Seaside Casual 221 User manual

Page 1
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [e-mail]
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
are included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Table Top Assembly
x 1
Leg Assembly
x 2
Part Code: 4MMALLEN
4mm Allen Wrench
x 1
25” x 50” SYM Pub Table
(221)
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver;
Rubber Mallet
Tools Required:
Part Code: 316-8X3/4PPDS
3/4” Phillips Pan Head Screw
x 16
Actual Size
Part Code: 316-8X1-3/4PFDS
1-3/4” Phillips Head Screw
x 24
Actual Size
80mm Hex Lag
Part Code: 316-1/4-10-80HL
Actual Size
Aluminum Support Brace
x 2
x 2
Upper Stretchers
Lower Stretcher Assembly
5/8” Bung
x 4
Actual Size
x 8
x 1
50mm Hex Lag
Part Code: 316-1/4-10-50HL
Actual Size
x 6
Part Code: 316-8X3/4PTS

Page 2
2ATTACH STRETCHERS TO LEG
ASSEMBLIES
Attach Upper
Stretchers and
Stretcher Assem-
bly to Leg As-
semblies using
(8) 80mm Hex
Lags as shown. Plug lower holes only
with 5/8” Bungs using Rubber Mallet.
Align predrilled
holes in Legs with
holes in Aluminum
Support Braces as
shown. Secure using
(6) 50mm Hex Lags.
Attach Upper
Stretchers to Ta-
ble top using (16)
1-3/4” Phillips
Head Screws.
3ATTACH ALUMINUM SUPPORT
BRACES TO LEG ASSEMBLIES
5ATTACH BASE ASSEMBLY TO
TABLE TOP ASSEMBLY
Secure Upper and Lower Stretchers using (8)
1-3/4” Phillips Head Screws through pock-
ets in bottom of Stretchers into Legs.
ATTACH REAR STRETCHER
TO REAR LEGS
6SECURE STRETCHERS
Flip over Base
assembly on
to Table Top
A s s e m b l y .
Secure Alumi-
num Support Braces to Table top using
(16) 3/4” Phillips Pan Head Screws.
4ATTACH BASE ASSEMBLY TO
TABLE TOP ASSEMBLY