Scolmore ESP Aperta A1IPDSM1 User manual

A1IPDSM1
Quick Start Guide
The latest product manuals and software is available online:
https://www.espuk.com/technical_support
REV: D23
Aperta IP PoE Multi Way Outdoor Station IP65 HD
with Proximity Reader

1. Installation
Connect the Door Station to a switch/network or alternatively directly to a Monitor using the RJ45 port.
If the connected network does not support PoE, then DC12V1A needs to be applied to the 12V & GND
terminals.
*All system cabling has been tested with Cat5E UTP PVC Cable.
**Maximum distance of 100m to PoE switch is supported.
485A
485B
GND
12V
NO12V+
NC
COM
NO
CTL
DET
GND
IP/PoE connection
Fail Secure Lock (+)
Video Door Station Lock Connections
Exit button
Sensor
Ground

2. Addressing the Apartment Outdoor Station
1. Enter administration mode:
When in standby, press #to enter the password entry screen, then type in the Administation
Passcode, and then press #.
2. When Address is selected press #to enter. If address is not selected, use the 4and 6keys to navigate
the menu.
3. Once in the “Address” menu, press “#” to edit the address of the Outdoor Station.
A. When editing the address the field will be highlighted, use to delete a number, once all 4 digits
are entered press #.
I. If it is the first Outdoor Station set to address to “0101”
II. If there are more than 1 Outdoor Station(s) the address can be any value between 0102 ~
0104
4. Press to exit the Adminstration mode.
Note:
Default Admin Passcode is 666666.
A maximum of 4 Apartment Outdoor Stations per buildings are available, contact ESP Technical for further information.
3. Public PIN Code
1. Enter administration mode:
When in standby, press #to enter the password entry screen, then type in the Administation
Passcode, and then press #.
2. Setting the Public Unlock PIN:
Once in Administration Mode select “Unlock PWD” by using the 4and 6keys to navigate the menus,
and then press #to enter the menu.
3. You will then need to enter the Administation Passcode, and then the new public unlock passcode twice.
And then press # to confirm and exit the menu.
4. Press to exit the Adminstration mode.
Note:
Default Admin Passcode is 666666. The public unlock password must not be a identical if reversed.
Public PIN code must be 6 digits

Contact Details
Elite Security Products UK, Unit 7 Target Park, Shawbank Road, Lakeside, Redditch, Worcestershire, B98 8YN
Tel: [phone] Fax: [phone] Email: [email protected]
Registered in England, Company Registration Number: 02769392, VAT Registration: GB614686525
For more product information please visit www.espuk.com E&OE - Errors and Omissions Excepted. D23
3. Adding User Fob/Cards.
1. Enter administration mode:
When in standby, press #to enter the password entry screen, then type in the Administation
Passcode, and then press #.
2. Managing the Card/Fobs:
Once in Administration Mode select “Card Manage” by using the 4and 6keys to navigate the menus,
and then press #to enter the menu.
3. You will then need to enter the “Add Card” menu, by pressing 0 and #.
4. You will then need to type in the address of the apartment that the card/fob will be assigned to, and
press “#”.
5. You need to only enter 4 digits (Room) address of the monitor the fob is being assigned to.
For example “0001Room.01Ext” you only need to enter “0001”.
6. And then present each card/fob(s) in order to add them to that address, when all have been added press
“#”
7. Press to exit the Adminstration mode.
Note: Default Admin Passcode is 666666. The public unlock password must not be a identical if reversed.
Only 13.56 MHz Fob/Cards are supported.