Seville Classics UltraHD 20225 User manual

TR230912
ASSEMBLY INSTRUCTIONS
28in. W X 25in. D X 34.5in. H
(71.1cm x 63.5cm x 87.6cm )
UltraHD® Rolling Cabinet (Model No. 20225, 20081, 20082, 20083)
Granite Graphite Red White
Reference page 13 for special care and
maintenance of stainless steel

1

Small Drawer Assembly
Large Drawer Assembly
2

PARTS LIST
(#4) LEFT PANEL x 1 PC
(#3) RIGHT PANEL x 1 PC
(#1) BOTTOM PANEL x 1 PC
(#2) FRONT FRAME x 1 PC
Please check the parts carefully according to the parts list. If you are missing any parts, please
contact our customer service department (please refer to page 14 ).
(#7) UPPER BACK PANEL x 1 PC
(#8) DOOR x 1 PC
(#5) MIDDLE PANEL x 1 PC
(#6) BOTTOM BACK PANEL x 1 PC
3

PARTS LIST
(#12-1) SMALL DRAWER FRONT PANEL x 3 PCS
(#11) PUSH BAR x 1 PC
(#12-4) SMALL DRAWER BACK PANEL x 3 PCS
(#12-5) DRAWER BASE PANEL x 4 PCS
(#12-3) SMALL DRAWER RIGHT PANEL x 3 PCS
(#12-2) SMALL DRAWER LEFT PANEL x 3 PCS
(#9) MIDDLE SHELF x 1 PC
(#10) SOLID HARDWOOD TOP x 1 PC
Please check the parts carefully according to the parts list. If you are missing any parts, please
contact our customer service department (please refer to page 14 ).
4

PARTS LIST
(#13-4) LARGE DRAWER BACK PANEL x 1PC
(#16) DRAWER MAT x 4 PCS
(#17) BUMPER x 4 PCS
(#14) SWIVEL WHEEL WITH BRAKE x 2 PCS
(#15) SWIVEL WHEEL W/O BRAKE x 2 PCS
(#13-3) LARGE DRAWER RIGHT PANEL x 1 PC
(#13-1) LARGE DRAWER FRONT PANEL x 1 PC
(#13-2) LARGE DRAWER LEFT PANEL x 1 PC
Please check the parts carefully according to the parts list. If you are missing any parts, please
contact our customer service department (please refer to page 14 ).
5

PARTS LIST
(#24) PHILLIPS SCREWDRIVER x 1 PC
(#25) SCREW D (M8 x 18) x 16 PCS
(#20) SCREW A (M4 x 10) x 58 PCS
(#21) SCREW B (M4 x 8) x 95 PCS
(#22) DOOR / DRAWER KEY x 2 STRINGS
(#23) HOOK x 4 PCS
Please check the parts carefully according to the parts list. If you are missing any parts, please
contact our customer service department (please refer to page 14 ).
(#18) RIGHT BACK CORNER PROTECTOR x 1 PC
(#19) LEFT BACK CORNER PROTECTOR x 1 PC
6

PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please
contact our customer service department (please refer to page 14 ).
(#26) SCREW C (M4 x 18) x 16 PCS
(#27) WASHER（M4）x 4 PCS
7

TIP:
Step 1.
Step 2.
Step 3.
UltraHD® Tall Storage Cabinet (Model No. 20225, 20081, 20082, 20083)
Attach the Left Panel (#4) to Front Frame (#2) and Solid
Hardwood Top (#10). Make sure the “Top” of the Left
Panel (#4) is on the Solid Hardwood Top (#10) and the
screw holes are lined up to the Front Frame (#2). Use
Screw Driver (#24) and Screw A (#20) with Washer (#27)
to tighten the Left Panel (#4) to the Front Frame (#2) and
then to the Solid Hardwood Top (#10).
Install the Left Panel (#4).
A magnetic screwdriver is included for your
convenience. If a power screwdriver is used, keep on a
low torque setting.
Locate the Front Frame (#2) and attach to the "Front" of
the Solid Hardwood Top (#10) using Screw Driver (#24)
and Screw A (#20).
Note: The screw holes have some tolerance so make sure
that the top and sides of the Front Frame are flushed with
the Solid Hardwood Top – this may save time by avoiding
having to make slight adjustments later.
Open the package, remove and place all parts to the
side. Then open the package of the Solid Hardwood
Top (#10).
Note: The Solid Hardwood Top is packed within an
inner cardboard box.
*NOTE: We recommend using TWO people to assemble the cabinet.
Install Front Frame (#2).
Front
Back
Front
Back
Back
Front
8

