Schick MT A User manual

Original Instructions
Schick GmbH

MT A
Project designation: MT A
Trade name: Schick MT A
Product name:
Serial number:
Model: MT A
Manufacturer:
Schick GmbH
Authorized
representative:
Schick GmbH
Lehenkreuzweg 12
Lehenkreuzweg 12
D-88433 Schemmerhofen
D-88433 Schemmerhofen
Tel. [phone]
Tel. [phone]
Fax [phone]
Fax [phone]
[e-mail]
[e-mail]
www.schick-dental.de
www.schick-dental.de
Revision date :

1 About this operating manual
3/23
Contents
1About this operating manual ..................................................................................... 6
1.1 General notes...............................................................................................................6
1.2 Related documentation.................................................................................................6
1.3 Signs and symbols used...............................................................................................6
1.4 Structure of warnings....................................................................................................7
2General safety regulations......................................................................................... 8
2.1 Principles......................................................................................................................8
2.2 Foreseeable misuse .....................................................................................................8
2.3 Selection and qualification of the personnel..................................................................8
2.4 Safety equipment..........................................................................................................8
2.5 Safety signs..................................................................................................................9
Explanation .......................................................................................... 9
2.6 Safety measures...........................................................................................................9
Personal protective equipment ............................................................ 9
2.7 Safety regulations.........................................................................................................9
General information.............................................................................. 9
During transport ................................................................................... 9
During operation................................................................................. 10
Care and control work........................................................................ 10
Maintenance and repair work............................................................. 10
Structural modifications...................................................................... 10
3List of contents......................................................................................................... 11
3.1 Optional Accessories..................................................................................................11
4Technical description............................................................................................... 11
4.1 Overview ....................................................................................................................11
Function description........................................................................... 11
4.2 Characteristics of the tools..........................................................................................12

1 About this operating manual
4/23
4.3 Name plate.................................................................................................................12
12
12
12
5Transport and storage.............................................................................................. 13
5.1 Transport....................................................................................................................13
Installation site requirements............................................................. 13
5.2 Storage.......................................................................................................................13
Storage site requirements.................................................................. 13
5.3 Installation ..................................................................................................................13
5.4 Charging.....................................................................................................................13
6User interface............................................................................................................ 14
6.1 Features.....................................................................................................................14
6.2 MT A switch on...........................................................................................................14
6.3 Operating the handpiece and controller......................................................................15
6.4 Displaying of additional information: ...........................................................................16
6.5 Tool change on handpiece..........................................................................................16
6.6 Changing the handpiece rotation direction..................................................................17
6.7 Separating the handpiece and battery ........................................................................17
6.8 Using the intermediate cables.....................................................................................17
6.9 MT A switch off...........................................................................................................18
7Troubleshooting ....................................................................................................... 19
7.1 Fault and error messages...........................................................................................19
8Care and control tasks for operators ...................................................................... 19
8.1 General informations ..................................................................................................19
8.2 Care and inspection plan............................................................................................19
8.3 Performing care and control work ..............................................................................20

1 About this operating manual
5/23
Dismantling and cleaning of the chuck .............................................. 20
9Technical data........................................................................................................... 21
10 Annex ........................................................................................................................ 22
10.1 Service adress............................................................................................................22
10.2 Declaration of Conformity ...........................................................................................23

1 About this operating manual
6/23






1 About this operating manual
7/23
Signal word
Use in case of ...
Possible conse-
quences if the safety
advice is not ob-
served:
DANGER
Personal injury
(imminent danger)
Death or severe injuries!
WARNING
Personal injury
(potentially hazardous
situation)
Death or severe injuries!
CAUTION
Personal injury
Slight or minor injuries!
Tab. 1.1 Warning levels




DANGER!
Type of danger (text)

General danger point
High voltage
Hand injuries
Warning levels
Warning signs

2 General safety regulations
8/23

2 General safety regulations
9/23

2 General safety regulations
10/23

3 List of contents
11/23

0
12/23

5 Transport and storage
13/23



6 User interface
14/23


6 User interface
15/23

6 User interface
16/23




6 User interface
17/23





6 User interface
18/23


7 Troubleshooting
19/23
Interval
Care and inspection tasks
Remarks
Weekly
Dismantle the tip and remove dirt
Do not use compressed air!
Once a month
Dismantle the chuck, clean and lubricate
Lubricate with Art.No. 51/1

8 Care and control tasks for operators
20/23