Seaside Casual 600 User manual

Page 1
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [e-mail]
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware are in-
cluded using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
TOP
x 1
90mm Bolt
LEG
x 4
Actual Size
4mm ALLEN WRENCH
x 1
Greenwich Table
600
x 4
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver; Socket set
(Recommended: Rubber Mallet; Power Drill)
Tools Required:
Actual Size
1/4 LOCK WASHER 1/4 FLAT WASHER
x 8x 8
Actual Size
3/8” HEX LAG
x 8
Actual Size
x 8
1/4-20 NUT
5/8” TAPS
x 8

Page 2
2ATTACH TOP TO LEGS
On a clean flat surface connect legs to Top using (2) 90mm Bolts, Washers, split
washers, and nut (AS SHOWN). Finger tighten. Attach 3/8” LAG to inside of leg.
Repeat with remaining legs. Do not over tighten. Plug holes with supplied 5/8”
TAPS.