Unpack the lift and check contents with list below. Should there be any damaged or missing parts contact your supplier immediately.
Content
WARNING! Keep your hands away from moving parts.
Numbers in brackets refer to item numbers in the parts diagram.
3.1. Assembly
3.1.3.
edal to minimise the
risk of accidental lowering.
3.2. Before first use
Note:
completely first time and a second purge will be required.
3.2.2. to
400KG HYDRAULIC MOTORCYCLE LIFT
MC401
1. SAFETY INSTRUCTIONS
2. SPECIFICATION
lift in good condition (use an authorised service agent).
Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
Use a qualified person to lubricate and maintain the lift. DO NOT use brake fluid to top up hydraulic unit.
ere is adequate lighting.
nough (preferably concrete) to take the weight of the lift and the bike. DO NOT operate the lift on
Keep the lift clean for best and safest performance.
DO NOT
Keep children and unauthorised persons away from the work area.
DO NOT use the lift for a task it is not designed to perform.
DO NOT operate the lift if it is damaged.
DO NOT
DO NOT
DO NOT allow untrained persons to operate the lift.
DO NOT
DO NOT make any modifications to the lift and DO NOT
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
3. ASSEMBLY
Specification
. . . . . . . . . . . . . . . . . . . . . . .
................
...............
Original Language Version
