Sana 727 Supreme User manual



Safety precautions
Ingredient preparation and troubleshooting
Parts and assembly
Operating the Sana Supreme
Cleaning the Sana Supreme
Recommended juicer settings
Specifications
04
06
08
12
16
20
21
SANA SUPREME INSTRUCTION MANUAL
1. This juicer is intended for household use only.
2. Please read this instruction manual thoroughly before using the juicer.
3. After reading, please keep this instruction manual in a readily accessible place.
4. The product specifications are subject to change without notice for quality improvement purposes.
5. Please keep your receipt and warranty card and contact your dealer for any service or warranty needs.

Page 04
Warning Failure to comply with the label instructions may result in injury.
Do not plug or unplug the power cord with wet hands.
Only use with 220-240V power
Failure to follow this instruction may result in electric shock, fire, or unsatisfactory
performance. Connecting to a different voltage may shorten the motor's lifespan
or cause it to malfunction.
Securely plug the power cord all the way into an outlet.
Failure to follow this instruction may result in electric shock or fire.
Do not forcibly bend, tie, or pull the power cord. Do not place it near a high-
temperature source or heat source, such as a gas cooktop. Do not place
any heavy objects on top of it, wedge it into a narrow space, or alter it.
Doing so may damage the power cord, causing fire or electric shock.
Do not attempt to open or repair the juicer. Do not insert any foreign ob-
jects, such as a knife blade or screwdriver, into any seams or holes in the
main body. Failure to follow this instruction may result in fire, electric shock, injury,
or malfunction. For warranty service or repair, please contact the retailer where
you purchased the juicer.
If the power cord is damaged, do not attempt to repair or alter it yourself.
Please replace it with a new power cord.
Failure to follow this instruction may result in fire, electric shock, or injury.
Do not let the main body come in contact with water or splash water over
it. Make sure that no water or foreign material enters the switch on the product.
Do not operate the switch with wet hands.
Failure to follow this instruction may result in electric shock or fire.
For your safety, check whether your outlet is grounded. (Make sure that you
use a grounded outlet.) They should not be grounded to gas pipes, plastic
water pipes, or telephone lines. Failure to follow this instruction may result in
electric shock, fire, malfunction, or explosion.
Never attempt to dismantle any parts of the drum set or put foreign objects
such as a finger or spoon into the feed chute or juice outlet while the juicer
is running.
Failure to follow this instruction may result in injury, accident, or malfunction.
Do not use the product within reach of children.
Children should be supervised to make sure that they do not play with this prod-
uct. Children may accidentally touch or push over the product, causing injury,
product damage, or malfunction.
Do not use the juicer before familiarizing yourself with its operation.
Anyone with physical or mental limitations or who are unfamiliar with the juicer
should not operate it without supervision.
Do not start the product without the drum cap attached.
Failure to follow this instruction may cause injury or malfunction.
Do not operate the product unless the drum set is securely attached to
the main body. Failure to follow this instruction may cause injury or malfunc-
tion.
If there is a gas leak, such as a gas line leak, open the windows, thorough-
ly ventilate the area, and do not touch the power cord. Failure to follow this
instruction may result in injury, malfunction, or fire.
Safety precautions

