Savic Caesar User manual

assembly instructions
Caesar
knock down
www.savic.be
Ringlaan 10 • B-8501 Heule • Belgium
Tel. [phone] • Fax [phone]
[e-mail]
Doc.nr.: 931224

A1 plastic bottom tray
B1 roof panel
C1 front panel
D1 back panel
E1 platform
F1 side panel for hay rack
G1 side panel for feeding and drinking
H1 metal hay rack
I1 feeding bowl
J2 closing clips
K1 drinking bottle
L1 holder for drinking bottle
Check list
Before you start assembling your cage, please check if you have all the components. If any part is missing or
damaged, do not use your cage.
assembly video
A
BCD
E
L
K
J
I
H
G
F
ATTENTION
To avoid leakage, always fill bottle 100%.
Om lekken te vermijden, vul de fles altijd 100%.
Afin d’éviter des fuites, toujours remplir la bouteille 100%.
Um Tropfen zu vermeiden, Tränke immer 100% füllen.
Para evitar gotas, siempre llenar la botella 100%.
Rince spout with hot water before first use.
Voor eerste gebruik, buisje reinigen met warm water.
Avant premier usage, rincer la pipette à l’eau chaude.
Vor erster Verwendung, Röhrchen spülen mit heissem Wasser.
Antes de usarlo, limpiar el tubito con agua caliente.

1A
1) Take the front panel (c) and let it click into the side feeding & drinking panel (g).
Make sure the door is facing outwards.
2
2) Repeat this procedure for the back panel (d).
3) Now fix the other side panel for hay rack (f ).
4) Attach the roof panel (b) on the back panel and pull.
4
D
F
1B
3
B
G
C

5
5) Close the roof panel.
6) Install the hay rack (h) in the side panel. Your upper cage part is now fully assembled.
7
7) Install the platform (e) in the corner of the plastic tray (a).
8) Put the upper cage part on the tray. Install the feeding bowl (i), the drinking bottle (k) with holder (l) on the side panel
(g) and the 2 closing clips on both sides (f + g) and your cage is now ready for use.
6
E
A
8
H