Sennheiser MM 30I - User manual

QuickGuide
Notice d’emploi
빠른 안내서
คำแนะนำแบบสั้น
Kurzanleitung
快速指南
快速指南
|
|
|
Sennheiser Communications A/S Printed in China
Langager 6, 2680 Solrød Strand, Denmark Publ. 10/10
www.senncom.com A01
MM 30i
Smart Remote
with Mic

MM30i_SECOM.book Seite 6 Dienstag, 12. Oktober 2010 1:33 1
1
2
3

MM30i_SECOM.book Seite 6 Dienstag, 12. Oktober 2010 1:33 1
B
A

1
Connecting the remote control
Do not cover the microphone
Adjusting the volume
왘 Press the + or - button.
Controlling audio functions
왘 Press the button
once: Play/pause a track
twice: Play next track
3 times: Play previous track
Controlling phone functions*
To accept/end a call:
왘 Press the button.
To reject a call:
왘 Press and hold the button for 2 seconds.
To activate Voice Control:
왘 When the Home Screen of your iPhone/iPod is
displayed, press and hold the button for
2 seconds. Say your voice command.
*This function is not supported by all iPhone/iPod
models.
A
B
1
2
3
EN
MM30i_SECOM.book Seite 1 Dienstag, 12. Oktober 2010 1:33 1

2
Manufacturer Declarations
Declaration of Conformity
Sennheiser Communications A/S gives a warranty
of 24 months on this product. For the current
warranty conditions, please visit our website at
www.senncom.com under “Service & Support” or
contact your Sennheiser partner.
Declaration of Conformity
WEEE Declaration
The declarations are available at www.senncom.com.
This product is in compliance with the
essential requirements and other relevant
provisions of directives: EMC 2004/108/
EC, RoHS 2002/95/EC, WEEE 2002/96/EC.
Please dispose of this product by taking it
to your local collection point or recycling
center for such equipment.
EN
MM30i_SECOM.book Seite 2 Dienstag, 12. Oktober 2010 1:33 1

3
Statements regarding FCC
and Industry Canada
This device complies with Part 15 subpart b of the
FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including inter-
ference that may cause undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
SENNHEISER
Model No: MM 30i
FCC Declaration of Conformity (DoC)
We,
Sennheiser Electronic Corporation
Strat. Marketing • Stefanie Reichert
One Enterprise Drive • Old Lyme •
CT 06371 • USA
Tel: [phone], ext. 144
Fax: [phone]
declare the above device comply with the requirements of Federal Communications Commission.
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: John Falcone
EN
MM30i_SECOM.book Seite 3 Dienstag, 12. Oktober 2010 1:33 1

4
are designed to provide reasonable protec-
tion against harmful interference in a resi-
dential installation. This equipment gener-
ates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
EN
MM30i_SECOM.book Seite 4 Dienstag, 12. Oktober 2010 1:33 1

5
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This class B digital apparatus complies with the
Canadian ICES-003.
Changes or modifications made to this equipment
not expressly approved by Sennheiser electronic
Corp. may void the FCC authorization to operate
this equipment.
EN
MM30i_SECOM.book Seite 5 Dienstag, 12. Oktober 2010 1:33 1

“Made for iPod”, “Made for iPhone” and “Made for iPad” mean
that an electronic accessory has been designed to connect
specifically to iPod, iPhone, or iPad, respectively, and has been
certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
iPhone and iPod are trademarks of Apple Inc., registered in the U.S.
and other countries. iPad is a trademark of Apple Inc.
„Made for iPod“, „Made for iPhone“ und „Made for iPad“
bedeuten, dass ein elektronisches Zusatzgerät speziell für den
Anschluss an den iPod, das iPhone bzw. das iPad konstruiert ist
und vom Entwickler dahingehend zertifiziert wurde, dass es den
Apple-Leistungsnormen entspricht. Apple übernimmt keine
Gewähr im Hinblick auf die Verwendbarkeit dieses Gerätes oder
dessen Konformität mit den Standards für Sicherheit und
Funkentstörung.
iPod und iPhone sind in den USA und anderen Ländern eingetrage-
ne Marken von Apple Inc. iPad ist eine Marke von Apple Inc.
“Made for iPod”, “Made for iPhone et “Made for iPad” signifient
qu’un accessoire électronique a été développé spécifiquement
pour l’iPod, l’iPhone, ou l’iPad et que son développeur certifie qu’il
répond aux normes de performance Apple. Apple n’est pas
responsable du fonctionnement de cet accessoire ni de sa
conformité aux normes réglementaires et de sécurité.
iPod et iPhone sont des marques déposées d’Apple Inc.,
enregistrées aux Etats-Unis et dans d’autres pays. iPad est une
marque d’Apple Inc.
In compliance with:

“Made for iPod”, “Made for iPhone” and “Made for iPad” mean
that an electronic accessory has been designed to connect
specifically to iPod, iPhone, or iPad, respectively, and has been
certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
iPhone and iPod are trademarks of Apple Inc., registered in the U.S.
and other countries. iPad is a trademark of Apple Inc.
„Made for iPod“, „Made for iPhone“ und „Made for iPad“
bedeuten, dass ein elektronisches Zusatzgerät speziell für den
Anschluss an den iPod, das iPhone bzw. das iPad konstruiert ist
und vom Entwickler dahingehend zertifiziert wurde, dass es den
Apple-Leistungsnormen entspricht. Apple übernimmt keine
Gewähr im Hinblick auf die Verwendbarkeit dieses Gerätes oder
dessen Konformität mit den Standards für Sicherheit und
Funkentstörung.
iPod und iPhone sind in den USA und anderen Ländern eingetrage-
ne Marken von Apple Inc. iPad ist eine Marke von Apple Inc.
“Made for iPod”, “Made for iPhone et “Made for iPad” signifient
qu’un accessoire électronique a été développé spécifiquement
pour l’iPod, l’iPhone, ou l’iPad et que son développeur certifie qu’il
répond aux normes de performance Apple. Apple n’est pas
responsable du fonctionnement de cet accessoire ni de sa
conformité aux normes réglementaires et de sécurité.
iPod et iPhone sont des marques déposées d’Apple Inc.,
enregistrées aux Etats-Unis et dans d’autres pays. iPad est une
marque d’Apple Inc.
In compliance with:
USA FCC Part 15,
subpart b
Canada ICES-003
Europe
Australia /
New Zealand
China
15