Seville Classics SHE15879B User manual

4
Wall Mounting Instructions (required when stacking more than 2 units high)
After stacking more than 2 units high, wall mounting is
required for safety.
Position the stacked units against a wall and insert the WALL
MOUNTING ANCHOR (H) into the wall (just above the top center
of the stacked units using a screw driver or power drill.
Next, wrap the WALL MOUNTING STRAP (I) around the top
horizontal back bar of the frame and loop it through the WALL
MOUNTING BRACKET (F). Using the WALL
MOUNTING SCREW (G), attached the WALL MOUNTING
BRACKET (F) into the WALL MOUNTING ANCHOR (H).
It's not recommended to stack more than 4 units high.
Interlock® Feature
Shelves can be removed and used to horizontally bridge multiple units to create a modular shelving system.
2 Units shown 3 Units shown 4 Units shown 5 Units shown
Do not sit on the rack. Do not drop heavy items on the rack. Place heavier items on the lower shelves and
light items on the top shelves. Do not move the rack while loaded. Do not move the rack by lifting the
shelves, lift the rack using the two top sides of the frame. If stacking more than two units high, please use
the wall strap for added safety. Do not stack more than 4 units high.
3-Tier Resin Slat Utility Shoe Rack
Specifications
Dimensions: 26.5" W x 12.2" D x 19.0" H
Weight capacity: 30 lbs. (13.6 kgs) per shelf
Weight: 11.3 lbs. (5.12 kgs)
Customer Service Information
Seville Classics, Inc.
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM - 4:30 PM (PST), Monday to Friday
Email: [e-mail]
Homepage: www.sevilleclassics.com
This product is covered by one or more U.S. and foreign patents as found on www.sevilleclassics.com/patents
Thank you for choosing Seville Classics! We hope that you enjoy your new utility shoe
rack. Please read through this user guide for parts list, assembly instructions, frequently
asked questions and further contact information.
This product is covered by one or more U.S. and foreign patents as found on www.sevilleclassics.com/patents
Model No.: SHE15879B, SHE15881B, SHE15884B
1RC092023

2
Parts List
A. Frame (1 pc)
B. Shelf (3 pcs)
C. Feet (4 pcs)
D. Cap (4 pcs)
E. Stacking Pin (4 pcs)
F. Wall Mounting Bracket (1 pc)
G. Wall Mounting Screw (1 pc)
H. Wall Mounting Anchor (1 pc)
I. Wall Mounting Strap (1 pc)
Please make sure you have all the parts on this list
If you’re missing parts, contact us for replacements at
[phone] or send an email to Su[email protected]
Assembly Instructions
An assembly video is available, to view scan this QR code with your phone.
STEP 1.
Screw the FEET (C) into the legs of
the FRAME (A).
If only building one unit, insert the
CAPS (D) into the top of the
FRAME (A).
STEP 2.
Insert the bottom SHELF (B)
diagonally into the FRAME (A)
and position the shelf above the
support bars located on the sides of
the frame.
Rotate the SHELF (B) until the clips
on the shelf rest on the side bars of
the FRAME (A). Press down firmly on
either side of the shelf to ensure the
shelf clips securely attach to the
frame.
Repeat Step 2 for the remaining
two shelves.
Stacking Multiple Shoe Racks (optional)
Build a second shoe rack and screw
the STACKING PINS (E) into the legs
of the FRAME (A) instead of the feet.
Lift the top unit up and onto the bottom
unit. Line up the four STACKING PINS
(E) with the top corners of the bottom
unit. Press down firmly.
Make sure the bottom unit does not
have the CAPS (D) inserted into the
top corners.