sauter TVL User manual

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.sauter.eu
Instruction Manual
Manual Crank Handle Test Stand
SAUTER TVL
Version 1.2
06/2016
GB
TVL-BA-e-1612
PROFESSIONAL MEASURING

2 TVL-BA-e-1612
GB
SAUTER TVL
Version 1.2 06/2016
Instruction Manual
Manual Crank Handle Test Stand
Thank you very much for buying this manual Crank Handle test stand of company
SAUTER. We hope you are pleased with your high quality test stand with its big
functional range. If you have any queries, wishes or helpful suggestions, do not hesi-
tate to call our service number.
Summarize:
1Scope of Delivery........................................................................................... 3
2Warning .......................................................................................................... 3
3Technical Specifications............................................................................... 3
4Installation of the force gauge...................................................................... 4
5Image with dimensions ................................................................................. 5

TVL -BA-e-1612 3
1 Scope of Delivery
- SAUTER TVL
- One hook
2 Warning
Incorrect performed force measurements can lead to serious injuries of persons and
material damages. For this reason force measurements with this test stand may only
be operated by trained and experienced staff.
Please avoid that forces are impacting from the test stand on the force gauge, which
are exceeding the max. force of the measuring instrument or which do not impact
directly from the test stand to the instrument.
3 Technical Specifications
Max. admissible capacity: 500 Newton
Measurement directions: vertically and horizontally:
Horizontal use of the test stand is enabled by allocating it onto the side.
Height adjustment is possible by four plate screws M6.
Crank handle operation by a spindle lifting of 3,1mm per rotation
Fixation height of upper hook above base plate: 460 mm
Max. travel (height of spindle): 297 mm starting from base plate
Height : 495 mm / Length : 235 mm / Depth: 150 mm
Proper weight: 8,6 kg

4 TVL-BA-e-1612
Length measuring unit (without serial interface): Scale length: 200 mm
Reading precision: 0,01 mm
Switches:
-ON/0: switch on
Zero position
- mm/In: switchover from millimeter to inch
- ▲: Manual pre-selection of length, upward
- ▼: manual pre-selection of length, downward
4 Installation of the force gauge
With four M 3 screws (included in delivery of the force gauges)

TVL -BA-e-1612 5
5 Image with dimensions
Dimensions (mm)
30
340
234
20
145
M6
Indication for
FH series,
50mm with
sensor inside
200mm (max.
open space)
M6
Ø 7
M6
113
152
73
30
38
48