Sensitech ThermoAlert User manual

Millions Depend on the Integrity of Your Product.
Sensitech’s Mission is to Ensure that Integrity.
ThermoAlert™
Indicator
Instructions For Use
The Tools That Turn Information Into Power
For more information, contact our client services
group at 800-843-8367.
Sensitech Inc. • 800 Cummings Center, Suite 258X • Beverly, MA 01915
1-800-843-8367 • [phone] • Fax [phone] • www.sensitech.com
TempTale Manager®
Desktop Software
TempTale®4 Monitor
© 2014 Sensitech, Inc. All Rights Reserved. T83001710 Rev. C 07/09/14
RF Monitoring
TagAlert®Indicator
Data Management Services
TempTale®4 USB Monitor

Starting a ThermoAlert™ Indicator
• PushtheStartbuttononthefrontofthedeviceandholditfor
approximately 3 seconds.
• Thedisplaywillrespondwitha“”andashing“”icononce
per second. (Figure 1).
• Removethebackstickerlabelandafxtheindicatortoaninstruction
 cardordirectlytoaclean,drysurfaceontheproductorpackage.
• Afterthestartdelayperiodhasexpired,theThermoAlertwillbegin
 monitoringtime-temperaturealarmconditions.
Reading a ThermoAlert Indicator
• Oncethepackagehasarrivedatitsdestination,removetheThermoAlert
 indicatorandimmediatelyexaminetheindicatordisplayscreen.
• Ifthedisplaypresentsa“”,noalarmshavebeenactivatedduring
 thetrip(Figure 1).
• Ifthedisplaypresentsan“”,analarmhasbeenactivated.
 – Ifthedisplaypresents“”,thehightemperaturealarm(>)hasbeen
activated. (Figure 2).
 – Ifthedisplaypresents“”,thelowtemperaturealarm(<)hasbeen
activated. (Figure 2).
• IfbothHIandLOalarmsareactivatedortheindicatoroperationlifehas
 expired,thedisplaywillpresent“”ontherightsideofthedisplay.
(Figures 3 and 4).
Figure 1
Figure 2
Figure 3 Figure 4