Seaside Casual Portsmouth User manual

Page 1
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [e-mail]
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
are included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Table Top Assembly
x 1
Leg Assembly
x 2
Part Code: 4MMALLEN
4mm Allen Wrench
x 1
42” Portsmouth Table
(049 Dining)
(067 Balcony)
(051 Bar)
x 2
Long Apron
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver;
Rubber Mallet
Tools Required:
Part Code: 316-8X3/4PPDS
3/4” Phillips Pan Head Screw
x 20
Actual Size
Part Code: 316-8X1-3/4PFDS
1-3/4” Phillips Head Screw
x 8
Actual Size
80mm Hex Lag
x 20
Part Code: 316-1/4-10-80HL
Actual Size
Aluminum Support Brace
x 2
x 2
Short Apron
Leg Stretcher
5/8” Bung
x 16
Actual Size
Bar Height
x 12
Dining and Balcony x 20
Bar Height
x 12
Dining and Balcony
x 4
Bar Height
x 2
Dining and Balcony

Page 2
2ATTACH STRETCHERS TO LEG
ASSEMBLIES
Attach Stretchers to
Leg Assemblies us-
ing (8) 80mm Hex
Lags (16 for Bar
Height) as shown.
Plug holes with 5/8”
Bungs using Rubber
Mallet.
Align predrilled
holes in Short
Aprons with
holes in Alumi-
num Support
Brace as shown. Secure using (8) 1 3/4”
Phillips Head Screws.
Flip over Base
Assembly and
align Aluminum
with cleats on
the Table Top
Assembly. Se-
cure using (12) 3/4” Pan Head Screws.
3ATTACH SHORT APRONS TO
ALUMINUM SUPPORT BRACE
5ATTACH BASE ASSEMBLY TO
TABLE TOP ASSEMBLY
Align Long Aprons with Aluminum Support
Brace. Ensure that pockets in Long Apron are
aligned with Screws used to attach Short
Aprons. Secure using (8) 3/4” Pan Head
Screws thru Aluminum Support Brace.
ATTACH REAR STRETCHER
TO REAR LEGS
6ATTACH LONG APRONS.
Align large holes
in Aluminum Sup-
port Braces with
Predrilled holes on
outside corners of
Legs as shown. Se-
cure using (4)
80mm Hex Lags.
4ATTACH ALUMINUM SUPPORT
TO BASE ASSEMBLY