SELVAS Healthcare ACCUNIQ BC300 User manual

English. 06/2021. V3.01
User Manual BC300

The device bears the CE label in accordance with the provisions of Medical Device Directive 93/42/EEC.
THE PERSONS RESPONSIBLE FOR PLACING DEVICES ON THE EC MARKET UNDER MDD 93/42/EEC
SELVAS Healthcare, Inc.
155, Sinseong-ro, Yuseong-gu, Daejeon, 34109 Republic of Korea
TEL: [phone], FAX: [phone]
Obelis s.a.
Bd. Général Wahis 53.
B-1030 Brussels, Belgium.

CONTENTS_3
CONTENTS
CONTENTS 3
INTRODUCTION 5
INTENDED USE .......................................................................... 5
WORD DEFINITIONS............................................................... 5
CLASSIFICATION AND COMPLIANCE ............................. 6
SAFETY PRECAUTIONS........................................................... 6
SAFETY SYMBOLS AND INFORMATION........................ 9
Guidance for Electromagnetic compatibility
(EMC)............................................................................................11
ABOUT BODY COMPOSITION 13
Body Composition........................................................13
Obesity ...............................................................................13
Necessity of Body Composition Analysis..........13
Waist to hip ratio ..........................................................13
Abdominal Fatness .......................................................14
Segmental Analysis ......................................................14
Age Matched of Body.................................................14
TERM AND FUNCTION OF EACH PART 15
Main Body..................................................................................15
Front Part ..........................................................................15
Rear Part............................................................................16
Base Part............................................................................17
Bottom of the head part...........................................18
Key Pad ..............................................................................19
Basic Package ...........................................................................20
Options........................................................................................21
INSTALLATION 23
Installation of product .........................................................23
Power Supply............................................................................25
Peripheral Device Installation ...........................................26
Connecting Computer ................................................26
Connecting Printer .......................................................26
Connecting Blood Pressure Monitor ...................27
Replacing of thermal paper (Option)..................28
SYSTEM SETUP 30
Entering SYSTEM SETUP .....................................................30
Menu in SYSTEM SETUP .....................................................30
Selecting a Menu in SYSTEM SETUP ............................31
Exiting SYSTEM SETUP.........................................................31
Moving to SYSTEM SETUP.................................................31
Setup ............................................................................................32
DATE/TIME........................................................................32
VOLUME.............................................................................33
PRINT ..................................................................................33
PRINT POSITION............................................................34
CLOTHES............................................................................35
ABDOMINAL FATNESS................................................35
DATE TYPE ........................................................................36
THERMAL PRINT............................................................37
Communication..............................................................37
ID usage ............................................................................38
Abdominal Circumference ........................................39
GUIDE..................................................................................40
CHILD/ADULT/AUTO....................................................40
HEIGHT METER...............................................................41
MEASUREMENT AND ANALYSIS 43
Precautions for Measurement..........................................43
Correct Posture........................................................................44
How to Touch Plate Electrodes ..............................44

SELVAS Healthcare
4_CONTENTS
How to Touch Handle Electrodes..........................44
Measuring Posture........................................................45
Measuring Procedure ...........................................................45
Basic Analysis ..................................................................46
Result screen ...................................................................50
Printing the results and Restarting ......................50
Analysis Using Blood Pressure Monitor/Software
Program .............................................................................51
STORAGE OF DATA USING USB
MEMORY 53
Storage of data........................................................................53
Select of FLASH MEMORY........................................53
Select of USB MEMORY.............................................53
ID Search (Only with FLASH MEMORY) ......................54
Data Deletion (Only with FLASH MEMORY) .............54
Data Backup (Only with FLASH MEMORY)................55
RESULT INTERPRETATION 56
STORAGE & MAINTENANCE 60
ERROR & REPAIR 62
Kinds of Error & Repair .......................................................62
Error & Repair ..........................................................................63
AFTER SERVICE 64
AFTER SERVICE ........................................................................64
PACKING AND TRANSPORT..............................................64
SPECIFICATION 66
WARRANTY 68

