Seek Thermal RevealPRO User manual

Benefits of Registration:
By sharing your name,
email, and serial number,
you enable us to send you
product updates and tips
and techniques. We can
also expedite your warranty
inquiries by knowing when
and where you purchased.
Country information helps
us to provide better local
product support.
Welcome to RevealPRO. Let's take a few minutes to quickly
walk through the basics and learn how to use your device.
RevealPRO User Manual
Registration
Changing your Registration:
Go to thermal.com and login
to make changes to your user
account.
To read our data policy visit:
www.thermal.com/datapolicy
Menu
Quickly access common settings from the dropdown menu.
View captured images.
Change the thermal imaging mode.
Zoom in up to 4x.
Toggle reticle on or off.
Adjust emissivity.
Access more settings and features.
Press the
Up
button to
capture images. Hold to
capture multiple images.
Capture
Filters
Explore the various
filters– from standard
grayscale to spectra
high contrast.
Set Date and Time:
Set date, time and language
on first startup.
Use buttons to navigate through menus.
Turn on the 300 Lumen
LED flashlight.
Up
Down
Select
Zoom
Press and hold the
Down
button to zoom. You can
also set the zoom factor
manually in settings.
Navigation
Visit thermal.com/register to register your product
to activate full warranty and service options.
The left two buttons have a
quick navigation dropdown
when selected.

Settings
Emissivity is a material property that defines how
much IR light is emitted from a particular surface.
Calibrate for emissivity through four pre-defined
settings to ensure accurate temperature readings
and reporting.
Thermal Span and Level
Individually adjust Span
and Level range to meet
your requirements. Choose
reset to return to the
default range.
Modes
Default mode that maximizes
thermal image consistency using
auto exposure control.
Displays all temperature data for
maximum clarity.
Allows you to set and lock a
temperature range to display the
maximum thermal information of
any object or scene.
Change the thermal imaging mode.
View captured images.
Control zoom, watermark and banner
settings.
Adjust units (°C,°F,K), emissivity and reticle.
Set date and time, language,
auto power off, and flashlight settings.
Access device serial#, firmware version
and registration information.
Warranty
thermal.com/warranty
support.thermal.com
Support
Email: [e-mail]
Phone: 1 (844) SEE-HEAT
North America:
Email: [e-mail]
Phone: [phone]
Europe:
Reticle
Enable the reticle for
precise spot temperature
readings.
Emissivity Control
Optional, more advanced modes, that display all temperature data for maximum clarity.
Current emissivity (ε)
setting is visible in the
lower banner.
To fully reset back to factory settings,
choose Device then Restore.