Sapido BRD70n User manual

http://www.sapido.com.tw/ User Manual v1.0.0
1

http://www.sapido.com.tw/ User Manual v1.0.0
2
Table of Contents
Table of Contents........................................................................................................................2
FCC Caution ...............................................................................................................................5
Chapter 1 Introduction ........................................................................................................6
1.1 Hardware Features..............................................................................................6
1.2 Product Appearance...........................................................................................7
Chapter 2 Utility ..................................................................................................................8
Chapter 3 System and Network Setup.................................................................................9
3.1 Build Network Connection..................................................................................9
3.2 Connecting BRD70N ...........................................................................................9
3.3 Network setup.....................................................................................................9
3.3.1 Windows 2000.............................................................................................9
3.3.2 Windows XP..............................................................................................10
3.3.3 Windows Vista / Windows 7...................................................................... 11
3.4 Router IP Address Lookup................................................................................12
3.4.1 Log into Web GUI（Router mode）..........................................................13
Chapter 4 Internet Connection ..........................................................................................14
4.1 Using as a broadband router............................................................................15
4.2 Home button menu ...........................................................................................15
4.3 Internet Setup...................................................................................................17
4.3.1 PPPoE.......................................................................................................18
4.3.2 DHCP ........................................................................................................18
4.3.3 Static IP.....................................................................................................19
4.3.4 PPTP.........................................................................................................19
4.3.5 L2TP .........................................................................................................20
Chapter 5 GUI Function Setup...........................................................................................22
5.1 Wireless basi c setting AP ..................................................................................22
5.2 DDNS ................................................................................................................22
5.3 Firmware Upgrade ............................................................................................23
5.3.1 Auto upgrade............................................................................................23
5.3.2 Manual upgrade........................................................................................23
5.4 Time Zone.........................................................................................................23
5.5 DoS ...................................................................................................................24
5.6 Remote Management........................................................................................26
5.7 Status................................................................................................................26
5.8 Factory Default .................................................................................................27
5.9 Reboot ..............................................................................................................28
5.10 Logout ..............................................................................................................28

http://www.sapido.com.tw/ User Manual v1.0.0
3
Chapter 6 Advance Setup..................................................................................................29
6.1 Internet Mode....................................................................................................29
6.1.1 Internet Setup ...........................................................................................29
6.2 IP Config...........................................................................................................29
6.2.1 WAN..........................................................................................................29
6.2.1.1 PPPoE.......................................................................................................29
6.2.1.2 DHCP ........................................................................................................30
6.2.1.3 Static IP.....................................................................................................30
6.2.1.4 PPTP.........................................................................................................31
6.2.1.5 L2TP .........................................................................................................33
6.2.2 LAN...........................................................................................................33
6.2.3 DDNS ........................................................................................................35
6.3 IPv6 Config .......................................................................................................36
6.4 Wireless............................................................................................................37
6.4.1 Basic Settings...........................................................................................37
6.4.2 Advanced Settings....................................................................................39
6.4.3 Security ....................................................................................................40
6.4.4 Access Control .........................................................................................41
6.4.5 WPS..........................................................................................................41
6.5 Firewall.............................................................................................................42
6.5.1 DoS ...........................................................................................................42
6.6 System Management........................................................................................42
6.6.1 Change Password.....................................................................................43
6.6.2 Firmware Upgrade ....................................................................................43
6.6.3 Profiles Save.............................................................................................43
6.6.4 Remote Management................................................................................44
6.6.5 Time Zone.................................................................................................44
6.6.6 UpnP.........................................................................................................45
6.6.7 Route Setup..............................................................................................45
6.6.8 VPN Passthough.......................................................................................46
6.6.9 Wan Type Auto Detection..........................................................................47
Chapter 7 USB to Ethernet + Wireless AP .........................................................................48
7.1 Auto install........................................................................................................48
7.2 Access internet.................................................................................................48
7.3 If you want to manage BRD70n.........................................................................48
Chapter 8 Wireless dongle ................................................................................................49
8.1 Auto install........................................................................................................49
8.2 Configuring your wireless network (with WirelessUtility)................................49

http://www.sapido.com.tw/ User Manual v1.0.0
4
8.3 Configure GUI...................................................................................................54

