SEI LANGSTON User manual

HO904600TX-BLACK/
HO914600TX-WHITE/
HO924600TX-ESPRESSO
"LANGSTON" DESK
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
Max top load 40 lb.

HO904600TX-BLACK
HO914600TX-WHITE/HO924600TX-ESPRESSO
"LANGSTON" DESK
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage. Before beginning assembly,
separate each type of screw. Carefully study the screw diagrams below. You may
receive extra hardware with your unit.
A
Wood Top
B
Left Side Panel
C
Central panel
D
Right Side panel
E
Second Shelf
F
Bottom Shelf
G
Acorss Panel
Top Stretcher
H
Short Stretcher
I
Long Stretcher
Quantity
Of 1
Quantity
Of 1
Quantity
Of1
Quantity
Of1
Quantity
Of 2
Quantity
Of 1
Quantity
Of 1
Quantity
Of 3
Quantity
Of 4
Quantity
Of 1

1
Bolts 1/4”x 45mm
2
Barrel Nuts 1/4”
3
Screw 4 x 32mm
4
Dowel 8 x30 mm
5
Wrench 1/4”
6 Quantity
Of 12
Bolts 1/4” x 32mm
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
The finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
Assembly Tool Required
No.2 phillips screw diver
Quantity
Of 8
Quantity
Of 10
Quantity
Of 10
Quantity
Of 20
Quantity
Of 1

HO904600TX-BLACK/
HO914600TX-WHITE/HO924600TX-ESPRESSO
"LANGSTON" DESK
Assembly Instruction
Step 1: Put all parts on a
soft surface to prevent
scratches ,
Attach top stretcher (G) to
wood top (A) by using bolts
(6) and dowel (4) as shown.
Step 2: Attach short
stretcher (H) to top shelf (F)
by using screw (3) and
dowel (4) as shown.

Step 3: Attach short
stretcher (H) to bottom
shelf (E) by using screw
(3) and dowel (4) as
shown.
Step 4: Insert barrel nut
(2) into short stretcher
(H) and keep the hole
of barrel nut (2) to be
horizontal when
assembly.
Then attach left side
panel (B) to shelves (E)
& (F) by using bolts (1),
dowel (4) and barrel nut
(2) as shown.