Seville Classics WEB582 User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]
Homepage: www.SevilleClassics.com
FAQS
Q. What size drill bit do I need?
A. Use a 7 mm bit for drilling mounng points.
Q. Can I install to drywall?
A. Yes! Use the included anchors for installing to drywall.
Q. Can I install to wood/studs?
A. Yes! Use the included screws to install to wood and studs.
Q. Can I install to plaster or brick?
A. Yes, but you will need masonry specic anchors and drill bit (not included).
Q. How much weight can I hold?
A. Shelf holds up to 100 lbs., evenly distributed.
Q. How do I keep it clean?
A. Simply wipe down with mild soap and dry with washcloth.
Specicaons
Dimensions: 36" W x 12" L x 10" H
Weight capacity: 100 lbs.
6-2018
36" Stainless-Steel Wall Shelf
Model: WEB582
Thank you for choosing Seville Classics! We hope that you enjoy your wall
shelf! Please read through this user guide for parts list, assembly instrucons,
frequently asked quesons and further contact informaon.
6-2018

Parts List
A. Shelf (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
Required Tools (not included)
1
B. Bracket (2)
C. Anchors (6)
D. Screws (6)
E. Template (1)
Level Stud Finder Power Drill
/w 7 mm bit
Screwdriver
Assembly Instrucons
2
STEP 1.
Posion the shelf using the
included TEMPLATE (E) with a
stud nder and bubble level.
Mark points with pencil.
Make holes with electric drill
and insert ANCHORS (B)
unl ush with wall.
TIP: If stud is present, install
with screws only.
STEP 2.
Posion holes on SHELF (A)
over anchor points and aach
with SCREWS (D).
STEP 3.
Fit BRACKET (B) beneath shelf
and align holes with
ANCHORS (C).
Aach BRACKET (B) to wall
with SCREWS (D).
Repeat for other side.