http://www.sapido.com.tw/ User Manual v1.0.0
5
FCC Caution
FCC Part 15.19 Caution:
1. This device complies withPart15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmfulinterference and
(2) this device must accept any interference received, including interference that
may cause undesired operation
2. This device and its antenna(s) must not be co-located or operating inconjunction
withanyotherantennaor transmitter.
3. Changes or modifications to this unit not expresslyapproved by the party
responsible for compliance could void the user authorityto operate the equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This transmitter must not be co-located or operating in conjunction withany other
antennaortransmitter.
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm fromall persons and must not be co-located or operating in
conjunction withany other antenna or transmitter.
FCC Statement in User’s Manual (for calss B)
FCC Section 15.105
“Federal Communications Commission (FCC) Statement”
This equipment has beentested and found to complywith the limits for a lass B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference byone or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet ona circuit different from that to which the
receiver is connected.
-- Consult the dealer or anexperienced radio/TV technician for help.
CE Statement of Conformity
Our product has been tested in typical configuration by Ecom Sertech Corp and was found to
comply with the essential requirement of “Council Directive on the Approximation of the Laws
of the Member States relating to Electromagnetic Compatibility” (89/336/EEC; 92/31/EEC;
93/68/EEC)

http://www.sapido.com.tw/ User Manual v1.0.0
6
Chapter 1 Introduction
1.1 Hardware Features
Item
Specification
Key Components
Main Processor
Realtek RTL8196EU 400MHz Network Processor
Flash
8Mbytes Serial Flash
RAM
32Mbytes SDRAM
WirelessChip
Realtek RTL8188ER 1T1R single chip
Communication Interfaces
LAN Port
1 x 10/100Mbps RJ45 with auto MDI/MDIX
USB Port
1 x USB 2.0 OTG USB To Ethernet 10/100Mbps
Ethernet
Wireless
IEEE 802.11b/g/n 2.4GHz1T1R
Others
Wireless Antenna
Internal x1
Transmission Power
802.11b: 19±2dBm @ normal temp. range
802.11g: 16±2dBm @ normal temp. range
802.11n(20MHz/40MHz): 14±2dBm @ normal
temp. range
Receive Sensitivity
11Mbps : TYP. -83dBm @ 8% PER
54Mbps: TYP. -70dBm @ 10% PER
11n(20MHz): TYP. -64dBm @ 10% PER
11n(40MHz): TYP. -61dBm @ 10% PER
Button
Reboot/Reset button: push1 second for restart:
push10 seconds for resetting to system default.
WPS button: push for starting WPS process
Operation
Requirement
Operating Temp.: 0 to 40℃(32 to 104℉)
Storage Temp.: -20 to 70℃(-4 to 158℉)
Operating Humidity: 10% to 85% Non-Condensing
Storage Humidity: 5% to 90% Non-Condensing
Power Supply
PowerAdapter DC5V/0.5A
Dimensions
69 (L) x 26 (W) x 19.6 (H) mm

http://www.sapido.com.tw/ User Manual v1.0.0
7
1.2 ProductAppearance
LED Indicator Status Description:
LED
Function
Color
Status
Description
Power indicator Green On
Power is being applied to this
product
Wireless / WPS
activity
Green
On
Wireless is connected
Blinking
30ms
Wireless Tx/Rx activity
Reddish
Orange
Blinking
30ms
WPS function in progress
LAN port activity
Green
On
100Mbps Ethernet is connected
Blinking
30ms
100Mbps Ethernet Tx/Rx activity
Green
On
10Mbps Ethernet is connected
Blinking
120ms 10Mbps Ethernet Tx/Rx activity

http://www.sapido.com.tw/ User Manual v1.0.0
8
Chapter 2 Utility
BRD70n support driver and utility auto install
Auto install
Router mode
Install a new usb Ethernet NIC on PC
，
user
can manage BRD70n by this usb Ethernet NIC
USB to Ethernet
Install a new usb Ethernet NIC on PC
，
user
can access internet by it
USB to Wireless
Install a new usb wireless utility and driver on
PC
，
user can connect toAP by this utility

