Sensitech TEMPTALE ULTRA BLE User manual

© 2023 Carrier. All Rights Reserved.Page 1 of 4
800 Cummings Center • Suite 258X •Beverly, MA 01915-6197• [phone] • [phone] • Fax [phone] Feb 2023
Getting Started Guide

© 2023 Carrier. All Rights Reserved.Page 2 of 4
800 Cummings Center • Suite 258X •Beverly, MA 01915-6197• [phone] • [phone] • Fax [phone] Feb 2023
For a full-size printout of this Guide, go here: https://www.sensitech.com/en/support/user-manuals/
Min. System Requirements ●iPhone 7 or higher running iOS 11+ ●Android 7.1+ ●Samsung Galaxy 8+
Tech Support sensitech.su[email protected] or EMEA: [phone] or Hong Kong: [phone]
1. On the smartphone, from the Apple Store or Google Play store, download and install the TempTale®App 3.1 (see figure 5 ).
2. Open the TempTale®App; allow the app access to the smartphone Bluetooth (tap OK).
3.
– Tap
Get Started.
4.
– Tap both
I accept
options then tap
I Agree.
5.
– Complete and Save
User Profile
.
Note:
You can select the type of
language you want when you download
data to a PDF. Set the
PDF Language
in
the User Profile.
Once the TempTale®App opens, the app automatically connects to TempTale®Ultra BLE monitors within range and displays a
list of monitor cards on the Nearby BLE Monitors tab (
figure 1 ). View monitor data by downloading data to the TempTale®App.
figure 1 – Nearby BLE Monitors tab
Tap white card to download monitor data
to app (monitor card turns blue).
figure 2 – Monitor card Icons
figure 3 – Monitor card Action buttons

© 2023 Carrier. All Rights Reserved.Page 3 of 4
800 Cummings Center • Suite 258X •Beverly, MA 01915-6197• [phone] • [phone] • Fax [phone] Feb 2023
Tap a monitor card to view its details.
figure 4 – Monitor Card Details
Nearby BLE Monitors tab Toolbar icons
Bluetooth®–
tap to return to the
Nearby BLE Monitors
tab
NFC Scan
– tap to scan NFC
monitors; to download monitor
data, touch phone to monitor
Download All –
tap to download
multiple BLE monitors’ data
Action
menu – tap to
Start/Stop
,
Reset
,
Update,
Export
, or
Delete
(data from app)
Monitor card Details, Toolbar icons
Home
– tap to go to
My Downloads
Share
– tap to Export to PDF or
TTV
Temp Graph
– tap to view
time/temperature details
Delete Monitor Data
from App
–
clears downloaded monitor data
from app
Action
menu - tap to
Start/Stop
,
Reset
,
Update,
Export
, or
Delete
(data from app)
Download the TempTale®Ultra BLE Monitor
Data Using the TempTale® App.
Single Monitor Data Download
On the
Nearby BLE Monitors
tab, on any white
monitor card, tap
Download
(
figure 7
).
Note: Once downloaded, the monitor card turns
blue.
Multiple Monitor Data Download
1. On the
Nearby BLE Monitors
tab, on the bottom
toolbar, tap
Download All
.
2. Select the state that you want the monitor in
after download is complete:
•
Stop Monitor:
Stop recording.
•
Stop Monitor and Reset:
Stop recording and
reset with same configuration (for multi-use
configured monitors only).
•
Keep Monitor Running:
Continue recording.
Additional Actions
1. On the bottom toolbar, tap
Actions
.
2. Select
Start/Stop
,
Reset
,
Update,
Export
, or
Delete
(removes the monitor card and its data
from the app).
Export and Share the TempTale®Ultra BLE Monitor Data using the TempTale®App
To export Monitor Data, from the Monitor Details view:
1.
Tap
Share.
2.
On the bottom toolbar, tap
Share.
Share a PDF or TTV file.
3. With
PDF
selected you can:
4. Scroll to tap the
Share
option: email, text, etc.
5. Tap
Export
.
Note: If not stopped, monitor continues recording
after Export.
Add Originator Notes (Optional, Only
Before Monitor Starts Recording)
Originator Notes pass information to the
Delivery Driver and the Receiver (for example,
shipment tracking ID).
1. Tap the white card of a Not Started
monitor.
2. Tap
Edit Note
.
3. Enter text.
4. Tap
Done.
Note: For multiple use, configured monitors,
update Originator Notes before starting the
next trip.
Updates BLE monitor readings every 5
minutes if details card stays open and
smartphone / tablet remains awake

© 2023 Carrier. All Rights Reserved.Page 4 of 4
800 Cummings Center • Suite 258X •Beverly, MA 01915-6197• [phone] • [phone] • Fax [phone] Feb 2023
Manually Start the Monitor Recording
figure 5 – TempTale
®Ultra BLE monitor running
Restart/Reset the
Monitor from the
TempTale®App
(multi- use
configured monitors
only)
•If the monitor is
running, tap the
white area of the
monitor card; from
Monitor Download
Options
, select
Stop
Monitor and Reset
.
•If the monitor is
stopped, tap the blue
area of the monitor
card, and tap
Actions>Reset
.
Manually Stop the Monitor Recording
Push and hold
Red
Stop
Button
until the
Stop Sign
icon displays.
figure 6 – No Alarms
figure 7 – Triggered Alarms
Manually Reset the Monitor
(multi-use configured
monitors only)
1. Press and hold
Red
Stop
Button
on the monitor
(8 seconds) until the
blinking
CF
(figure 8)
displays on the LCD,
followed by
SEt
(figure 9).
figure 8 – CF, Ready for
Configuration
figure 9 – SEt, Setup is complete
2. Release the
Stop
button;
the blank LCD indicates
that the monitor is reset
with the same
configuration and ready
for use.
LED Status Indicator
Blinking GREEN
–
Monitor has started
Blinking BLUE
–
Connecting to TempTale®App
Press and hold 3 seconds to start until
the sun and/or hourglass icons appear
QR Scan to Download TempTale Mobile App
Use the smartphone Camera option to scan this
QR code to find the TempTale®app in the Apple
or Google Play mobile app stores.
TempTale
®Ultra BLE USB
Bluetooth®is a registered trademark of Bluetooth SIG.
Press to mark events in raw data that
display on the time/temperature graph