF(176x120)
- PAL : D1(704x576), CIF(352x288), QCIF(176x144)
Frame Rate - Setting on the Basic page
The number of maximum video frame transmitted for
each second.
Alpha branding (Displayed when the Video Analytics mode is on)
Makes changed parts appear half-transparent.
• It is not recommended to use alpha branding in the low specification system.
Notes
SND560

NETWORK CAMERA User’s Manual
28
NETWORK CAMERA User’s Manual
29
How to Use the Camera
- 1, 5, 10, 15, 20, 25, 30
Quality - Setting on the Basic page
Video quality
- Very High, High, Normal, Low,Very Low
Ch4. How to Use Web Viewer
SND560
Pause : Stops video for a while.
OSD : Displays related information.
Day&Night : Day&Night configuration function (Color, B/W configuration)
<↑>, <↓> button : Moves selection displaying arrows up and down on camera OSD menu.
<←>, <→> button : Changes configuration of selected field on camera OSD menu.
<Set> button : Displays camera OSD or moves to upper/lower menu of selected field.
<Exit> button : Terminates camera OSD.
Camera Setup : Displays OSD control button of camera.
Displays the title
Camera OSD is displayed
Removes the title
SND560
■ Instruction for Camera OSD control button
*ForconfiguringthefunctionanddetailoperatingmethodofSND-560networkcamera,refer‘ch5.
HowtoOperateCamera’.

NETWORK CAMERA User’s Manual
30
NETWORK CAMERA User’s Manual
31
Ch4. How to Use Web Viewer
4.2. Using Administration page
4.2.1. Initialization Screen after Connecting (Basic Screen)
When connection is successful, the below screen will be displayed.
4.2.2. Live
Please Move to Web Viewer page
[Web Viewer live screen]

NETWORK CAMERA User’s Manual
32
NETWORK CAMERA User’s Manual
33
Ch4. How to Use Web Viewer
4.2.3. Basic
Setup menu for basic configuration.
■ Video/Audio Setup
■ Product Information
Item Description
Video Format If you select the type of camera installed (NTSC or PAL), you can
choose the size of the view on the camera.
Item Description
Compression Type Video compression type (This defines how the video is
compressed.)
Initial Resolution Defines the size of the live screen view.
Video Quality
Selects the video quality.You can still view uninterrupted video
with the quality reduced if you use a low speed Internet
connection.
Video FrameRate Defines how many frames the camera will transfer per second.
Video Channel Defines what video channel will be used by the camera.
Audio-In Channel Determines whether to use an audio input channel for the camera.
Audio-Out
Channel
Determines whether to use an audio output channel for the
camera.
Max User Count Specifies how many users (up to 20) can connect to the camera via
the network.
Microphone
Sensitivity
Audio Amplifier
You need to set the sensitivity to Low with an amplifier-equipped
microphone and to High with an amplifier-free Microphone (set it
to low for line-in signals).
Item Description
Model Describe camera model.
Mac Address Describe MAC address of camera.
Camera Name Name each camera to identify multi cameras on the network.
Location Describe each camera location.
Description Describe more information of camera.
Memo Describe contact number of the camera operator.

NETWORK CAMERA User’s Manual
34
NETWORK CAMERA User’s Manual
35
Ch4. How to Use Web Viewer
4.2.4. Network
Network Configuration menu.
■ Network Configuration
■ Port/DDNS Configuration
■ Continuous Jpeg Image Transmission
Item Description
LAN Configure network assignment information of a camera connected
to the local area network or to the static IP of xDSL modem.
xDSL For dynamic IP of xDSL, enter ID and password of xDSL in the
username box and password box.
DHCP For IP router or cable modem interface, select DHCP.
Item Description
Connection Port Connection port is to control communication with camera. (Default
: 4000)
HTTP Port/
FTP Port
HTTP /FTP port is to access to the camera web page or to use FTP
function. (Default : http=80, ftp=21)
Use DDNS Determine use of DDNS server. DDNS allows you to connect to the
server transforming dynamic IP.
Item Description
Enable Determine use of Continuous JPEG Image Transmission function.
FrameRate Determine frame rate (frame per seconds) to send out.
Server Name Enter domain name or IP address of the FTP server.
Home Directory Configure home directory to store assigned data of the FTP server.
User ID Enter ID to access to the FTP server.
User Password Enter Password to access to the FTP server.
You can select LAN interface for static IP configuration, xDSL modem and DHCP for cable
modem.

NETWORK CAMERA User’s Manual
36
NETWORK CAMERA User’s Manual
37
Ch4. How to Use Web Viewer
■ Continuous Jpeg Image Transmission
Item Description
RTSP/TCP Enable Determines whether to use RTSP/TCP.
RTP/UDP Enable Determines whether to use RTP/UDP.
RTP/
Multicast Enable Determines whether to use RTP/Multicast.
Streaming Image The default setting of Multicast IP is 224.0.1.1.
Resolution Determines the resolution of the Streaming Engine.
• Unicast RTP streaming (RTP over UDP) is the adequate image transmission method to send
out the latest image despite of video loss.
• RTP over RTSP (RTP tunneled over RTSP) is useful to install a relatively simple firewall which
accepts RTSP data streaming.
• Multicast RTP (RTP over UDP) sends out the latest video image to the users anytime despite
of video loss.
• It is more efficient to use broadband transmission to broadcast video image for multi users
simultaneously. Since multicast through internet is not available, you need a router to allow
multicast.
■ DDNS Usage
Registration process of DDNS is as following
The website is ‘www.samsungipolis.com’.
❍

Step1) Complete the registration form in iPOLiS website.
Figure 1. Website of iPOLiS
Figure 2. Membership Registration: SIGNUP
Note
Note
• Unicasting is adequate to VOD (Video On Demand) broadcasting, since it
sends out video data only with data transmission demand.
• Up to 10 connections at the same time may be regarded as one connection.

NETWORK CAMERA User’s Manual
38
NETWORK CAMERA User’s Manual
39
Ch4. How to Use Web Viewer
Figure 3. Membership Registration: Input your information.
Figure 4. Login
Figure 6. Product Registration.
(Confirm repetition certainly at domain registration.)
❍

Step2) Register the equipment after login.
Figure 5. The list of registered equipment.