http://www.sapido.com.tw/ User Manual v1.0.0
9
Chapter 3 System and Network Setup
The BRD70N is an easy tosetup and wireless device for various application and environment,
especially for large installs such as hotels, offices space, warehouses, hot-spots and more.
To begin with BRD70N , you must have the following minimum system requirements. If your
system can’t correspond to the following requirements, you might get some unknown troubles
on your system.
Internet Account for XDSL/Cable Modem
One Ethernet (10/100mbps) network interface card.
TCP/IP and at least one web browser software installed (E.g.: Internet Explorer, Firefox,
Safari、Chrome latest version).
802.11b、g、n wireless adapter for wireless mobile clients.
Recommended OS: WinXP, Visata or Win7 / Linux.
3.1 Build Network Connection
Administrator can manage the settings for WAN, LAN, Wireless Network, NTP, password,
Firewall, etc.
Please confirm the network environment or the purpose before setting this product.
3.2 Connecting BRD70N
Prepare the followings before the connection:
PC or Notebook for setup
Ethernet cable
1. Make sure you are under “Router Mode”.
2. Connect BRD70N to xDSL/ Cable modem with the Ethernet cable.
3. Turn on your Computer.
3.3 Network setup
After the network connection is built, the next step is setup the router with proper network
parameters,so it can work properly in your network environment. Before you connect to the
wireless router and start configuration procedures, your computer must be able to get an IP
address from the wireless router automatically (use dynamic IP address). If it’s set to use
static IP address, or you’re unsure, please follow the below instructions to configure your
computer with dynamic IP address:
InsertBRD70ninto PC USB portand installutility/driver，after the utility and driver done，
you can get an IP address from BRD70n（router mode）
3.3.1 Windows 2000
Click “Start” button (it should be located at lower-left corner of your computer), then click
control panel. Double-click Network and Dial-up Connections icon, double click Local Area
Connection, and Local Area Connection Properties window will appear. Select “Internet
Protocol (TCP/IP)”, then click “Properties”.

http://www.sapido.com.tw/ User Manual v1.0.0
10
1. Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically”, then click “OK”.
3.3.2 Windows XP
1. Click “Start” button (it should be located at lower-left corner of your computer), then
click control panel. Double-click Network and Internet Connections icon, click Network
Connections, then double-click Local Area Connection, Local Area Connection Status
window will appear, and then click “Properties”.

http://www.sapido.com.tw/ User Manual v1.0.0
11
2. Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically”, then click “OK”.
3.3.3 Windows Vista / Windows 7
1. Click “Start” button (it should be located at lower-left corner of your computer), then
click control panel. Click View Network Status and Tasks, and then click Manage Network
Connections. Right-click LocalArea Network, then select “Properties”. Local Area
Connection Properties window will appear, select “Internet Protocol Version 4 (TCP / IPv4)”,
and then click “Properties”.

http://www.sapido.com.tw/ User Manual v1.0.0
12
2. Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically”, then click “OK”.
3.4 Router IP Address Lookup
After the IP address setup was completed, please clicks “start” → “run” at the bottom-lower
corner of your desktop:

http://www.sapido.com.tw/ User Manual v1.0.0
13
Input “cmd”, and then click “OK”.
Input “ipconfig”, then press “Enter” key. Please check the IP address followed by “Default
Gateway” (In this example, the gateway IP address of router is 192.168.1.1)
NOTE: If the IP address of Gatewayis notdisplayed,or the address followed by‘IPAddress’ begins with
“169.x.x.x”, please rechecknetwork connection between your computer and router,and / or go to the
beginning ofthis chapter,to recheck everystep ofnetwork setup procedure.
3.4.1 Log into Web GUI（Router mode）
After your computer obtained an IP address from wireless router, please start your web
browser, and input the IP address of the wireless router in address bar, and the following
message should be shown. Please click “admin” to login the BRD70N .