Page 05
Warning Failure to comply with the label instructions may result in injury.
Safety precautions
Do not put your fingers or other foreign objects in the hole into which the
auger fits. Never insert a chopstick, spoon, etc., into the juice/pulp outlet.
Failure to follow this instruction may cause injury or malfunction.
Do not use anything, such as a chopstick, spoon, or hard object other than
the pusher, when you push your ingredients into the feed chute. Failure to
follow this instruction may cause injury or malfunction.
Do not move the main body, or disassemble or assemble the drum set or
parts, while the product is running. Failure to follow this instruction may cause
injury or malfunction. Make sure that you stop the product and unplug the power
cord first.
Pay attention while using the product to prevent articles you may be wear-
ing, such as a necktie, long necklace, scarf, etc., from being pulled into the
feed chute. Failure to follow this instruction may result in injury, malfunction, or
damage.
Place the product on a flat, even surface in an organized space when you
use it.
Failure to follow this instruction may cause injury or malfunction.
Do not subject the product to extreme shock or drop it.
Failure to follow this instruction may result in electric shock, damage, or fire.
If the product produces unusual sounds, excessive heat, or smoke, stop
using it immediately and contact your retailer.
The smell that a new product produces naturally goes away after a few uses.
Disconnect the power cord from the outlet when the product is not in use.
Make sure that you unplug the power cord by pulling the plug straight out.
Pulling the cord may result in injury, electric shock, or fire.
Do not clean the product at 80ºC or a higher temperature. Do not put it in a
dishwasher, dryer, microwave, etc. Failure to follow this instruction may cause
malfunction or deformation of parts.
The appliance weighs approximately 5 kg. When you move it, make sure
that you securely hold its main body with both hands. If you move it by just
holding the drum set or holding the product incorrectly, the main body may fall,
causing injury or malfunction.
This appliance is for household use only. Do not use it for commercial pur-
poses.
Do not attempt to extract juice from a large amount of ingredients at once. Do-
ing so may damage the parts.
Do not operate the juicer with the juice cap closed. This can cause juice to
leak into the motor base. Close the juice cap after juicing is finished, to prevent
dripping when removing drum from the main body.
Note that small lines or circles in plastic parts are the result of the manufac-
turing process and not a defect.

Page 06
Ingredients that require attention and how to prepare them
When juicing large batches, repeat the process of juicing about 1 kg of an ingredient, disas-
sembling the product, and then washing it.
With ingredients that have lost their freshness after being refrigerated for a long time, soak
them in fresh water for 10 minutes before use.
When processing dried ingredients (e.g., dried herbs), make sure that they are completely
dry to the point where you can easily crush them with your fingers.
Do not juice or process the following ingredients. They can damage
the juicing screen and auger.
-Dry ingredients such as sesame seeds, coee beans, and dried beans.
-Produce without sucient fiber including linden fruits, prickly pears, and
aloe vera.
-Canned or soaked fruits.
-Spices such as black pepper or cinnamon.
-Dried grains including rice, barley, and wheat.
-Frozen ingredients including frozen fruits or meat. These must be thawed
slightly before processing.
-Pitted fruits such as cherries, peaches, plums, and mangoes. The pit must
be removed before juicing.
Please consume any juice immediately for the best taste and nutrition.
Otherwise store in the refrigerator up to 24 hours.
When using the homogenizing screen, please insert ingredients slowly
and allow the juicer to process them before adding more.
Do not juice pulp a second time.
Thaw any frozen ingredients slightly, and cut into small pieces before
processing.
Do not operate the juicer empty without produce in it.
Do not let the product run while it is empty, before you insert any
ingredients in it.
Safety precautions
Pear, Kiwi, Korean
Melon, Apple,
Grape, etc.
Watermelon,
Pomegranate, Or-
ange, Grapefruit,
Melon, Lemon,
etc.
Mango, Persim-
mon, Peach, Plum,
Cherry, Japanese
Apricot, etc.
Water Parsley,
Ashitaba, Wheat
Grass. etc.
Ginger, Carrot,
Dandelion, Potato,
Deodeok, Pine
Needle, Kudzu,
etc.
You can extract juice from pears, kiwis, and Korean melons, including their
seeds and skin. However, apple seeds are poisonous and the stem end of
Korean melons tastes bitter, so it is better to remove those before juicing. With
grapes, pluck each grape from the bunch in advance.
Remove the outer skin of these fruits and vegetables, and then cut
the flesh into pieces small enough to go through the feed chute. With
pomegranates, peel their outer rind, and only use its seeds and arils.
Make sure that you remove all the unchewable hard seeds or pits be-
fore you juice these fruits. Otherwise, the product may stop operating or
its parts may become damaged.
Cut these tough, long fibrous vegetables into 3 - 4 cm pieces.
It will be more manageable if you grab a handful of those pieces and
then insert them into the product.
Make sure that you clean root vegetables under running water and
remove all dirt and other foreign substances before use. Thinly slice
fibrous ingredients, such as ginger and kudzu, and slowly insert a small
amount at a time. With pine needles, soak them in water for about an
hour and then insert them into the product while they are still wet.

