Seaside Casual MAD 271 User manual

Page 1
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [e-mail]
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
are included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Table Top Assembly
x 1
Leg Assembly
x 2
Part Code: 4MMALLEN
4mm Allen Wrench
x 1
MAD Tables
(271 40” x 85” Dining)
(272 40” x 85” Balcony)
(273 40” x 85” Bar)
(274 40” Dining)
(275 40” Balcony)
(276 40” Bar)
(277 33” Dining)
(278 33” Balcony)
(279 33” Bar)
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver;
Rubber Mallet
Tools Required:
Part Code: 316-8X3/4PPDS
3/4” Phillips Pan Head Screw
x 12
Actual Size
Part Code: 316-8X1-3/4PFDS
1-3/4” Phillips Head Screw
x 8
Actual Size
80mm Hex Lag
Part Code: 316-1/4-10-80HL
Actual Size
Leg Stretchers
5/8” Bung
Actual Size
x 32
x 2
Angle Braces
x 2
Part Code: 316-8X3/4PTS
Cross Stretchers
x 4
x 4
271, 272, 273, 275, 276, 278, 279
274, 277
271, 272, 273
x 16
x 8
274, 277
275, 276, 278, 279
271, 272, 273
271, 272, 273
271, 272, 273
x 32
x 16
x 8
274, 277
275, 276, 278, 279
271, 272, 273

Page 2
2ATTACH STRETCHERS TO LEG
ASSEMBLIES
Attach Leg Stretchers to Leg As-
semblies using 80mm Hex Lags as
shown. Plug holes with 5/8”
Bungs using Rubber Mallet.
Flip over Base assembly on to Table
Top Assembly. Center Base on Ta-
ble Top. Secure Aluminum Support
Braces to Table top using (12) 3/4”
Phillips Pan Head Screws.
Attach Angle Braces to Table Top
and Cross Stretchers using (8)
1-3/4” Phillips Head Screws.
3ATTACH BASE ASSEMBLY TO
TABLE TOP ASSEMBLY
5ATTACH ANGLE BRACES
(271, 272, 273)
Attach Cross Stretchers to Leg
Stretchers using (16) 80mm Hex
Lags. Plug holes with 5/8” Bungs
using Rubber Mallet.
4ATTACH CROSS STRETCHERS
TO LEG STRETCHERS (271, 272, 273)