Sanus WSTV1 User manual

WSTV1 INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We’re ready to help!

2
Before getting started, let’s make sure this mount is perfect for you!
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
1 Does your TV weigh more than 60 lbs. (27.2 kg) including accessories?
No — Perfect!
Yes
— This mount is NOT compatible. Visit sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to find a compatible mount.
2 Do you have
the tools needed?
3 Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to
see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer
Service at 1-800-359-5520.
CAUTION: Avoid potential personal injuries and property damage! Manufacturer is not responsible for damage or injury caused by incorrect
assembly or use.
WARNING:Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to
make sure the combined weight of the WSTV1 and the display does not exceed 60 lbs (27.2 kg). Use with heavier televisions may result in instability
causing tip over resulting in death or serious injury!
WARNING: Use this mounting system only for its intended use as described in these instructions. Do not use attachments not recommended by
the manufacturer.
WARNING: Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed
on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over onto the child.
WARNING: Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment may result
in death or serious injury due to the furnishing collapsing or overturning onto a child.
NOTE: The WSTV1 can support screen sizes up to a maximum of 60" diagonal.
NOTE: The WSTV1 has no user serviceable parts.
60 lbs.
(27.2 kg)
Level Screwdriver

3
200mm
7.87 in.
100mm
3.94 in.
400mm
15.75 in.
75mm
2.95 in.
300mm
11.81 in.
600mm
23.62 in.
400mm
15.75 in.
300mm
11.81 in.
100
3.94 in.
200mm
7.87 in.
3deg ROLL
20deg 20deg
243.9mm
9.60 in.
5deg
UPTILT
519.7mm
20.46 in.
200mm
7.87 in.
HEIGHT
ADJUST
735.9mm
28.97 in.
685.8mm
27.00 in.
417.8mm
16.45 in.
TV INTERFACE
BASE PLATE
FULLY ASSEMBLED MOUNT
TOP VIEW - EXTENDED
TOP VIEW - RETRACTED
SIDE VIEW - EXTENDED
FRONT VIEW - HEIGHT ADJUST
3-D
Dimensions
in.
[mm]

4
11.75 in.
(300 mm)
7.87 in.
(200 mm)
15.75 in.
(400 mm)
17.13 in.
(435 mm)
19.69 in.
(500 mm)
23.62 in.
(600 mm)
25.36 in.
(644.16 mm)
4.00 in.
(100 mm)
4.00 in.
(100 mm)
7.87 in.
(200 mm)
11.81 in.
(300 mm)
15.75 in.
(400 mm)
Dimensions - TV Interface
in.
[mm]

5
M8 x 35mm
M
6
/
M
8
M
4
M4 x 12mm
M6 x 12mm M6 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 20mm
M8 x 16mm M8 x 25mm
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
STEP 1 Parts and Hardware
03 x4 04 x4
05 x4 08 x4
06 x4 09 x4
11 x4
12 x4
07 x4 10 x4 13 x4
01 x2
02 x4
TV Bracket
TV Screws
Washers
Spacers

6
10-32 x 3/8 in.
1/4-20 x 3/8 in.
1/4-20
STEP 3 Parts and Hardware
STEP 2 Parts and Hardware STEP 4 Parts and Hardware
15 x4
19 x4
21 x4
14 x1 16 x1
18 x1
17 x1
20 x1
Vertical Height Adjustment
Bracket
Swivel Head
Lock Screws
Neck Wrench
Base
Attachment Nuts
Interface Screws
for Vertical Height
Adjustment Bracket

7
M6M4 M8
1.1 Select TV Screw Diameter 1.2 Select TV Screw Length
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M4, M6, or M8) to use.
FLAT BACK ROUND BACK CABLESINSET HOLES
If your TV has a flat back AND you want your TV closer to the
swivel head of the mount, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
●Round/irregular back TVs
●TVs with inset mounting holes
●Extra space needed for cables
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection, contact
Customer Service at
1-800-359-5520.
CAUTION:
Verify adequate thread
engagement with your screw/
washer/spacer combination AND
TV bracket.
-Too short will not hold the TV.
-Too long will damage the TV.
STEP 1 Attach TV Brackets to TV
Too Short
Too Long
Correct

8
1.3 Attach Horizontal Brackets
Flat Back
Round Back / Extra Space
Position your TV brackets over your TV hole pattern - making sure the brackets are centered over the TV hole pattern and level. Secure brackets
using your screw/washer (Flat Back) or spacer/screw/washer (Round Back / Extra Space) selection (see 1.2 page 7).
IMPORTANT: Ensure TV brackets are securely fastened before moving on to the next step.
11
03
03
05 06 07
02
08 09
12
10
13
04
04
01

9
Make sure the vertical height adjustment bracket 14 is centered on the TV.
Secure vertical height adjustment bracket 14 with interface screws 15 .
IMPORTANT: Ensure all brackets are securely fastened before moving on to the next step.
STEP 2 Attach Vertical Bracket
01
14 15
UP

10
STEP 3 Attach Neck to Base
Attach neck 16 to base 17 with nuts 19 . Start by hand tightening the nuts 19 then complete the tightening by using supplied wrench 18 .
IMPORTANT: Ensure neck 16 is securely fastened to base 17 before moving on to the next step.
0
1/4-20
17 17
19
19
16 16
18

11
STEP 4 Swivel Head to Neck
2”
3”
1”
4”
5”
6”
7”
8”
9”
STEP 5 Attach TV to Swivel Head
1. Hang swivel head 20 onto neck 16 .
2. Secure with two lock screws 21 .
17
16
21
21
20
Highest Position
Lowest Position

12
STEP 5 Attach TV to Swivel Head (continued)
1. Determine the height from the base that you would like to hang your TV (see examples Page 11).
2. Secure the TV/bracket assembly to the swivel head 20 with the two lock screws 21 .
IMPORTANT: Keep the base clear while installing TV.
IMPORTANT: Ensure TV/bracket assembly is securely fastened to swivel head 20 before moving on to the next step.
20
21
21
21

13
Cable Management
Remove the cable cover CC . Route cables down the cable channel of the neck and through the opening in the base of the neck. Replace the
cable cover CC .
CC
CC

14
40°
20°
20°
±1.5°
Counterclockwise Clockwise
±1.5°
TV can be swiveled ±20° (40° total) for best viewing angle.Post install leveling can be adjusted ± 1.5 degrees using the
adjustment screw AS in the swivel head 20 .
Adjustments
AS

15
5°
TV can be tilted back 5°for a better viewing angle or to compensate for deflection caused by a heavy TV. To adjust tilt, loosen both
lock screws 21 , adjust tilt, then tighten both lock screws 21 .
21

Milestone AV Technologies and its aliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However,
Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in
connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy,
completeness or suciency of the information contained in this document.
©2016 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA 6901-002591 00
Thank you for choosing Sanus! Please take a moment to let us know how we did:
Call us: 1-800-359-5520
UK: 0800 056 2853
Email us: [email protected] Leave a review: sanus.com
Find us on Facebook: SANUS Follow us on Twitter @sanussystems
DRAFT COPY