Sensitech FreezeAlert User manual

Millions Depend on the Integrity of Your Product.
Sensitech’s Mission is to Ensure that Integrity.
FreezeAlert™
Indicator
Instructions For Use
The Tools That Turn Information Into Power
For more information, contact our client services
group at 800-843-8367.
Sensitech Inc. • 800 Cummings Center, Suite 258X • Beverly, MA 01915
1-800-843-8367 • [phone] • Fax [phone] • www.sensitech.com
TempTale Manager®
Desktop Software
TempTale®4 Monitor
© 2014 Sensitech, Inc. All Rights Reserved. T83001550 Rev. C 07/09/14
RF Monitoring
TagAlert®Indicator
Data Management Services
TempTale®4 USB Monitor

Starting a FreezeAlert™ Indicator
• PushtheStartbuttononthefrontofthedeviceandholditfor
approximately 2 seconds.
• TheLCDdisplaywillrespondby“”(Figure 1)andashing
 the“”icononcepersecond.
• Afteractivation,removethebackstickerlabelandafxtheindicator
 toaninstructioncardordirectlytoaclean,drysurfaceontheproduct
or package.
Reading a FreezeAlert Indicator
• Oncethepackagehasarrivedatitsdestination,removetheFreezeAlert
 indicatorfromthepackageandimmediatelyexaminetheindicator.
• IftheLCDisdisplaying“”,noalarmshavebeentriggeredduring
 thetrip(Figure 1).
• IftheLCDisdisplaying“”,thealarmhasbeentriggered(Figure 2).
Figure 1 Figure 2