Scosche BASELYNX 2.0 VERT User manual

Vertical Multi-Device
Charging Station
ELEMENTS
Vertical Multi-Device Charging Station
• Vertically stores iPads and other devices during charging
Protective End Cap
with Integrated AC Power Cord
Protective End Cap
USB-C to USB-C Cable (1 ft.)
SETUP
Place the power cord end cap
on the charger module.
Place the other end cap
on the charger module.
Plug the power cord into a wall socket.
Place tablets, phones, small laptops, or other
devices in the padded bars on the 3-port charging
station. Connect using an appropriate USB cable.
60W power shared between all ports.
Output depends on number of ports used (see insets).
port =
ports = each port
ports = each port
2.0 VERT BASELYNX™
Vertical Multi-Device
Charging Station
INCLUDED ELEMENTS
A. Vertical Multi-Device Charging Station
• Vertically stores iPads and other devices during charging
B. Protective End Cap
with Integrated AC Power Cord
C. Protective End Cap
D. USB-C to USB-C Cable (1 ft.)
BA
C
D
DEVICE SETUP
2
1. Place the power cord end cap
on the charger module.
2. Place the other end cap
on the charger module.
3. Plug the power cord into a wall socket.
4. Place tablets, phones, small laptops, or other
devices in the padded bars on the 3-port charging
station. Connect using an appropriate USB cable.
Note: 60W power shared between all ports.
Output depends on number of ports used (see insets).
13
4
1port = 60W
2ports = 30W each port
3ports = 20W each port

BASELYNX POINT SYSTEM
If you decide to expand your charging station
with more BaseLynx 2.0 modules just follow the
simple point system to safely build your ultimate charging station.
Each BaseLynx module has a predetermined point value as shown
in the chart below. To ensure safe and dependable operation do
not exceed 15 points.
(Note: The BaseLynx 2.0 Vert is 5 points)
For questions regarding different conguration options and other
product support, contact Scosche Customer Service at
[phone] ext. 1 or [email protected].
BaseLynx 2.0
Vert
BaseLynx 2.0
2-in-1 Stand
BaseLynx 2.0
Watch
BaseLynx 2.0
End Cap
LYNX POINT SYSTEM
If you decide to expand your charging station
with more BaseLynx 2.0 modules just follow the
simple point system to safely build your ultimate charging station.
Each BaseLynx module has a predetermined point value as shown
in the chart below. To ensure safe and dependable operation do
not exceed 15 points.
( The BaseLynx 2.0 Vert is 5 points)
For questions regarding different conguration options and other
product support, contact Scosche Customer Service at
or .
• If the device’s battery is fully discharged it may take a few minutes for it to show that it is charging.
• Devices and BaseLynx 2.0 modules may get warm during charging. This is completely normal, and they will gradually cool down after they are fully charged.
• Charging time may vary based on the device’s battery capacity, charge level, the condition of the battery and the temperature in the surrounding area.
• To clean your BaseLynx, disconnect it from power and wipe with a slightly damp cloth.
• For indoor use in dry locations only.
• Children should be supervised when using this product.
• Do not operate if any part of product appears to be damaged.
• Do not attempt to service. Opening housings will expose you to dangerous voltage and risk of electrical shock.
AC Input: 100-240V~50/60Hz, 2.5A AC Output: 100-240V~50/60Hz, 1.5A
USB-C Output (per port): 5V 3A, 15W / 9V 3A,27W / 12V 3A, 36W / 15V 3A, 45W / 20V 3.35A, 60W/
PPS 1: 3.3-16V 3A max., 45W max. / PPS 2: 3.3-21V 3A max., 60W max.
Total Output: 60W max.
Scosche Industries
1550 Pacic Avenue
Oxnard, California 93033
Phone: [phone] x1 / 805-486-4450 x1
©2023 Scosche Industries
Scosche & BaseLynx are trademarks of Scosche Industries.
Other marks or brands are the property of their respective owners.
Devices and or appearance may vary.
SI 11/23
NOTES
• If the device’s battery is fully discharged it may take a few minutes for it to show that it is charging.
• Devices and BaseLynx 2.0 modules may get warm during charging. This is completely normal, and they will gradually cool down after they are fully charged.
• Charging time may vary based on the device’s battery capacity, charge level, the condition of the battery and the temperature in the surrounding area.
• To clean your BaseLynx, disconnect it from power and wipe with a slightly damp cloth.
WARNINGS
• For indoor use in dry locations only.
• Children should be supervised when using this product.
• Do not operate if any part of product appears to be damaged.
• Do not attempt to service. Opening housings will expose you to dangerous voltage and risk of electrical shock.
SPECIFICATIONS
AC Input: 100-240V~50/60Hz, 2.5A AC Output: 100-240V~50/60Hz, 1.5A
USB-C Output (per port): 5V 3A, 15W / 9V 3A, 27W / 12V 3A,36W / 15V 3A, 45W / 20V 3.35A, 60W/
PPS 1: 3.3-16V 3A max., 45W max. / PPS 2: 3.3-21V 3A max., 60W max.
Total Output: 60W max.
Scosche Industries
1550 Pacic Avenue
Oxnard, California 93033
Phone: [phone] x1 / 805-486-4450 x1
www.scosche.com
©2023 Scosche Industries
Scosche & BaseLynx are trademarks of Scosche Industries.
Other marks or brands are the property of their respective owners.
Devices and or appearance may vary.
Designed in Oxnard, California
SI BL2MDPUKW-AP0 11/23