Seaside Casual Portsmouth 30" Table User manual

Page 1
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [e-mail]
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
are included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Table Top Assembly
x 1
Leg Assembly
x 2
Part Code: 4MMALLEN
4mm Allen Wrench
x 1
Portsmouth 30” Table
(Dining 055)
(Balcony 080)
(Bar 057)
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver;
Rubber Mallet
Tools Required:
Part Code: 316-8X1-1/4PFDS
1-1/4” Phillips Head Screw
x 48
Actual Size
80mm Hex Lag
Part Code: 316-1/4-10-80HL
Actual Size
Long Apron Assembly
x 2
x 2
Short Apron
Leg Stretcher
x 4
5/8” Bung
x 16
Actual Size
Actual Size
x 2
Dining and Balcony Bar Height
x 24x 16
Dining and Balcony Bar Height

Page 2
2ATTACH STRETCHERS TO LEG
ASSEMBLIES
Attach Stretchers to Leg Assemblies us-
ing (8) 80mm Hex Lags (16 for Bar
Height) as shown. Plug holes with 5/8”
Bungs using Rubber Mallet.
Align slots in long apron assembly with
short apron. Secure using (8) 1-1/4”
Phillips Head Screws through pilot holes
in short aprons.
Flip over Base Assembly and align cleats
on apron assembly with table top cleats.
Secure using (40) 1-1/4” Phillips Head
Screws.
3ATTACH SHORT APRONS TO
LONG APRON ASSEMBLY
5ATTACH BASE ASSEMBLY TO
TABLE TOP ASSEMBLY
Align counter-bored holes in long apron
assembly with Predrilled holes on Legs
as shown. Secure using (8) 80mm Hex
Lags.
4ATTACH APRON ASSEMBLY TO
BASE ASSEMBLY