Page 07
Please check the following troubleshooting steps before requesting
repair. If you need service, please contact the retailer from whom you
purchased the juicer. Be sure to have your warranty card available when
contacting them.
The juicer makes a strange or loud sound.
- It is normal for the juicer to be loud when processing solid ingredients like
carrots or beets.
- Make sure the juicer is on a flat and level surface when operating it.
- Make sure that no foreign objects such as small pebbles got into the feeding
tube.
The juicer is giving a low yield of juice.
- Make sure the juicing screen is clean and not clogged.
- Only use fresh and firm produce. Do not attempt to juice frozen produce.
- Soft fruits such as peaches and soft apples do not have a sucient water
content to make much juice and instead make more of a puree. Use these
types of ingredients as complements to other juices.
The auger stopped rotating
- Make sure not to overfeed the juicer. The auto reverse function will attempt
to clear any jams.
- Cut firm ingredients like beets and carrots into smaller pieces, and feed them
slowly.
- Thaw any frozen produce slightly before processing.
Troubleshooting
Do not insert anything into the feeding tube besides the pusher,
including kitchen utensils or tools. It may get caught in the auger, causing
the auger and juicing screen to break. It can also cause personal injury.
Do not overfeed the juicer. Allow the juicer to process each ingredient
before adding more. Overfeeding can result in pulpier juice, and can
cause the juicer to jam.
Do not get water or juice into the operating dial. It can cause damage or
electrical shock.
Do not operate the juicer with the juice cap closed. Juice can back up into
the motor gasket causing damage or electrical shock.
Make sure to thoroughly dry the juicer after use. The stainless steel parts
can corrode or rust if exposed to salt or other minerals.

Page 08
Pulp outlet
Power Dial
Juice Outlet
Feed Chute
1 Parts and Assembly

Page 09
01
03
05
09
02
04
06
10
11
14
12
15
13
14
15
16
17
18
18
16
04
07
08
Pusher
Main Body
Drum
Juice Cap
Auger
Fine juicing screen
Coarse juicing screen
Homogenizing screen
Drum Cap
Pulp blade
Drum Cap gasket
Blade Stopper
Spare Blade Stopper
Cleaning Brush
Juice glass
Pulp Cup
Hopper Lid
Juice glass strainer
03
17
05
06
07
08
01
Part Names
02
09
11
12
10 13

Page 10
Assembly for juicing
1. Insert the drum into the main body and turn the drum
counterclockwise until it is securely engaged.
3. Lock the drum set into position by turning the drum cap
counterclockwise (CLOSE).
21
2. Attach the auger and juicing screen to the assembled
drum. Insert the auger's shaft into the main body until it
is securely engaged. Make sure that the groove on the
juicing screen is facing upward.
31
3
2
Select the proper juicing screen.
Fine screen: Creates higher pressure, more yield, and less
pulp. Suitable for firm fruits and vegetables.
Coarse screen: Bigger holes are less likely to clog with soft or
fibrous produce. Suitable for berries, soft apples, pineapple,
and other soft fruits.

Page 11
31
Assembly for homogenizing
Assembly for homogenizing
The homogenizing screen doesn’t separate juice from pulp.
Instead it crushes and mixes ingredients together. Use it with
the juice cap closed.
1. Insert the drum into the main body and turn the drum
counterclockwise until it is securely engaged.
3. Lock the drum set into position by turning the drum cap
counterclockwise (CLOSE).
2
3
1
2. Attach the auger and homogenizing screen to the as-
sembled drum. Insert the auger's shaft into the main body
until it is securely engaged. Make sure that the groove on
the blank screen is facing upward.
2

Page 12
2 Operation instructions
Pulp outlet
Drum Cap Assem-
bly Guide Mark
Feed Chute
Power Dial

Page 13
Juicing
Use the fine screen for most produce. If juicing
soft produce like berries, pineapple, peaches,
softer apples, etc., use the coarse screen.
Place the juice glass under the juice outlet. Fully open
the juice cap. Place the pulp cup under the drum cap.
Smaller items will self-feed. Use the pusher for larger
items like carrots or firm apples.
Choose the speed according to the chart on page 20.
Insert a small amount of produce into the feeding tube.
Ensure that the juice cap is fully open. Keeping it closed
can cause juice to back up into the motor base.
Turn on the power dial.
1
54
2
6
3
Tip: If you prefer virtually pulp-free juice, place the
strainer on the juice glass before juicing.
coarse screen ne screen

