Woodard RXAW-408T User manual

1 of 2
Diagram 1
Diagram 2
Willow Springs Woven Chat Table
RXAW-408T
Assembly Instructions
Step 1: Remove protective wrapping first. Then lay all parts on floor and identify all parts packed in carton
against attached parts list.
Step 2: Lay tabletop (A) upside down on floor, so bottom is facing up. Place a protective soft material on
floor before placing tabletop of table face down on floor to avoid scratching.
Step 4: Make sure all bolts are aligned properly and tightened sufficiently. Then with the second people's
help to turn the table over onto it's legs carefully resting it on flat floor surface as shown in Diagram 2.
NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND TIGHTENED
PROPERLY AND SECURELY.
Step 3:Attach Table Leg (B) to the Table Top (A) as shown in Diagram 1, using Bolt(C) and Washer (D).
A
B
C
D
C
D

2 of 2
Ref Part Name Part Image Qty Ref Part Name Part Image Qty
ATable Top 1DWasher (M6) 12
BTable Legs 4EHex Wrench 1
CBolts (1/4") 12
PRINTED IN CHINA
WOODARD
Customer Service Hours
8:00am-5:00pm CST Monday to Friday
Phone: [phone] Fax: [phone]
PART LIST