2Quick Start Guide
Please refer to the following to start using the product right away:
1. Before first time use, charge the FirePRO 300 using the supplied charging dock for
3.5 hours or until the charge screen indicates full battery.
2. Push the Power button to turn the camera on. The camera will start imaging within 7
seconds.
3. Aim the front of the camera lens toward the scene of interest.
4. To change modes; press and hold the Mode/Flashlight button for 3 seconds. The
modes will cycle through in the following order: TI Basic, TI Basic+, Survey. A mode
icon indicator will appear in the bottom left of the screen for TI Basic+ and Survey
mode. Please refer to the Camera Modes section for detailed descriptions.
5. To turn flashlight on/off; press and release the Mode/Flashlight button.
6. To capture images; press and release the Media Capture button. To capture video;
press and hold the Media Capture button for 2 seconds. A red recording icon will
appear in the bottom left of the screen. Press the Media Capture once to turn off
video recording.
7. To transfer image and video files, connect the dock to a Windows or MAC computer.
8. To change the temperature units between Fahrenheit and Celsius, insert the tip of a
pen into the pin hole situated between the Power button and Mode/Flashlight button.