http://www.sapido.com.tw/ User Manual v1.0.0
14
Enter the User name and Password in to the blank and then Click Login. The default values
for User Name and Password are admin (all in lowercase letters).
Users canset or change user name and password used for accessing the web management
interface in this section.
Input User Name and New Password, then input Confirm Password again.
Chapter 4 Internet Connection
This Chapter describes how to setup BRD70N to the internet. The BRD70N is delivered with
the following factory default parameters.
Default IP address: 192.168.1.1
Default IP subnet mask: 255.255.255.0
Web login user name: admin
Web login password: admin

http://www.sapido.com.tw/ User Manual v1.0.0
15
4.1 Using as a broadband router
 Open a Web browser, and enter http://192.168.1.1 (Default Gateway) into the blank.
 Enter the User name and Password into the blank and then click Login. The default
values for User Name and Password are admin (all in lowercase letters).
4.2 Home button menu
Click Home button icon to enter MENU as below.
Download
pdadd
Status page
Logout

http://www.sapido.com.tw/ User Manual v1.0.0
16
Item
Description
Internet Setup
There are several different method to access Internet
，
PPPoE
、
DHCP、Static IP、PPTP、L2TP、WiFi ISP
WirelessBasic Settings
Do wireless basic configuration
：
SSID
、
encryption
DDNS
You can assign a fixed host and domain name to a dynamic
Internet IP address. Each time the router boots up, it will re-register
its domain-name-to-IP-address mapping with the DDNS service
provider.
Firmware Upgrade
This function allows you upgrade the BRC70X firmware to new
version. Please note do not power off the device during the upload
because it may crash the system.
Time Zone
You can maintain the system time by synchronizing with a public
time server over the Internet.
DoS
Denial of Service
Remote management
This page allows you to access the GUI on WAN.
Advance Setup
Advance setting menu
Status
You could check WAN, LAN, Client network in status.
Factory Default
You could reset the current configuration to factory default.
Reboot
This function is used to reboot
Logout
This page is used to logout.

http://www.sapido.com.tw/ User Manual v1.0.0
17
4.3 Internet Setup
Click Internet Setup iconto enter WAN setup as below. The Internet Setup is
depended on the service that you contract with the provider. The BRD70N provides five selections
for the Internet Mode type, PPPoE, DHCP, Static IP , PPTP and L2TP and HotSpot. Check
with your ISP if you don’t know the WAN type.

http://www.sapido.com.tw/ User Manual v1.0.0
18
4.3.1 PPPoE
Item
Description
User Name
Input your user name provided by your ISP. If you don’t know,
please check with your ISP.
Password
Input the password provided by your ISP.
Wireless AP
Turn on/off wireless
SSID
Service Set identifier, users can define to any or keep as default.
Encryption
Select wireless encryption type form the drop-down list.
4.3.2 DHCP
Item
Description
MAC type
Select "Universal” or “Specific"
Wireless AP
Turn on/off wireless
SSID
Service Set identifier, users can define to any or keep as default.
Encryption
Select wireless encryption type form the drop-down list.

http://www.sapido.com.tw/ User Manual v1.0.0
19
4.3.3 Static IP
Item
Description
IP Address
Enter the IP address which is provided by your ISP.
Subnet Mask
Please enter the Subnet Mask address
Gateway
Input ISP Default Gateway Address.
DNS
Input DNS information which is provided by your ISP
Wireless AP
Turn on/off wireless
SSID
Service Set identifier, users can define to any or keep as default.
Encryption
Select wireless encryption type form the drop-down list.
4.3.4 PPTP

http://www.sapido.com.tw/ User Manual v1.0.0
20
Item
Description
Address Mode
Select "Dynamic"or "Static"
IP Address
Input your IP address or domain name
Gateway
Input ISP Default Gateway Address.
Server IP Address
Input your server IP address provided by your ISP. If you don’t
know, please check with your ISP.
User Name
Input PPTP account provided by your ISP.
Password
Input the password provided by your ISP.
MTU Size
Maximum Transmission Unit. Usually provide by computer
operation systems (OS). Advanced users can set it manually.
Enable MPPE Encryption
Microsoft Point-to-Point Encryption (MPPE) provides data security
for the PPTP connection that is between the VPN client and VPN
server.
Enable MPPC Compression
Microsoft Point-to-Point Compression (MPPC) is a scheme used to
compress Point-to-Point Protocol (PPP) packets between Cisco
and Microsoft client devices. The MPPC algorithm is designed to
optimize bandwidth utilization in order to support multiple
simultaneous connections. The MPPC algorithm uses a
Lempel-Ziv (LZ) based algorithm with a continuous history buffer,
called a dictionar
Wireless AP
Turn on/off wireless
SSID
Service Set identifier, users can define to any or keep as default.
Encryption
Select wireless encryption type form the drop-down list.
4.3.5 L2TP