Seville Classics airLIFT OFF65871 User manual

AIRLIFT® Tempered Glass Electric Standing Desk
with Dual USB Charger
Models: OFF65871, 2, 3
Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand
desk. Please read through this user guide for parts list, instructions, frequently asked
questions and contact information.
102018

2
Welcome!
We at Seville Classics® are thrilled that you’ve chosen to go
AIRLIFT®! Our desks are some of the easiest to use, most versatile
and sophisticated electronic desks on the market. With this, you
can stay active throughout the day without sacricing productivity.
Choosing a height-adjustable desk is not just a convenient
upgrade—it’s a healthy one! Too much sedentary behavior can
present a real health risk, even for people who are already
healthy. Simply getting up throughout the day and moving is a
great way to ght the consequences of too much sitting.
AIRLIFT® is here to help.
Please read through this manual for more information regarding
your AIRLIFT® Tempered Glass Electric Standing Desk
with Dual USB Charger.
Thank you for choosing Seville Classics®! We hope you will enjoy
this desk for many years to come.

3
5
6
7
8
8
9
10
11
12
13
14
15
16
16
Table of Contents
SAFETY INSTRUCTIONS ……………………………………………………………..
COMPONENT DIAGRAM .…………………………………………………………..
PARTS LIST ………………………………………………………………………………..
ASSEMBLY INSTRUCTIONS ………………………………………………………..
Unpack ……………………………………………………………………………...
Install Left Leg …………………………………………………………..………
Install Right Leg ...……………………………………………………………...
Connect Motors ………………………………………………………………..
Final Steps ………………………………………………………………………...
INITIALIZATION & USE INSTRUCTIONS ……………………………………...
TROUBLESHOOTING ………………………………………………………………...
WARRANTY INFORMATION ……………………….……………………………...
SPECIFICATIONS ………………………………………………………………………..
CUSTOMER SERVICE INFORMATION ………………………………………….

4

5
Safety Instructions
FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND
OPERATING INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS
PRODUCT MAY RESULT IN SERIOUS BODILY INJURY
 Read and understand this manual before attempting to install or
 Assure that everyone who uses this product is informed of the contents of this manual. This
is the responsibility of the Purchaser.
 Not intended for use by young children or for those persons who require supervision.
 Do not open any of the components – legs, control box, or controller. There is a risk of
electric shock.
 Assemble desk on a at and level surface.
Before You Begin
Layout all components and hardware. Visually examine and make sure components are free of
damage. If there is visual damage to any component, it must not be installed.
Two people are needed to turn or move the desk and some of it’s components. When moving or
turning the assembled desk, grab the legs, not the desk top.
Make sure to assemble on a soft and non-abrasive surface to avoid scratches.
Check all connections and cables. Make sure control box is connected to a power outlet.
If the control box makes unusual noises or emits an odor, switch power o immediately.
Use & Liability
Safe use of this product is possible only when the operating instructions are read completely
and the instructions contained are strictly observed. Persons who do not have the necessary
experience or knowledge of this product must not use the product. Persons with reduced
physical or mental abilities should not use this product, unless they are under supervision or
they have been thoroughly instructed in the use of the apparatus by a person who is
responsible for the safety of these persons. Children should be closely supervised to ensure that
they do not play with this product.
The desk MUST be INITIALIZED before rst use.
Read the INITIALIZATION chapter prior to operation.

6
Component Diagram
Tempered Glass Top
Foot
Legs
Foot
Drawer
Legs
Controller

7
Parts List
Please make sure you have all the parts on this list.
Extra washers are included and some may remain unused after assembly.
If you’re missing parts, contact us for replacements at [phone] or send an email
to [email protected]
A. Top
C. Feet
D. Screws
B. Legs
E. Hex key

8
Assembly Instructions: Unpack
Examine the location where you'll be
using the desk. Make sure there is a
grounded outlet or power strip nearby.
110-120V
Remove the box lid and remove inner box containing parts.
Leave the TOP (A) in the box.
Layout all components and hardware. Examine each and make sure
components are without damage.
Top Legs (x2) Feet (x2)

9
STEP 1. Fit left LEG (B) to frame underneath TOP (A).
Assembly Instructions: Install Left Leg
Attach with SCREWS (D) using HEX KEY (E).

10
Assembly Instructions: Install Right Leg
STEP 1. Fit right LEG (B) to frame underneath TOP (A).
Attach with SCREWS (D) using HEX KEY (E).

11
Assembly Instructions: Connect Motors
STEP 4. Plug in motors on LEGS (B) to controller box plugs on TOP (A).

12
Assembly Instructions: Final Steps
Lift with 2 people
STEP 5. Attach FEET (C) to LEGS (B) with SCREWS (D) and HEX KEY (E).
Tip! Take this time to make sure all screws have been tightened.
STEP 6. With another person, lift and tilt the table onto its feet.
Remove tape