Step 4.
Step 5.
Step 6.
UltraHD® Tall Storage Cabinet (Model No. 20225, 20081, 20082, 20083)
Install the Right Panel (#3).
Install the Middle Panel (#5).
*NOTE: We recommend using TWO people to assemble the cabinet.
a. Attach the Upper Back Panel (#7) between the Left
Panel (#4) and Right Panel (#3). Make sure the “Top” of
the Upper Back Panel (#7) is to the Solid Hardwood Top
(#10) as the sticker indicates. Line up the screw holes and
use Screw A (#20) to tighten up the Upper Back Panel to
the Solid Hardwood Top (#10), Left Panel (#4) and Right
Panel (#3).
b. Attach Bottom Back Panel (#6) between the Left Panel
(#4) and Right Panel (#3). Make sure the “Top” of the
Bottom Back Panel (#6) is on the Upper Back Panel (#7) as
the sticker indicates. Line up the screw holes and use
Screw A (#20) to tighten the Bottom Back Panel (#6) to
the Upper Back Panel (#7), Left Panel (#4) and Right Panel
(#3).
Attach the Middle Panel (#5) into the cabinets as
drawing to the left. Make sure the “Top” of the Middle
Panel (#5) is to the Solid Hardwood Top (#10) as the
sticker indicates. Use Screw A (#20) to tighten the
Middle Panel (#5) to the Bottom Back Panel (#6),
Upper Back Panel (#7) and Front Frame (#2).
Install the Upper Back Panel (#7) and Bottom Back
Panel (#6).
Attach the Right Panel (#3) to Front Frame (#2). Make
sure the “Top” of the Right Panel (#3) is on the Solid
Hardwood Top (#10). Use Screw Driver (#24) and Screw A
(#20) with Washer (#27) to tighten the Right Panel (#3) to
the Front Frame (#2) and then to the Solid Hardwood Top
(#10).
Back
Front
Front
Back
Front
Back
Front
Back
9

Step 7.
Step 8.
Step 9.
Step 10.
*NOTE: We recommend using TWO people to assemble the cabinet.
UltraHD® Tall Storage Cabinet (Model No. 20225, 20081, 20082, 20083)
Attach the Right Back Corner Protector (#18) and Left
Back Corner Protector (#19) to the back side of the
cabinet. Use Screw A (#20) to tighten them. Then attach
the Push Bar (#11) to the front side of the cabinet. Use
Screw A (#20) to tighten it.
Install Corner Protectors (#18 and #19) and Push Bar
(#11).
Attach Bumpers (#17) to the bottom four corners of the
cabinet. Use Screw C (#26) to tighten them.
Install the Bottom Panel (#1).
Install Wheels (#14 and #15).
Attach the Bottom Panel (#1) to the Left Panel (#4),
Right Panel (#3), Front Frame (#2) and Bottom Back
Panel (#6). Line up the screw holes and use Screw A
(#20) to tighten.
Attach Wheels (#14 and #15) to the Bottom Panel (#1)
and surrounding frame. Make sure the Swivel Wheels
with Brake are installed at the front side. Use Screw D
(#25) to tighten them.
Install Bumpers (#17).
Back
Front
Front
Back
Front
Back
10

Step 11.
Step 12. Install Small Drawer Base Panel (#12-5).
Step 13.
Step 14.
Repeat Steps 11-13 using Large Drawer Left Panel (#13-
2), Large Drawer Right Panel (#13-3), Large Drawer Front
Panel (#13-1), Large Drawer Back Panel (#13-4) and
Drawer Base Panel (#12-5) to assemble the Large
Drawer. Once assembled, you should have one Large
Drawer.
*NOTE: We recommend using TWO people to assemble the cabinet.
Fit and attach Small Drawer Side Panels (#12-2 and
#12-3) one at a time into the back of the Small Drawer
Front Panel (#12-1). Make sure the Drawer Side Panels
are placed in all the way making contact with the rear of
the Small Drawer Front Panel (#12-1). Line up the screw
holes and use Screw B (#21) to tighten them.
Install Small Drawer Side Panels (#12-2 and #12-3).
UltraHD® Tall Storage Cabinet (Model No. 20225, 20081, 20082, 20083)
Assemble and Install Large Drawer the same way.
From above, fit and attach Small Drawer Base Panel
(#12-5) between the two sides and into the back of the
Small Drawer Front Panel (#12-1). Use Screw B (#21) to
tighten.
Note: Do not fully tighten any one screw until all screws
are partially screwed in.
Install Small Drawer Back Panel (#12-4).
Attach the Small Drawer Back Panel (#12-4) to the rest
of the assembled drawer. Use Screw B (#21) to tighten.
Once you have the first Small Drawer assembled, repeat
Steps 11-13 to assemble the other two Small Drawers.
Once completed, you should have three Small Drawers.
11