User Manual BC300
INTRODUCTION_5
INTRODUCTION
We highly appreciate that you chose our company’s product.
You are kindly requested to be familiar with these directions before using this product and always keep it
together with the product. In case you are not sure about any directions or problems arising while using
the product, please contact our service center.
We will provide you with detailed instructions.
INTENDED USE
This device measures impedance by bioelectrical impedance analysis method and provides lots of
information using measured impedance and inputted personal data (height, age, gender, weight).
It shows body composition of MBF, LBM, SLM, TBW, protein mass, mineral mass, etc. and information to
BMI, PBF, BMR, abdominal analysis, AMB, segmental analysis, control guide, etc.
Intended application location is professional healthcare facility environments, not home healthcare
environment.
WORD DEFINITIONS
To ensure safe operation and long term performance stability, it is essential that you fully understand the
functions, operating and maintenance instructions by reading this manual before operating your unit.
Particular attention must be paid to all warnings, cautions and notes incorporated herein.
The following conventions are used throughout the manual to denote information of special emphasis.
Warning
"Warning" indicates important information to the presence of a hazard which may cause
severe personal injury, death of substantial property damage if the warning is ignored.
Caution
"Caution" indicates important information to the presence of a hazard which may cause
minor personal injury or property damage if the caution is ignored.

SELVAS Healthcare, Inc.
6_INTRODUCTION
Note
"Notice" indicates important information to notify installation, operation or maintenance
of this device. "Notice" is important but not hazard-related. Hazard warnings are not
included here.
CLASSIFICATION AND COMPLIANCE
1) This device is classified as;
Class 1 type-BF against electric shock
Ordinary equipment without protection against ingress of water
Equipment not suitable for use in presence of a flammable anesthetic mixture by standard of IEC
60601-1:2005/A1:2012(Basic safety and essential performance of Medical Electrical Equipment)
2) This device is complied with Class A for Noise-Emission, Level B for Noise-immunity, by standard of
IEC 60601-1-2:2014(Electromagnetic Compatibility Requirements).
SAFETY PRECAUTIONS
This device is designed and manufactured with consideration of safety of the operator and subject and
also to the reliability of the unit.
The following precautions must be observed for additional safety;
Warning
The unit must be operated only by, or under supervision of a qualified person with our
company or our distributors.
Warning
This device is specified as Class 1 type BF unit under the standard of IEC 60601-
1:2005/A1:2012 (Basic safety and essential performance of Medical Electrical Equipment).
Therefore, patients must not touch or handle inner side of the system at any time.
Prohibition
Do not modify the unit. If any modification is needed, ask our company or its authorized
dealer for service.

User Manual BC300
INTRODUCTION_7
Prohibition
The unit has previously been adjusted in the factory for optimum performance.
Do not attempt to adjust switches or any other things except those specified in this
manual for operation.
Caution
If you have experienced any trouble with the unit, switch it off immediately, and contact
our company or its authorized dealer for assistance.
Caution
If you plan to connect any device of other manufacturers electrically or mechanically to
the unit, contact our company or its authorized dealer for instructions before doing so.
When you connect computer or other system to the unit (RS-232C), the attached systems
should be those certified by IEC 950 or equivalent standards for data processing
equipment.
Configurations shall comply with the system standard IEC 60601-1:2005/A1:2012.
Everybody who connects additional equipment to the signal input part or signal output
part configures a medical system standard EN IEC 60601-1:2005/A1:2012.
If in doubt, consult the A/S department of local distributor.
Caution
Avoid the following environments for storage;
Where the ambient temperature falls -25°C or exceeds 70°C.
Where the atmospheric pressure falls below 70kPa (700mbar) or exceeds 106kPa
(1060mbar).
Where the humidity is over 93% non-condensing.
Where the unit is exposed to spray or splashing water.
Where the unit is exposed to dust.
Where the unit is exposed to water vapor.
Where the unit is exposed to salty atmosphere.
Where the unit is exposed to explosive gas.
Where the unit is exposed to excessive shocks or vibrations.
Where the angle of inclination of mounting surface exceeds 10 degrees.
Where the unit is exposed to direct sunlight.

