scigiene FI51P User manual

In
No
n
-
cont
a
ct
I
n
frared
The
r
momet
e
r
fu
n
ction
(IRT
Mode)
# The laser will automatically turns on while the Scan button is pressed.
Wh
i
le
s
c
ann
i
ng,
t
he
n
ewest
temperature
w
i
ll
b
e
upd
a
ted
o
n
t
h
e
LCD
and
t
h
e
m
easurement
will
continue
a
s
lo
n
g
a
s
the Meas.(infrared) key is depressed. When the Meas.(infrared) key is released, icon “Hold” will appear on the display
and the last measurement will remain visible for 15 seconds before the display goes blank.
CAUTION
1. WHEN DEVICE IS IN USE, DO NOT LOOK DIRECTLY INTO THE LASER BEAM–PERMANENT EYE
DAMAGE
MAY RESULT.
2. USE EXTREME CAUTION WHEN OPERATING THE LASER.
3. NEVER POINT THE DEVICE TOWARDS ANYONE’S EYES.
4. KEEP OUT OF REACH OF ALL CHILDREN.
Mode
Selection
MIN

MAX

LOCK

o
C/
o
F

E
M
IS
MINIMUM
O
R
MA
X
I
M
UM
M
O
DE
The thermometer will display the minimum or maximum reading during the measurement period only until the M
ode
key is pressed.
To utilize the minimum mode, please press Meas.(infrared) key Mode key Meas.(infrared) key. And k
eep
pressing Meas.(infrared) key for measurement.
To utilize the maximum mode, please press Meas.(infrared) key Mode key *twiceMeas.(infrared) key. And k
eep
pressing Meas.(infrared) key for measurement.
LOCK
MODE
The lock mode is particularly useful for continuous monitoring of temperatures. The thermometer will continuously
display the temperature for up to 60 minutes or until the Meas.(infrared) key button is pressed.
To utilize the lock mode, please press Meas.(infrared) key Mode key *three timesMeas.(infrared) key.
o
C OR
o
F MODE
To change the ‘oC’ or ‘oF’ mode, please press Meas.(infrared) key Mode key *four timesMeas.(infrared) key.
Same steps can be taken when switching from oF to oC.
EMISSI
V
ITY
The infrared thermometer is supplied with a default emissivity of 0.95. The emissivity can be changed from 0.10 (10E)
to 1 (100E). Changes should only be carried out by experienced personnel. For information relating to the emissivity
of specific materials, please contact the nearest retailer. Note: non-contact infrared thermometers are not
recommended for use in measuring the temperature of shiny or polished metals.
To change the emissivity, please Meas.(infrared) key Mode key *five timesMeas.(infrared) key for each 0.01
(1E) adjustmentMode key.
In
Co
n
tact
T
hermoc
o
uple
P
r
obe
f
u
nct
i
on
(
COT
M
ode)
Co
nnect the thermocouple with Thermocouple socket and put the probe in/on the target. Press Scan key to
continuo
usly display the temperature for up to 4 minutes. After that the device will automatically shut off to extend the
battery l
ife. Press Scan key will interrupt the scanning to display the last temperature with a 'Hold' wording. To reenter
s
canning just press Scan key again.
After measure high temp, the probe may remain HOT for a while.
The measure range is for thermometer only. User should choose proper probe types for different kinds
of application. Please make sure the target to be measured will not exceed the temperature range of
the probe to avoid permanent damage of the thermocouple probe.
To avoid electric shock and thermometer damage, do not measure live circuit where voltage exceeding
24V AC RMS or 60V DC with the thermocouple probe.
S
TO
R
A
GE
&
C
LEANI
N
G
It should be stored at room temperature. The sensor lens is the most delicate part of the thermometer. The lens
should be kept clean at all times, care should be taken when cleaning the lens using only a soft cloth or cotton swab
with water or medical alcohol, allowing the lens to fully dry before using the thermometer. Do not submerge any part
of the thermometer.
LCD
ERROR
MESSA
G
ES
The thermometer incorporates visual diagnostic messages as follo
ws:
‘H
i
’
or
’
Lo’
is
d
is
p
layed
when
t
he
t
emper
a
ture
b
e
ing
measured
is
ou
t
side
of
t
h
e
「
」
「
」
measurement range.
view
Emis
s
ivity
= 0.1~1 Ste
p
.01
Distance:
S
pot (FOV)=
1
2:1
S
i
mply
aim
the
thermometer
at
t
he
m
easure
t
arget
wi
t
h
“
Infr
a
red
Lens”
and
press Meas.(infrared) key to display the surface temperature. The distance
Wave Length = 8um-14um to target ratio is 12:1.Please make sure the target size is within the field
of
HACCP
check
The
“HACCP CHECK” feature is incorporated in our thermometer
te
mperature to graphically indicate critical temperature zone. The icons
and
LED indicators located above the display indicate a food product
stays
in a safe or unsafe HACCP “ Danger Zone” temperature. The
gr
een and red LED light will always be lit before power off.
A
Green LED appears with icon ” ” indicates a safe cool or frozen
condition
below 4
o
C(40
o
F) or appears with icon ” ” indicates a safe
holdi
ng temperature above 60
o
C(140
o
F).
Wh
en temperature is between 4
o
C and 60
o
C, the red LED with icon ”
” will appear and indicate that the temperature is fallen within the HACCP “Danger Zone” from 4
o
C to 60
o
C
(40
~140
o
F).
FI51P
Thermom
e
ter
Operating
Instru
c
tions
The thermometer is a non-contact infrared thermometer, also with Probe thermometer. You can
select only one Mode at the same time but can change the Mode at will. Please remember to keep
away from baby and children and don’t use it for safety related applications.

