SEASIDE CASUAL FURNITURE Salem 042 User manual

1
Tools Required:
Phillip's Head Screwdriver
4MM Allen Wrench (Included)
(042,059) 48In & 60In Salem Dining Tables rev. C
WOOD ENVIRO
SEASIDE CASUAL FURNITURE
Hardware:
(16) 3” Hex 1/4” Lags
(10) 3/4” Pan Head Screws
(59 Only) (18) 3/4” Pan Head
Screws
(1) Table Top Assembly
Parts List:
Assembly Instructions
Step One: Set Up
READ ENTIRE INSTRUCTIONS BEFORE BEGINNING! Carefully remove contents
from box. Make sure that all parts and hardware are included.
Place Leg Stretcher in between both Leg Assemblies.
Align pre-drilled holes on Leg Stretcher to Leg Assem-
blies. Attach using (2) 3” Hex 1/4” Lags (Left Picture).
Repeat process on all sides.
Step Two: Leg Stretcher Assembly
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Step Three: Apron Assembly
Attach Short Apron to Long Apron using (4) 3”
Hex 1/4” Lags (Left Picture).
(2) Leg Assemblies
(2) Leg Stretchers
(2) Long Aprons
(2) Short Aprons
Instruction Revision: C

2
Step Four: Base Assembly
Step Five: Final Assembly
Lift Base Assembly and place square on to table top. Align
Apron ends and sides to the center of the table top. Attach ta-
ble top to the base using (10) 3/4” pan head screws.
(59 Only) use (18) 3/4” pan head screws.
Place Apron Assembly on to the Leg Assembly and secure
using (4) 3“ Hex 1/4” Lags (Right Picture).