SELVAS Healthcare, Inc.
8_INTRODUCTION
Note
This equipment has been tested and found to comply with the limits for medical devices
to the IEC 60601-1-2:2014. These limits are designed to provide reasonable protection
against harmful interference in a typical medical installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to other devices in the vicinity.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to other devices, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving device.
Increase the separation between the equipment.
Connect the equipment into an outlet on a circuit different from that to which the
other device(s) are connected.
Consult the manufacturer or field service technician for help.
Prohibition
Do not to touch signal input, signal output or other connectors, and the patient
simultaneously.
Note
A statement that MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding
EMC and needs to be installed and put into service according to the EMC information
provided in the ACCOMPANYING DOCUMENTS;
Note
A statement that portable and mobile RF communications equipment can affect MEDICAL
ELECTRICAL EQUIPMENT.
Note
Please consult a physician or a trained health professional for interpretation of
measurement results.
Caution
Measurements may be impaired if this device is used near televisions, microwave ovens,
X-ray equipment or other devices with strong electrical fields. To prevent such
interference, use the meter at a sufficient distance from such devices or turn them off.

User Manual BC300
INTRODUCTION_9
Note
Incorrect operation or failure of user to maintain the unit spares the manufacturer or his
agent of the responsibility for system’s non-compliance with specifications or
responsibility for any damage or injury.
This manual is made for informational purpose and this manual and product are not
meant to be a substitute for the advice provided by your own physician or other medical
problem. You should not use the information contained in the product for diagnosis or
treatment of health problem or prescription of medication by yourself.
If you have or suspect that you have a medical problem, consult with your physician
promptly.
Defective unit or accessories must be packed in the replacement cartons to be shipped
off from you to our company.
Shipping and insurance costs for return of defective unit must be prepaid by the users.
Note
The equipment shall be connected to a center tapped single phase supply circuit when
users in the United States connect the equipment to a 240 V supply system.
SAFETY SYMBOLS AND INFORMATION
The International Electrotechnical Commission (IEC) has established a set of symbols for medical electrical
equipment which classifies a connection or warning of any potential hazard.
The classifications and symbols are shown below. Save these instructions for your safety.
SYMBOL
INFORMATION
Degree of protection against electric shock: TYPE BF
Please observe operating instructions
General warning sign
General prohibition sign

SELVAS Healthcare, Inc.
10_INTRODUCTION
SYMBOL
INFORMATION
General mandatory action sign
Caution
Waste Electrical and Electronic Equipment (WEEE)
The device could be sent back to the manufacturer for recycling or proper disposal
after their useful lives. Alternatively the device shall be disposed in accordance
with national laws after their useful lives.
/
"ON / OFF" key : Turn the power ON / OFF
Class II equipment
This symbol is used inside system.
Identifies the point where the safety ground of the system is fastened to the
chassis.
Do not open. This is for factory only.
Alternating current
Direct current
Date of manufacture
Manufacturer
Non-ionizing radiation
CE mark

User Manual BC300
INTRODUCTION_11
SYMBOL
INFORMATION
Serial No.
Authorized representative in the European community.
Keep dry
This way up
Fragile
Use no hooks
For indoor use only
RoHS2
Guidance for Electromagnetic compatibility (EMC)
Details about the electromagnetic compatibility (EMC) of the ACCUNIQ BC300 are given below. Before
using the ACCUNIQ BC300, be sure to read and understand the following information.
1) Guidance and manufacturer’s declaration –electromagnetic emissions
The ACCUNIQ BC300 is intended for use in the electromagnetic environment specified IEC 60601-1-
2:2014 (Fourth Edition).
2) Guidance and manufacturer’s declaration –electromagnetic immunity
The ACCUNIQ BC300 is intended for use in the electromagnetic environment specified IEC 60601-1-
2:2014 (Fourth Edition).
3) Guidance and manufacturer’s declaration –electromagnetic immunity 2
The ACCUNIQ BC300 is intended for use in the electromagnetic environment specified IEC 60601-1-
2:2014 (Fourth Edition).
4) Recommended separation distances between portable and mobile RF communications equipment and
the ACCUNIQ BC300

