
GUN CABINET
MODEL NO: SKGS3, SKGS5, SKGS8
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! These gun cabinets are heavy and care should be exercised in transit and handling to ensure that no one is injured.
WARNING! The gun cabinets are a 2 person job for transit and installation.
9 Formaximumsecurity,theseguncabinetsmustbesecurelyxedtoawalloroor.
9 Ensurethatifsecuredtothewall,thecabinetisonarmlevelsurface.
8DO NOTinstallinareaswheredampandcondensationarepresent.
WARNING!Thewarnings,cautionsandinstructionsreferredtointhisinstructionmanualcannotcoverallpossibleconditionsand
situationsthatmayoccur.Itmustbeunderstoodthatcommonsenseandcautionarefactorswhichcannotbebuiltintothisproduct,
but must be applied by the operator.
2. INTRODUCTION
Heavy-dutyguncabinetswithpowdercoatedpaintfinishtopreventcorrosion.Eachcabinetdoorisevenlylockedbyfive25mmlockingbolts,
onetop,onebottomandthreealongtheside.Eachcabinetincludesasetofsecuringboltswithrearandbottomholesforfixingtothewalland
floor.Sidewallsandfloorarecarpetedtoprotectgunsfromdamagewhenputtingawayortakingoutofthecabinet.SKGSSeriesincludetwo
largekeysforlockingthemaindoorandtwosmallkeysforlockingtheinternalammosafe.Eachguncabinetismanufacturedinaccordance
withBS7558:1992.
3. SPECIFICATION
Model No: .................................................................. SKGS3
External Dimensions (W x D x H):.........250x250x1450mm
Gun Capacity: ............................................ 3(Max.1260mm)
Internal Dimensions (W x D x H):..........245x175x1260mm
Nett Weight: ..............................................................36.62Kg
Model No: .................................................................. SKGS5
External Dimensions (W x D x H):.........350x340x1450mm
Gun Capacity: ............................................ 5(Max.1260mm)
Internal Dimensions (W x D x H):..........345x270x1260mm
Nett Weight: ..............................................................50.93Kg
Model No: .................................................................. SKGS8
External Dimensions (W x D x H):.........490x360x1450mm
Gun Capacity: ............................................ 8(Max.1260mm)
Internal Dimensions (W x D x H):..........485x290x1260mm
Nett Weight: ..............................................................64.24Kg
4. INSTALLATION
4.1. Consideration should be given to the placing of the gun cabinet to ensure
thatitisplacedinadiscreetlocationandwillnotbeeasilyfoundby
intruders.
4.2. Eachguncabinetissuppliedwitha set of anchor bolts suitable for fixing to
brickandconcrete.
4.3. Fixingtohollowpartitionwallsisnotrecommended.Iffixedtowooditmust
betoasolidwoodenstructure.
4.4. Open the door of the gun cabinet (see 5.1 for opening instructions) and
withthehelpofasecondperson,positionitwhererequiredandmarkthe
mountingpositionsthroughthepre-drilledholesinthebackorbaseofthe
gun cabinet.
4.5. Drill12mmholestoadepthof67mm(fig.1.1)andinserttheanchorsleeve
and nut withboltandwasherremoved(fig.1.2).
4.6. Positiontheguncabinetovertheanchorholes.Placeawasheroverthe
anchorboltandinsertintosleevethroughtheguncabinet,screwintonut
andtightentosecure.(fig.1.3).
SKGS3SKGS5SKGS8Issue3(HF)08/05/18
Original Language Version
©JackSealeyLimited
Refer to
instructions
g.1
SKGS3 SKGS8
SKGS5