Page 14
54 6
3
Use the homogenizing screen (the black screen
with no holes).
Place a container under the drum cap and close the
juicing cap.
Use the pusher if needed.Set the dial according to the chart on page 20.
Insert a small amount of ingredients at a time.
Homogenized ingredients come out of the pulp
outlet.
Turn on the power dial.
Homogenizing
1 2

Page 15
About the Power Dial and Auto-Reverse Option
Power Dial Operation
About the Auto Reverse System
1. Turn the dial clockwise to the recommended setting to start the juicer.
2. Turning the dial to STOP causes the motor to gradually stop to ensure safety.
3. Holding the dial in the REV position causes the motor to run backward
slowly. Use this setting to clear stuck or overfed ingredients only if the auto
reverse mechanism doesn’t engage.
1. If the juicer is overfed and jams, the auto reverse system will automati-
cally stop the motor and then run in reverse for a few seconds to clear the
jam. It will then begin juicing again at the previous speed setting.
2. If the jam doesn’t clear, the juicer will attempt the auto reverse setting
again. If the jam doesn’t clear after a few attempts, the juicer will automati-
cally shut o.
3. If the juicer shuts o after attempting to clear the jam, hold the power
dial in the REV position until the jam is clear.
1
2
3

Page 16
3 Cleaning/tips
Drum
Auger
Screen
Drum Cap

Page 17
1. Don’t touch the juicer or power cord if your hands are wet. It can cause damage to the juicer or an electric shock.
2. Wait for the motor to stop before removing the drum set. The motor turns off gradually for safety. Removing the drum set before the motor stops can damage it or
cause injury.
3. Clean the juicer immediately after use. If you wait, juice residue can dry and cause the juicing parts to get stuck and difficult to disassemble. This can cause a clogged
juicing screen.
4. Wipe the main body with a lightly damp towel or soft cloth. The juicer isn’t 100% waterproof, and water entering it can cause an electrical short or shock.
5. Do not clean the juicer with hot water or subject it to high temperatures. Do not clean it with abrasive cleaners, scrubby sponges, sharp tools, or dishwashing liquid.
Do not put any parts of the juicer in the dishwasher.
6. Make sure to completely dry the juicer and parts after using. Salts can cause corrosion of the stainless steel screens.
7. Use care not to cut yourself when cleaning or removing the blade in the drum cap.
Cleaning
Precautions When Cleaning
Wash the drum set in water, and wipe the main body with a well-squeezed
damp towel.
1. Close the juice cap to prevent drips, then remove the drum by pressing the
button and turning the drum clockwise.
2. Wash the drum cap, screen, auger, and drum under running water. Use the
cleaning brush on the juicing screen.
3. Wipe the main body with a lightly damp towel or soft cloth.
4. If needed, disassemble the drum cap for deeper cleaning.
누름정회전
역회전
작동스위치 정회전
역회전

Page 18
1
Disassembling the Drum Cap
Assembling the Drum Cap
1 2 3
Press the blade spindle with your finger.
Make sure the wider side of the drum cap gasket is
facing outward.
Remove the stopper, blade, and drum cap gasket.
Make sure not to lose the stopper.
Insert the blade spindle into the drum cap first.
Take care not to injure your fingers on the blade.
Clean the parts under running water and dry them
thoroughly before reassembly.
Place the blade stopper around the blade spindle
that is protruding from the drum cap. If you lose the
stopper, use the spare stopper attached to the bot-
tom of the main body.
32

Page 19
Notes:

Page 20
Juicing Settings Recommended for Dierent Ingredients
INGREDIENT
Berries
Soft apples
Pineapple
Peach
Firm apples
Carrot
Leafy greens / celery
Sorbet
Oil extraction
Orange
Tomato
Grapes
1 2 3 4
Almonds
(softened for almond milk)
Table of contents
Other Sana Juicer manuals