SELVAS Healthcare, Inc.
12_INTRODUCTION
The ACCUNIQ BC300 is intended for use in the electromagnetic environment specified IEC 60601-1-
2:2014 (Fourth Edition).

User Manual BC300
ABOUT BODY COMPOSITION_13
ABOUT BODY COMPOSITION
Body Composition
Human body consists of body fat and lean body. Lean body means non-fat constituents of human body
like body water, muscles, bones, etc.
Body water is divided into intra- and extra-cellular water and the ratio between them is controlled and
maintained within a certain range. Body fat is piled beneath the skin and between abdominal organs. Body
fat is hydrolyzed to make energy needed to normal physiological function when energy supply through
food intake is not sufficient, but excessive fat in the body itself is a kind of disease and causes lifestyle
diseases.
Healthy people maintain the balance of body composition in a steady proportion but unhealthy people
persons fail to keep this balance. When the balance in body composition is broken, diseases like obesity,
malnutrition, osteoporosis, etc. can be caused.
Obesity
Various methods can be used to assess obesity but the key factor in obesity assessment is the amount of
fat accumulated in the body.
In general, obesity is defined as the state of not only excessive weight compared with height (visible obese)
but also excessive body fat compared with weight (invisible or visible obese).
Strictly speaking obesity is the state that body fat occupies considerably high ratio to weight.
Necessity of Body Composition Analysis
Body Composition Analysis is a good indicator to find possible health problems. Body composition analysis
enables professionals to find obesity or imbalance in body composition at early stage and helps subjects
keep their body healthy. Body composition analyzer is a useful preventive diagnostic device.
Waist to hip ratio
Waist to hip ratio (W.H.R.) shows the distribution of fat stored in one’s abdomen and hip. It is simple but
useful to assess body fat distribution. Body fat is stored in two distinct ways. They are often called 'apple'
and 'pear' type. Apple type shows bigger girth of waist than hip and pear type has bigger girth of hip
than waist. If body fat in abdomen increases more, the risk to cardiovascular diseases, diabetes, etc.
becomes higher.

SELVAS Healthcare, Inc.
14_ABOUT BODY COMPOSITION
Abdominal Fatness
Body fat is divided into subcutaneous fat and visceral fat. Visceral obesity is considered to be a critical risk
factor along with Percent of body fat.
Lipoprotein lipase can be easily activated in visceral fat, and it cause visceral fat to be dissolved easily.
Dissolved visceral fat goes into liver through the vessel and it cause fatty liver or increasing lipid in the
blood. It also elevates the risk of hyperinsulinemia, hypertension, and cardiovascular disease.
Visceral fat generally occupies 10 ~ 20 % of body fat, and visceral obesity is assessed based on the
indicators below.
the cross sectional fat area between L4 ~ L5 is 100 cm2and over
the visceral fat to subcutaneous fat ratio is 0.4 and over
the waist to hip ratio (W.H.R.) is over 0.9 (male) / 0.85 (female)
the circumference of waist is over 102 cm (male) / 88 cm (female)
Visceral fat increases after their 30s in men and after Menopause in women. It is more common in men
than women and the old than the young. Visceral fat tends to increase with aging. Because the combustion
rate per minute of visceral fat is higher than that of subcutaneous fat, visceral fat can be easily reduced
by exercise or dietary control in case of abdominal obesity. W.H.R. is the ratio of waist to hip circumference
and has relation to one’s figure.
Segmental Analysis
This device analyzes soft lean mass of five body parts; trunk, right arm, left arm, right leg, and left leg.
This function can be used as an assessment tool to evaluate the result of exercise or rehabilitation treatment.
Age Matched of Body
It is the estimated physical age of the subject considering body composition analysis result, gender, and
biological age. This is calculated by comparing the optimal body composition based on the gender and
biological age of the subject with the actual analyzed body composition. It can be used to evaluate the
subject’s health and body development.