‘Er2’
is
d
isplayed
when
t
h
e
t
hermo
m
eter
is
e
x
posed
to
rapid
c
han
g
es
in
the
ambient temperature. ‘Er3’ is displayed when the ambient temperature exceeds
「 」「 」
0
o
C (32
o
F) or +50
o
C (122
o
F). The thermometer should be allowed plenty of time
(mi
n
imum 30 min
u
tes) to
st
a
bilize to
the
wo
r
k
i
ng/room
t
emperature.
「
」
For
all
o
ther
error
mes
s
ages
it
is
ne
c
e
s
sary
to
reset
t
he
thermomete
r
.
T
o
r
eset
it,
waiting
f
or
auto
power off, remove the battery and wait for a minimum of one minute, reinsert the battery and turn
on. If the error message remains please contact the Service Department for further assistance.
B
A
TTERIES
The thermometer incorporates visual low battery indication as follows:
‘Battery OK’:
mea
s
urements
are possible
‘Ba
t
tery Low
’
: bat
t
ery needs to be
replaced, measuremen
ts are possible
‘Ba
t
tery Exhausted’:
measurements are not possible
Wh
e
n the ‘Low Batte
r
y’
i
con indica
t
es the battery is lo
w
,
t
he batte
r
y should be
r
eplaced i
m
mediately wi
t
h
AAA,
1.5V batteries. Please note: It is important to turn the instrument off before replacing the battery otherwise the
thermometer may malfunction.
Dispose
of used battery promptly and keep away from children.
In
f
rared Scan function
(IRT Mode)
-
55
~
250°C
(
-
6
7
~4
82°
F
)
0~50
°
C (32~122°F)
+/
-
1°C
at
0~65°C
+/
-
1
°C
o
r
1
%
of the reading, whiche
v
er
i
s greater
-
33~
0
°C:
+/
-
(
1°C+0.1/deg
r
ee)
0~ 65°C: +/-1°C
65~250°C: +/-1.5% of r
eading
Fixed
at 0.97
0.2
°
C/0.5°
F
,
o
the
r
wise 1°C
/
1°F
12:1
17
5
.2 x
3
9.0
x
71.9m
m
(
6.
9
×
1.54×
2
.83 inch)
179 grams(6
.31 oz) inclu
d
ing
batter
i
es (
A
AA*2p
c
s)
T
yp.18, min 14 hours continuous u
s
e (
A
lkaline, with Laser)
SPECIFIC
A
TION
Thermoco
u
ple Probe
Scan fun
c
tion for
(K type; probe not included.)
Measurement Range
-55~330°C (-67 to +626
o
F)
Oper
a
ting
R
ange
Ac
c
uracy
(
Tobj=15-35°C, Tamb=25°C)
Ac
c
uracy
(
Tamb=23+/-
3°C)
Em
i
s
s
ivity Ra
n
ge
Resolu
t
ion (
-
9.9
~1
99.9
°
C/°
F
)
Distance
:
Spot
Di
m
e
n
s
i
on
W
e
i
ght (with batter
y
)
Bat
t
ery Life
EMC/RFI
Readings may be affected if the unit is operated within a radio frequency ele
ctromagnetic field strength of
approximately 3 volts per meter, but the performance of the instrument will not be permanently affected.