
TRANSMISSION & ENGINE OIL
FILLING SYSTEM
MODEL NO: VS7009.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure health & safety, local authority, and general workshop practice regulations are strictly adhered to when using this
equipment.
9 Familiariseyourselfwithproductapplicationandlimitations,aswellasthespecicpotentialhazardspeculiartothisproduct.
9Maintain the product in good condition (use an authorised service agent).
9Replace or repair damaged parts. Use genuine parts only. Non authorised parts will invalidate the warranty.
9Use only to pump oils up to SAE 140 viscosity.
9Ensure safety eye protection and protective clothing are worn when using this product.
9Keep the work area clean, uncluttered and ensure there is adequate lighting.
9 Maintaincorrectbalanceandfooting.Ensuretheoorisnotslipperyandwearnonslipshoes.
9Keep children and unauthorised persons away from the working area.
9Dispose of waste liquids in accordance with local authority regulations.
8DO NOT usetoextractcorrosiveuids.
8DO NOT dismantle, tamper with or adapt the pump for any purpose other than for which it is designed.
8DO NOT use the unit if it has been dropped or mishandled, check the unit to ensure there is no damage.
9Keep the pump clean and store in a safe, dry, childproof location.
WARNING! DO NOT allowuncontrolleddischargeofuidsthuspollutingtheenvironment.
2. INTRODUCTION
Manually operated oil dispensing unit manufactured from composite materials. Large visual measurement will identify amount dispensed.
Suppliedwitharangeofveautomatictransmissionuidadaptors.Deliversapproximately70mlperstroke.Featuresauidcontrolvalveand
adaptorstowagetominimizeoilleakagewhennotinuse.
3. SPECIFICATION
Model no .............................................................. VS7009.V2
Capacity............................................................................. 7lt
Hose length.................................................................... 1.5m
4. CONTENTS
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
Wear protective
clothing
Item Part no. Description
1 VS7009.A01 Adaptor Ford
2VS7009.A02 Adaptor universal
3 VS7009.A05 Adaptor VW Audi
4 VS7009.A04 Adaptor VW Audi
5 VS7009.A03 Adaptor VW Audi
Accessories
Part no. Description
VS70091 Transmissionoillleradaptor-VAGM30x1.5mm
VS70092 Transmissionoillleradaptor-Toyota/LexusM18x1.5mm
VS70093 Transmissionoillleradaptor-VWPassat/Tiguan
VS70090 3pc Transmission oil adaptor set
VS7009.V2|Issue:112/08/19