User Manual BC300
TERM AND FUNCTION OF EACH PART_15
TERM AND FUNCTION OF EACH PART
Main Body
Front Part
Color LCD screen : It displays the procedure and results.
Handle Electrode : Handle Electrode measure the impedance by sending harmless electric current to
the body. Hold them with the hands during measurement.
Key pad : Key pad consist of numeric buttons from 0 to 9, alphabet, ‘ ’, ‘ ’, ‘ ’, ‘’, 'CE', '◀', '▶
', 'BACK', and 'NEXT'.
Thermal Printer (Option) : Thermal printer allows the speedy and convenient printing.
Handle Electrode
Thermal printer
(option)
Key Pad
Color LCD

SELVAS Healthcare, Inc.
16_TERM AND FUNCTION OF EACH PART
Rear Part
Blood pressure monitor (RS-232C) port: Connecting blood pressure monitor (OPTION) by SELVAS
Healthcare, Inc.
Printer (USB(A)) port: Connecting the printer offered with this device.
Computer (USB(B)) port: Connecting a computer.
Adapter port (ADAPTER): Connecting an adapter.
Power switch: It can be used to turn on/off the power.
ZIGBEE port: In case of using wireless communication with computer, it can be used to connect ZIGBEE
(Wireless communication). Wireless connecting is possible with manager program. (Wireless
communication –Option)
When you choose a height meter as option, it will be connected to ZIGBEE port.
Blood Pressure
monitor port
Printer port
Computer
port
Adapter port
Power switch
ZIGBEE port

User Manual BC300
TERM AND FUNCTION OF EACH PART_17
It is impossible to use both ZIGBEE (Wireless communication) and height meter. When height meter
is connected, you can not use wireless communication.
Base Part
Locking handle: When transport is necessary, the column can be folded down by turning the screw
counterclockwise. During this process, hold the column with one hand and turn the screw with another
hand.
Weight scale: It is equipped with plate electrodes and measures weight.
Plate electrode: Impedance is measured from these plate electrodes. The user should step them in
bare feet.
Weight scale
Plate
electrode
Locking
handle

SELVAS Healthcare, Inc.
18_TERM AND FUNCTION OF EACH PART
Bottom of the head part
Start button: Start button after input of personal data.
Note
Head part is connected to main body by limited-length curl cord. It allows measuring
people in 100 –200 cm height.
After the measurement, return the head to the original position.
For accurate measurement, lift the head up after turning on the power and measuring
weight.
Start button

User Manual BC300
TERM AND FUNCTION OF EACH PART_19
Key Pad
button: When you press this button at initial screen, you can search ID and check the recent
results of searched ID. Print the result with PRINT button.
button: You can select gender; male or female.
button: You can print out the result sheet.
Number 1~9, alphabet button: You can input ID using this button.
(ex: If you want to input number ‘1’, press button 4times: 1→A→B→C)
Button: You can delete one letter when entering ID.
You can put •when entering height.
Button: You can enter 0 and give a space while entering ID.
You can input 0 when entering age and height.
Button: You can delete entered ID or whole data.

SELVAS Healthcare, Inc.
20_TERM AND FUNCTION OF EACH PART
Basic Package
Basic package of this product is composed of
①Main body
②User guide
③Body composition management program (CD)
④A4 Result Sheet
⑤USB cable
⑥Power cable and adapter
①Main body
②User guide
③Program (CD)
④A4 Result Sheet
⑤USB cable
⑥Power cable and
adapter
The model or specification are subject to change according to the market demand.