WARNING:
Step15. Install Drawers into cabinet.
*NOTE: We recommend using TWO people to assemble the cabinet.
Check the key/lock, it must be unlcoked
before all the drawers are placed.
UltraHD® Tall Storage Cabinet (Model No. 20225, 20081, 20082, 20083)
a. Pull out the 2 bottom slides for the large
drawer.
b. Hook the large drawer between both slides,
make sure the slides hooks are inserted into
the square holes on the drawer side panels
completely.
c. Line up the screw holes, and using 4pcs
Screw B (#21) to tighten the drawer.
d. Repeat above steps to place the other
drawers.
A
B
C
12

Step 14.
Step 15.
Step 15.
UltraHD® Tall Storage Cabinet (Model No. 20225, 20081, 20082, 20083)
Stainless Steel Maintenance:
These parts have an UltraGuard® fingerprint resistant finish.
Do not use traditional stainless steel cleaners on this unit.
Lightly wipe off once a month with clean warm water and a
soft cloth (preferably a microfiber cloth). This is the safest
formula to prevent new stains from appearing over time
and manage unwanted fingerprints or grease marks.
Remember to always wipe in the direction of the surface
grain (NEVER ACROSS) and always use a lint-free cloth. Once
the surface is clean,thoroughly wipe dry with a soft
absorbent cloth.
Install the Door (#8)
Attach the Door (#8) to the unit using Screw B (#21)
to tighten.
Note: The screw holes on the door hinge have
tolerance, enabling the door to be adjusted and
centered in the door frame.
*NOTE: We recommend using TWO people to assemble the cabinet.
Place the Drawer Mats (#16) inside the Drawers.
Install the Middle Shelf (#9).
a. Decide the height for the Middle Shelf (#9), place
the Hooks (#23) into the hook slot and push down.
Note: The Middle Shelf has 4 Hooks at each corner
for support. Place the 4 Hooks at each corner and
make sure they are the same height.
b. Place the Middle Shelf (#9) into the cabinet and
push down onto the Hooks (#23).
Place Drawer Mats (#16)
13

Seville Classics, Inc.
19401 Harborgate Way Torrance, CA 90501 USA
Telephone: [phone] within USA
Fax: [phone]
Hours: 9:00am - 4:30pm (Pacific Standard Time)
E-mail: [e-mail]
Website & Online Store: www.sevilleclassics.com
UltraHD® Tall Storage Cabinet UltraHD® Mega Storage Cabinet
Model No. 16236 (Granite) Model No. 16238 (Granite)
Model No. 20143 (Graphite) Model No. 20148 (Graphite)
Model No. 20153 (Red) Model No. 20158 (Red)
Model No. 20133 (White) Model No. 20138 (White)
CONTACT INFORMATION
If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our
bilingual (English and Spanish) customer service department at:
***Please visit our website or call and inquire about our additional UltraHD Line***
UltraHD® Line
14

UltraHD® 4-Drawer Rolling Cabinet UltraHD® 6-Foot Height Adjustable Workbench
Model No. 20205 (Granite) Model No. 20292 (Granite)
Model No. 20252 (Graphite)
Model No. 20293 (Graphite)
Model No. 20258 (White)
UltraHD® Wall Cabinet with Open Shelf UltraHD® 2-Door Rolling Workbench
Model No. 20230 (Granite) Model No. 20262 (Granite)
Model No. 20140 (Graphite) Model No. 20142 (Graphite)
Model No. 20150 (Red) Model No. 20152 (Red)
UltraHD® Rolling Trash Bin
UltraHD® Lighted Workcenter
Model No. 20215 Model No. 20247 (Granite)
Model No. 20246 (Graphite)
Model No. 20157 (Red)
UltraHD® Line
15