Savic Caesar 3double User manual

assembly instructions
Caesar 3
double
#petslovesavic

A 1 plastic bottom tray
B 1 plastic tray with opening
C 2 lower side panels
D 1 lower back panel
E 1 lower front panel with door
F 1 upper roof panel
G 1 upper front panel with door
H 1 upper back panel
I 1 hay rack
J 1 upper feeding and drinking side panel
K 1 upper hay rack side panel
L 1 platform
M 4 vertical proles
N 1 wooden ladder
O 8 corner pieces
P 1 feeding bowl
Q 2 closing clips upper cage
R 2 closing clips lower cage
S 1 drinking bottle with holder
Check list
Before you start assembling your cage, please check if you have all the components. If any part is missing or
damaged, do not use your cage.
instruction video
A B
C D E
M
L
K
J
N I
H G F
P
O
Q
R
S
Attach on all profiles (m) 4 corner pieces (o).
1
ATTENTION
To avoid leakage, always fill bottle 100%.
Om lekken te vermijden, vul de fles altijd 100%.
Afin d’éviter des fuites, toujours remplir la bouteille 100%.
Um Tropfen zu vermeiden, Tränke immer 100% füllen.
Para evitar gotas, siempre llenar la botella 100%.
Rince spout with hot water before first use.
Voor eerste gebruik, buisje reinigen met warm water.
Avant premier usage, rincer la pipette à l’eau chaude.
Vor erster Verwendung, Röhrchen spülen mit heissem Wasser.
Antes de usarlo, limpiar el tubito con agua caliente.
M
O

4
5A
Place the lower back panel vertical on the tray. Slide the side panels with their profiles into the profiles of the back
panels. Make sure that all panels fit well into the corner pieces.
6A
Slide the lower front panel (e) into the grooves of the profiles and make sure the door is facing outwards.
Fix the remaining 4 corner pieces (o) on all 4 corners.
2A
Slide the lower back panel (d) into 2 profiles. Make sure the vertical wires of the back panel are facing outwards.
3A
Slide the 2 lower side panels (c) into the profiles. Again, make sure the vertical wires are facing outwards.
Attach the 2 lower closing clips (r) on the thick horizontal wire of the side panels.
7
2B
D
C
C
3C
E
O
5A
6B
7B
R

Attach the roof panel (f) on the back panel.
10
11A
Close the roof panel. Install the hay rack (i)in the side panel. Your upper cage has now been fully assembled.
12A
Place the plastic tray with opening (b) in the lower cage part. Install the wooden ladder (n) and place the platform (l) in
the corner of the tray.
8A
Now we install the upper cage. Take the front panel (g) and let it click into the feeding panel (j).
Make sure the door is facing outwards.
9A
Repeat this procedure for the back panel (h). Attach the other side panel (k).
Put the upper cage part on the plastic tray and fix the 2 closing clips (q) on the plastic side panels.
13
8B
J
G
CLICK
9B
H
K
F
PULL
11B
B
12B
L
N
Q

Finally, install the drinking bottle (s) and the feeding bowl (p) and your cage is now ready for use.
For US customers
Thank you for purchasing our Caesar 3 double cage.
This deluxe cage was designed and made in Belgium and sold through Lixit Corporation in Napa, CA
If you have any questions or need help please contact us at: E-mail: [email protected]
Call: 800-358-8254 Option 1 Oce hours: Monday -Friday 9-4 pst
P
S
www.savic.be
Ringlaan 10 • B-8501 Heule • Belgium
Tel. [phone] • Fax [phone]
[e-mail]
Doc.nr.: 931231