Seaside Casual MAD Adirondack Chair 280 User manual

Page 1
REV A
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [e-mail]
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
are included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Part Code: 316-1/4-20-50B
50mm Connector Bolt
Part Code: 4MMALLEN
4mm Allen Wrench
Part Code: 316-8X1-3/4PFDS
1-3/4” Phillips Head Screw
Back Assembly
x 1
Seat Assembly
1” Phillips Pan Head Screw
x 1
x 1x 1 x 1
x 6 x 4
Part Code: 316-1/4-20-1PPMS
x 8
MAD Adirondack Chair
(280)
Right & Left Arm Assemblies
Front Leg Assemblies
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver;
#3 Phillips Head Screwdriver.
Tools Required:
Actual Size Actual Size
Actual Size
Actual Size

Page 2
REV A
2ATTACH LEGS TO SEAT
ASSEMBLY
Align Front Leg Assemblies with Seat
Assembly. Secure using (8) 50 mm Con-
necter Bolts thru threaded inserts in
Legs using a 4mm Allen wrench.
Attach front apron of Seat Assembly to
Front Legs with (2) 1-3/4” Phillips Head
Screws as shown using a #2 Phillips
head screwdriver.
Align Back
Assembly as
shown. Se-
cure using (4)
1” Phillips
Pan Head
Screws from
upper yoke
into Arms using a #3 Phillips head
screwdriver, and (4) 1-3/4” Phillips
Head Screws from seat support into
lower yoke using a #2 Phillips head
screwdriver.
3ATTACH SEAT APRON TO
LEGS
5ATTACH BACK ASSEMBLY
Align threaded insert in front of Arm As-
semblies with hanger bolt in front legs.
Spin clockwise until aligned and tight.
4ATTACH ARMS TO FRONT
LEGS