13
Initialization & Use Instructions
DESK MUST BE INITIALIZED BEFORE YOUR FIRST USE
Initialize
Press and hold the UP ARROW and DOWN ARROW simultaneously on the controller until
three blinking zeros appear on the display.
The desk will descend to its lowest height, then rise to its highest, and then descend to
middle-height. Desk is ready when 38 (+/- 1) appears on the display.
It may be necessary to reinitialize the desk from time-to-time due to power outages or
simply due to use.
Adjust Height
Press and hold the UP ARROW to lift.
Press and hold the DOWN ARROW button to lower.
Save Height
Press and hold the M button + Number buttons for 1 to 3 seconds until the displayed
number starts blinking.
Recall Height
Press the desired Number button twice, or press and hold to adjust to the height stored at
that number.
Advanced Mode
Long press the M button for 6 seconds to enter the advanced mode.
Users can adjust the lowest height during normal operation in this mode.
After adjustment, press M for 6 seconds to conrm the change.
Up Arrow Down ArrowMemorySave Memory Display USB Charging Port

14
Troubleshooting
Error Codes
Code Acon
- - - Re-initialize the system.
Control system
malfunction Please contact customer service.
Voltage irregularity Please contact customer service.
Over-load protection
activated Remove weight from desk top until error clears.
Overheat or power
supply failure Let desk cool down for 10 minutes before using again
Irregular Hall signal from
Motor A
Unplug and re-plug power cord, and reset the desk. If problem
persists, switch motor cables at the control box and re-initialize.
Motor A malfunction Unplug and re-plug power cord, and re-initialize. If problem persists,
switch motor cables at the control box and re-initialize.
Motor B malfunction Unplug and re-plug power cord, and re-initialize. If problem persists,
switch motor cables at the control box and re-initialize.
Lose connection or,
irregular Hall signal
Check all cables and make sure they're connected.
Switch motor cables at the control box and re-initialize.
Irregular Hall signal on
Motor B
Unplug and re-plug power cord, and re-initialize. If problem persists,
switch motor cables at the control box and re-initialize.
Anti-collision protection
activated Remove objects from beneath the desk and re-initialize system.
Problem Acon
Desk does not go up or down and the con-
troller does not illuminate when any button
is pressed.
Check all connections. Make sure power cord is plugged into the con-
trol box and a power outlet. Press any button on the
controller and make sure it illuminates. Re-initialize the desk.
Desk does not go up or down and the con-
troller illuminates when any button is
pressed.
Unplug the power cord and re-plug after 10 seconds.
Re-initialize the desk. If the problem persists, switch motor cables from
one port to another at control box and re-initialize again.
Columns do not go up evenly. Unplug the power cord and re-plug after 10 seconds.
Re-initialize the desk. If the problem persists, switch motor cables from
one port to another at control box and re-initialize again.
Desk wobbles excessively. It is normal that desk moves slightly at standing height when in use.
Retighten all screws and bolts, and adjust leveling feet to make sure
table stands level.
HOT is displayed on the panel. The desk motors are overheated. Stop using the desk for 10 minutes
and let them cool down.
Desk legs are noisy. It is normal that desk makes noise when the stages move past each
other. Apply silicon-based lubricant if it is unusually noisy.

15
Warranty Information
7-Year Non-Electronic Component Warranty
Seville Classics, Inc. warrants to the original retail purchaser that if this product proves to be defective in
material or workmanship, we will replace the aected non-electronic part(s) for a period of seven
years on Seville Classics AIRLIFT® Tempered Glass Electric Standing Desk with Dual USB Charger from
the date of original purchase.
2-Year Electronic Component Warranty
Seville Classics, Inc. warrants to the original retail purchaser that if this product proves to be defective in
material or workmanship we will replace the aected electronic part(s) for a period of two years on
Seville Classics AIRLIFT® Tempered Glass Electric Standing Desk with Dual USB Charger from the date of
original purchase.
Except for the express warranty set forth above and except to the extent prohibited by applicable law,
Seville Classics grants no other express or implied warranties with respect to the product, its tness for
any purpose, its quality, or its merchantability. The liability of Seville Classics under the warranty shall be
limited to the amount paid by the customer for the product. Seville Classics shall not be liable for any
loss of use of the product, or other incidental or consequential costs, expenses or damages incurred by
the customer or other user.
This warranty covers only the Seville Classics AIRLIFT® Tempered Glass Electric Standing Desk with Dual
USB Charger sold in the United States of America and Canada. Some states do not allow the exclusion or
limitations of implied warranties or consequential damages, so the above limitations or exclusions may
not apply to you. This warranty gives you specic legal rights, and you may also have other rights that
vary from state to state.
During the applicable warranty period, Seville Classics, at its option, will either refund the original
purchase price or replace the aected part(s) with comparable part(s) when the aected part(s) are
returned, postage prepaid, to the address below:
Seville Classics Inc.
19401 South Harborgate Way
Torrance, CA 90501 – 1322 U.S.A.
To obtain service under this warranty, you must:
1. Register your product at www.SevilleClassics.com/warranty
2. Contact our customer service at [phone] or email [e-mail];
3. Return the aected part(s) postage prepaid to Seville Classics pursuant to our customer service
representative; and
4. Include in the package:
A. A copy of the original bill of sale, your charge or credit receipt, or other satisfactory proof of
the date of the original purchase date of the product, and the price paid; and
B. A short detailed description of the problem, the name and phone number of the contact
person.

16
Specications
Width: 47.6"
Depth: 24"
Maximum Height: 47"
Minimum Height: 29"
Footprint: 45.7" W x 23.75" D
Lifting Speed: 1.5" per second
Base Weight: 82.9 lbs.
Customer Service Information
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com
102018